MCIAT chartered drawings · Fixed fees across all 33 London boroughs

Free 2026 London Planning ReportHouse Extension Drawings in Merton

Rear extension opening onto a suburban garden, typical of a Merton Raynes Park or Wimbledon family-home project
Merton · London

House Extension Drawings in Merton

Fixed-fee, MCIAT-chartered house extension drawings for Merton homeowners — London Borough of Merton validation and local constraints handled from the start.

Free Merton planning assessment

Tell us your Merton address and project. A fixed quote and free planning appraisal land within one working day.

No obligation · No spam · Reply within 1 working day

Merton runs from the sought-after Victorian villas and terraces of Wimbledon Village and South Wimbledon and the planned John Innes estate at Merton Park down through the interwar semis of Raynes Park and Morden to the historic Cricket Green at Mitcham and the streets of Colliers Wood. Loft conversions and rear extensions are the borough's signature projects, with strong conservation control around Wimbledon and Merton Park tightening design where it applies.

The character shifts across the borough. Conservation areas at Wimbledon Village, Wimbledon Common, the John Innes estate at Merton Park, Mitcham Cricket Green, Colliers Wood and Wimbledon West Side control materials, rooflines and front elevations, and the John Innes estate's distinctive Arts-and-Crafts character is protected especially closely, with permitted development often restricted there. Article 4 directions remove permitted development for HMO conversions in designated wards, and toward Raynes Park and Morden the council expects extensions to respect the consistent interwar building lines. Those interwar semis, however, frequently retain permitted development rights for rear extensions and lofts.

We prepare Merton planning drawings that respect the character of the specific area — the Arts-and-Crafts detailing of Merton Park, the villa streets of Wimbledon, and the suburban lines of Raynes Park and Morden — checking permitted development eligibility and any Article 4 or conservation constraint first. It is the same council-accepted drawing set an architect would produce, usually at around 30% less, with a fixed fee agreed up front, a roughly seven-day drawing turnaround and free redraws until the London Borough of Merton approves. Most householder applications are decided within the statutory eight-week period once validated, so we draw to the council's validation checklist from the outset.

Rear extension opening onto a suburban garden, typical of a Merton Raynes Park or Wimbledon family-home project
Isometric illustration of a Merton home extension design
Proposed floor plan
Merton

Planning in Merton: what to know before you apply

Merton applies Article 4 directions to HMO conversions in designated wards and controls design within conservation areas such as Wimbledon Village, Wimbledon Common and the John Innes estate at Merton Park. For the borough's interwar semis around Raynes Park and Morden, rear extensions and lofts frequently qualify as permitted development — we confirm before drawing.

Typical Merton housing stock

Victorian and Edwardian villas and terraces around Wimbledon and South Wimbledon, the planned Arts-and-Crafts John Innes estate at Merton Park, and interwar semi-detached suburbia through Raynes Park, Morden and Mitcham.

Areas we regularly draw for in Merton

Wimbledon · Mitcham · Morden · Raynes Park · Colliers Wood · Merton Park · South Wimbledon · Wimbledon Village

What the numbers say about Merton planning decisions

These are London Borough of Merton’s own reported figures, published by government rather than estimated by us. They are what we design against — a borough that refuses one householder application in five needs a different drawing package from one that refuses one in twenty.

Permitted development in Merton

Larger householder extensions put to London Borough of Merton under the prior-approval route, and lawful-development certificates decided, over eight quarters.

Prior approval not requiredWent ahead without a full application321
Prior approval granted40
Prior approval refused179
Granted where a decision was neededFrom 219 determinations18%
Building upwards, prior approval refused0
Certificates of lawful development decided156

Source: Ministry of Housing, Communities and Local Government (PS1 district planning application statistics). Open Government Licence v3.0 Extracted 2026-08-16.

What removes permitted development in Merton

Live entries on the national planning registers for London Borough of Merton. Article 4 directions withdraw permitted development rights, so a project inside one needs a full application rather than prior approval. Revoked and expired entries are excluded.

Conservation areasPermitted development is already narrower inside one28

Source: MHCLG Planning Data Platform. Open Government Licence v3.0 Extracted 2026-08-16.

House Extension Drawings for Merton homes: the package and the process

Extension drawings are read for their dimensions. The proposed plan needs depth measured from the original rear wall — not from a previous extension — eaves and ridge heights taken from existing ground level, and the distance to each boundary marked. A site plan showing how much garden remains is what an officer reaches for when the amenity question comes up.

We draw the existing building accurately first, because everything else is measured from it. Where the original footprint has already been added to, that history goes on the drawing: it decides which allowances are still available and it is the first thing an officer checks against the council's own records.

The plot decides the extension type long before taste does. A mid-terrace has depth to work with and an alley if it is lucky; a semi has one clear flank; a detached house can go wide. Reading the building form first is what stops a design being drawn that the plot cannot take.

