Planning Drawings in Wimbledon Village SW19
Fixed-fee, MCIAT-chartered planning drawings for Wimbledon Village (SW19) homeowners — London Borough of Merton validation and local constraints handled from the start.
Wimbledon Village (SW19) is one of Merton's most tightly conservation-controlled neighbourhoods: the historic core and the villa roads sloping toward the Common sit within a run of conservation areas. Whether a property falls inside one of those boundaries is the single biggest factor in how a rear extension, basement or loft is designed and assessed here.
Because so much of the housing is substantial detached and semi-detached villas rather than repeating terraces, each scheme is judged on its own townscape merits — scale, roof form, materials and how it reads from the street all matter more than usual. We map a Wimbledon Village property against the conservation boundaries and any tree constraints first, then prepare drawings to Merton's residential and conservation guidance.
Planning in Wimbledon Village (SW19): what to know before you apply
SW19 has no published householder Article 4 direction in Wimbledon Village, but the overlapping conservation areas mean permitted development cannot be assumed across most of the neighbourhood, and mature protected trees frequently influence where an extension or outbuilding can sit.
Typical Wimbledon Village housing stock
A premium historic village on the hill above the Common — Georgian and early-Victorian houses along the High Street with large detached and semi-detached villas set in generous plots on the roads running down toward Wimbledon Common.
Streets we regularly draw for in Wimbledon Village
Ricards Road · Bernard Gardens · Parkwood Road · Alwyne Road
What SW19 is actually built of
Measured from 435 classified residential buildings in SW19, not from a description of the area.
Wimbledon Village SW19 housing mix
Residential building form across the SW19 postcode district, from 435 classified buildings.
| Attached on more than one side | 53% |
|---|---|
| Attached on one side | 35% |
| Detached | 11% |
| Median building footprint | 66 m² |
| Addresses per buildingAbove about 2 means flats and maisonettes dominate | 1.54 |
| Buildings classified | 435 |
Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-08-17.
Planning Drawings for Wimbledon Village (SW19) homes: the package and the process
A planning set is judged as a set, not as individual sheets. Every existing drawing needs its proposed counterpart at the same scale and orientation so the officer can read the change at a glance, each sheet needs its own number, title, scale bar and north point, and the whole package needs to survive being printed at A3 without a dimension becoming illegible.
We draw to the conventions validation teams expect: plans and elevations at 1:100 or 1:50, a location plan at 1:1250 with the site edged red, a block plan at 1:500, and sections cut where the change in level or roof form actually happens rather than where they are easiest to draw.
The drawing list itself changes with the building. A detached house needs four elevations; a mid-terrace needs two plus a section through the party walls to show what is not visible from outside. Getting that list right at the start is what stops a validation officer asking for a sheet three weeks in.
What is included in a planning drawing set?
A council will only validate an application that contains the right drawings at the right scale. Our standard planning set covers everything a London validation team expects.
- Site location plan (1:1250) and block plan (1:500)
- Existing floor plans, elevations and sections
- Proposed floor plans, elevations and sections
- Roof plans where relevant, with heights and materials annotated
- A design and access or heritage statement where the borough requires one
How are planning drawings different from building regulations drawings?
Planning drawings show what the building will look like and how it sits in its context. Building regulations drawings show how it will be built safely — structure, insulation, fire escape and drainage. Most projects need both; our Complete package covers the two together with structural calculations coordinated in-house.
How quickly can you produce planning drawings in London?
After a laser survey, a standard householder set is typically ready within 7 days. We review every drawing against your borough's validation checklist before it reaches a planner's desk, which is why our first-time approval rate sits around 96%.
| Drawing | Typical scale | What it shows |
|---|---|---|
| Site location plan | 1:1250 | The property in its street context, site edged red |
| Block plan | 1:500 | The building's footprint and position in the plot |
| Floor plans (existing & proposed) | 1:100 / 1:50 | Room layout, walls, openings and the proposed changes |
| Elevations (existing & proposed) | 1:100 / 1:50 | Each face of the building and how it changes |
| Sections | 1:100 / 1:50 | A cut through showing heights, levels and roof form |
Planning Drawings in Wimbledon Village SW19 — FAQs
What scale should London planning drawings be?+
Do I need an architect to produce planning drawings?+
How many revisions are included in the fee?+
Can you draw from my existing plans?+
Do planning drawings guarantee approval?+
Do I need planning permission for an extension in Merton?+
What is special about building at the John Innes estate in Merton Park?+
What do Merton's HMO Article 4 directions affect?+
How long does Merton Council take to decide?+
How much do planning drawings cost in Merton?+
Get your free Wimbledon Village planning assessment
Tell us your Wimbledon Village (SW19) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.