Planning Drawings in Merton
Fixed-fee, MCIAT-chartered planning drawings for Merton homeowners — London Borough of Merton validation and local constraints handled from the start.
Merton runs from the sought-after Victorian villas and terraces of Wimbledon Village and South Wimbledon and the planned John Innes estate at Merton Park down through the interwar semis of Raynes Park and Morden to the historic Cricket Green at Mitcham and the streets of Colliers Wood. Loft conversions and rear extensions are the borough's signature projects, with strong conservation control around Wimbledon and Merton Park tightening design where it applies.
The character shifts across the borough. Conservation areas at Wimbledon Village, Wimbledon Common, the John Innes estate at Merton Park, Mitcham Cricket Green, Colliers Wood and Wimbledon West Side control materials, rooflines and front elevations, and the John Innes estate's distinctive Arts-and-Crafts character is protected especially closely, with permitted development often restricted there. Article 4 directions remove permitted development for HMO conversions in designated wards, and toward Raynes Park and Morden the council expects extensions to respect the consistent interwar building lines. Those interwar semis, however, frequently retain permitted development rights for rear extensions and lofts.
We prepare Merton planning drawings that respect the character of the specific area — the Arts-and-Crafts detailing of Merton Park, the villa streets of Wimbledon, and the suburban lines of Raynes Park and Morden — checking permitted development eligibility and any Article 4 or conservation constraint first. It is the same council-accepted drawing set an architect would produce, usually at around 30% less, with a fixed fee agreed up front, a roughly seven-day drawing turnaround and free redraws until the London Borough of Merton approves. Most householder applications are decided within the statutory eight-week period once validated, so we draw to the council's validation checklist from the outset.
Planning in Merton: what to know before you apply
Merton applies Article 4 directions to HMO conversions in designated wards and controls design within conservation areas such as Wimbledon Village, Wimbledon Common and the John Innes estate at Merton Park. For the borough's interwar semis around Raynes Park and Morden, rear extensions and lofts frequently qualify as permitted development — we confirm before drawing.
Typical Merton housing stock
Victorian and Edwardian villas and terraces around Wimbledon and South Wimbledon, the planned Arts-and-Crafts John Innes estate at Merton Park, and interwar semi-detached suburbia through Raynes Park, Morden and Mitcham.
Areas we regularly draw for in Merton
Wimbledon · Mitcham · Morden · Raynes Park · Colliers Wood · Merton Park · South Wimbledon · Wimbledon Village
What the numbers say about Merton planning decisions
These are London Borough of Merton’s own reported figures, published by government rather than estimated by us. They are what we design against — a borough that refuses one householder application in five needs a different drawing package from one that refuses one in twenty.
Householder decisions in Merton
Every householder application London Borough of Merton decided over the four quarters to 2026 Q1.
| Householder applications decided | 769 |
|---|---|
| Granted | 709 |
| Refused | 60 |
| GrantedEngland average 90% | 92% |
| Of which prior approvalsPrior approvals are granted far more often than full applications, so this share moves the rate above | 35% |
| Decided within 8 weeksExcludes prior approvals. England average 93% | 88% |
Source: Ministry of Housing, Communities and Local Government (PS2 district planning application statistics). Open Government Licence v3.0 Extracted 2026-08-16.
Permitted development in Merton
Larger householder extensions put to London Borough of Merton under the prior-approval route, and lawful-development certificates decided, over eight quarters.
| Prior approval not requiredWent ahead without a full application | 321 |
|---|---|
| Prior approval granted | 40 |
| Prior approval refused | 179 |
| Granted where a decision was neededFrom 219 determinations | 18% |
| Building upwards, prior approval refused | 0 |
| Certificates of lawful development decided | 156 |
Source: Ministry of Housing, Communities and Local Government (PS1 district planning application statistics). Open Government Licence v3.0 Extracted 2026-08-16.
Designated areas in Merton
Conservation areas London Borough of Merton has published to the national register, and when it designated them. Where a borough has supplied no Article 4 data the row is omitted rather than shown as zero.
| Conservation areas on the register | 28 |
|---|---|
| First designatedOf the 28 whose designation date the register records | 1,968 |
| Most recent designation | 1,997 |
Source: MHCLG Planning Data Platform. Open Government Licence v3.0 Extracted 2026-08-16.
If London Borough of Merton refuses: appeal outcomes
Planning appeals against London Borough of Merton determined by the Planning Inspectorate, 2021–2026. Enforcement notices and withdrawn cases are excluded.
| Appeals determined | 238 |
|---|---|
| Allowed | 68 |
| Dismissed | 170 |
| Householder appeals allowedFrom 116 householder appeals. England average 36% | 35% |
Source: Planning Inspectorate appeals casework. Open Government Licence v3.0 Extracted 2026-08-16.
Planning Drawings for Merton homes: the package and the process
A planning set is judged as a set, not as individual sheets. Every existing drawing needs its proposed counterpart at the same scale and orientation so the officer can read the change at a glance, each sheet needs its own number, title, scale bar and north point, and the whole package needs to survive being printed at A3 without a dimension becoming illegible.
We draw to the conventions validation teams expect: plans and elevations at 1:100 or 1:50, a location plan at 1:1250 with the site edged red, a block plan at 1:500, and sections cut where the change in level or roof form actually happens rather than where they are easiest to draw.
The drawing list itself changes with the building. A detached house needs four elevations; a mid-terrace needs two plus a section through the party walls to show what is not visible from outside. Getting that list right at the start is what stops a validation officer asking for a sheet three weeks in.
What is included in a planning drawing set?
A council will only validate an application that contains the right drawings at the right scale. Our standard planning set covers everything a London validation team expects.
- Site location plan (1:1250) and block plan (1:500)
- Existing floor plans, elevations and sections
- Proposed floor plans, elevations and sections
- Roof plans where relevant, with heights and materials annotated
- A design and access or heritage statement where the borough requires one
How are planning drawings different from building regulations drawings?
Planning drawings show what the building will look like and how it sits in its context. Building regulations drawings show how it will be built safely — structure, insulation, fire escape and drainage. Most projects need both; our Complete package covers the two together with structural calculations coordinated in-house.
How quickly can you produce planning drawings in London?
After a laser survey, a standard householder set is typically ready within 7 days. We review every drawing against your borough's validation checklist before it reaches a planner's desk, which is why our first-time approval rate sits around 96%.
| Drawing | Typical scale | What it shows |
|---|---|---|
| Site location plan | 1:1250 | The property in its street context, site edged red |
| Block plan | 1:500 | The building's footprint and position in the plot |
| Floor plans (existing & proposed) | 1:100 / 1:50 | Room layout, walls, openings and the proposed changes |
| Elevations (existing & proposed) | 1:100 / 1:50 | Each face of the building and how it changes |
| Sections | 1:100 / 1:50 | A cut through showing heights, levels and roof form |
Planning Drawings across Merton
Planning Drawings in Merton — FAQs
What scale should London planning drawings be?+
Do I need an architect to produce planning drawings?+
How many revisions are included in the fee?+
Can you draw from my existing plans?+
Do planning drawings guarantee approval?+
Do I need planning permission for an extension in Merton?+
What is special about building at the John Innes estate in Merton Park?+
What do Merton's HMO Article 4 directions affect?+
How long does Merton Council take to decide?+
How much do planning drawings cost in Merton?+
Get your free Merton planning assessment
Tell us your Merton address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.