Which extension types do you draw?

Every London extension is shaped by the plot, the neighbours and the borough's design guidance. We draw them all.

Rear extension

A single-storey rear extension is often permitted development within depth limits — ideal for an open-plan kitchen-diner.

Side-return

Fills the alley beside a Victorian terrace, widening the ground floor without losing garden.

Wraparound

Combines a rear and side-return extension for a transformative ground floor, usually needing planning permission.

Double-storey

Adds space above and below, subject to tighter scale and neighbour-impact scrutiny.

Basement

Creates space downward where footprint is limited, with structural and party-wall care.

Do I need planning permission for a house extension in London?

Single-storey rear extensions within permitted development limits (up to 6m for terraced/semi-detached homes under the larger-home scheme, subject to neighbour consultation) may not need a full application. Wraparounds, double-storeys and anything in a conservation area usually do. We assess your plot and recommend the right route before drawing. The current depth, height and eaves limits are set out in full in the guide to planning permission for a rear extension, and where you would rather one practice ran the design, the application and the building-regulations stage together, Architectural Drawings covers that full scope.

How do you maximise the footprint the council will approve?

We know each borough's depth, height and daylight standards, so we design to the edge of what will be approved rather than guessing — and we check the 45-degree neighbour daylight rule and any rear building line before submission. Where a plot is tight we test a permitted-development scheme against a slightly larger householder application and show you the trade-off in space, cost and timescale, so the drawn scheme is the one that actually maximises value rather than just floor area.

Typical London extension drawing packages
ExtensionTypical routePackageFee from
Single-storey rearPermitted development / householderPlanning + building regs£1,100
Side-returnHouseholder planningPlanning + building regs + structural£1,600
WraparoundHouseholder planningFull package + structural£2,200
Double-storeyHouseholder planningFull package + structural£2,400
Sheet from a house extension drawings package prepared for a Merton property, drawn to London Borough of Merton validation standards
A sheet from the house extension drawings package we submit to London Borough of Merton.
FAQ

House Extension Drawings in Merton — FAQs

How far can I extend without planning permission in London?+
Under permitted development, single-storey rear extensions can reach 3m (terraced/semi) or 4m (detached), or up to 6–8m under the prior-approval larger-home scheme — but conservation areas and Article 4 directions can remove these rights. We check your property first.
Do extension drawings include structural calculations?+
Our full package includes structural drawings and calculations coordinated in-house, so your builder can price and build without waiting on an engineer.
How long do extension drawings take?+
Typically about 7 days from survey to a full drawing set delivered to your online portal.
Will my rear extension need a party wall agreement?+
If you build up to or on a shared boundary, excavate near a neighbour's foundations, or cut into a party wall for a steel, the Party Wall etc. Act 1996 usually applies. Our drawings show the works clearly so a party wall surveyor — or your neighbour — can see exactly what is proposed, which keeps that process quick.
Can I extend a house in a conservation area?+
Yes, but conservation areas and Article 4 directions commonly remove permitted development for rear and side extensions, so the work needs a full householder application designed to the council's heritage guidance. We confirm your property's designation before recommending a route.
Do I need planning permission for an extension in Merton?+
The interwar semis of Raynes Park and Morden often keep permitted development rights for rear extensions and lofts, so a full application isn't always needed. Conservation areas such as Wimbledon Village, Wimbledon Common and the John Innes estate at Merton Park restrict this. We check your street's designation first and can confirm permitted development with a Lawful Development Certificate.
What is special about building at the John Innes estate in Merton Park?+
The John Innes estate is a planned Arts-and-Crafts conservation area with a distinctive character the council protects closely — materials, proportions and rooflines are all controlled. Permitted development is often restricted there, so we design to the estate's character and prepare a full, context-led application, which is the reliable route to approval.
What do Merton's HMO Article 4 directions affect?+
In designated wards, an Article 4 direction removes permitted development for change of use to an HMO (C3 to C4), so a conversion to a house in multiple occupation needs a full application there. It doesn't affect a standard family extension, but if you are considering an HMO we confirm whether the direction covers your address and use before advising.
How long does Merton Council take to decide?+
Merton determines most householder applications within the statutory eight-week period once validated; Wimbledon and Merton Park conservation cases can involve additional consultation. We prepare submissions to the council's validation checklist to avoid the drawing queries that cause most delays.
How much do planning drawings cost in Merton?+
We agree a fixed fee before starting, typically around 30% below an architect's fee for the same council-accepted drawings, with free redraws until Merton approves. A suburban Raynes Park extension and a Wimbledon Village or Merton Park application differ in the evidence required, so we quote once we understand your address and project rather than by the hour.
Free Fixed Quote

Get your free Merton planning assessment

Tell us your Merton address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.