Planning Drawings in South Wimbledon SW19
Fixed-fee, MCIAT-chartered planning drawings for South Wimbledon (SW19) homeowners — London Borough of Merton validation and local constraints handled from the start.
South Wimbledon (SW19) is one of Merton's densest Victorian and Edwardian terraced neighbourhoods, and side-return, rear and loft projects are the everyday work here. Because the houses repeat the same footprint street after street, Merton's design expectations for extensions are well understood — meeting them first time is straightforward when the drawings follow the borough's residential extension guidance.
The South Park Gardens and Pelham Road conservation areas sit within otherwise ordinary terraced streets, so whether a house falls inside one of those boundaries changes how dormers, front elevations and materials are assessed. We check a South Wimbledon property against the boundary before recommending a permitted-development or full-application route.
Planning in South Wimbledon (SW19): what to know before you apply
SW19 carries no published householder Article 4 direction in South Wimbledon, so many terraces retain permitted development rights for rear and loft work — but the South Park Gardens and Pelham Road conservation areas are the exceptions, and shallow rear gardens constrain extension depth on several streets.
Typical South Wimbledon housing stock
Tightly packed Victorian and Edwardian terraces filling the grid of streets between Wimbledon and Merton, most with modest rear gardens — the classic backdrop for side-return, rear and loft projects.
Streets we regularly draw for in South Wimbledon
Gladstone Road · Graham Road · Herbert Road · Russell Road
What SW19 is actually built of
Measured from 435 classified residential buildings in SW19, not from a description of the area.
South Wimbledon SW19 housing mix
Residential building form across the SW19 postcode district, from 435 classified buildings.
| Attached on more than one side | 53% |
|---|---|
| Attached on one side | 35% |
| Detached | 11% |
| Median building footprint | 66 m² |
| Addresses per buildingAbove about 2 means flats and maisonettes dominate | 1.54 |
| Buildings classified | 435 |
Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-08-17.
Planning Drawings for South Wimbledon (SW19) homes: the package and the process
A planning set is judged as a set, not as individual sheets. Every existing drawing needs its proposed counterpart at the same scale and orientation so the officer can read the change at a glance, each sheet needs its own number, title, scale bar and north point, and the whole package needs to survive being printed at A3 without a dimension becoming illegible.
We draw to the conventions validation teams expect: plans and elevations at 1:100 or 1:50, a location plan at 1:1250 with the site edged red, a block plan at 1:500, and sections cut where the change in level or roof form actually happens rather than where they are easiest to draw.
The drawing list itself changes with the building. A detached house needs four elevations; a mid-terrace needs two plus a section through the party walls to show what is not visible from outside. Getting that list right at the start is what stops a validation officer asking for a sheet three weeks in.
What is included in a planning drawing set?
A council will only validate an application that contains the right drawings at the right scale. Our standard planning set covers everything a London validation team expects.
- Site location plan (1:1250) and block plan (1:500)
- Existing floor plans, elevations and sections
- Proposed floor plans, elevations and sections
- Roof plans where relevant, with heights and materials annotated
- A design and access or heritage statement where the borough requires one
How are planning drawings different from building regulations drawings?
Planning drawings show what the building will look like and how it sits in its context. Building regulations drawings show how it will be built safely — structure, insulation, fire escape and drainage. Most projects need both; our Complete package covers the two together with structural calculations coordinated in-house.
How quickly can you produce planning drawings in London?
After a laser survey, a standard householder set is typically ready within 7 days. We review every drawing against your borough's validation checklist before it reaches a planner's desk, which is why our first-time approval rate sits around 96%.
| Drawing | Typical scale | What it shows |
|---|---|---|
| Site location plan | 1:1250 | The property in its street context, site edged red |
| Block plan | 1:500 | The building's footprint and position in the plot |
| Floor plans (existing & proposed) | 1:100 / 1:50 | Room layout, walls, openings and the proposed changes |
| Elevations (existing & proposed) | 1:100 / 1:50 | Each face of the building and how it changes |
| Sections | 1:100 / 1:50 | A cut through showing heights, levels and roof form |
Planning Drawings in South Wimbledon SW19 — FAQs
What scale should London planning drawings be?+
Do I need an architect to produce planning drawings?+
How many revisions are included in the fee?+
Can you draw from my existing plans?+
Do planning drawings guarantee approval?+
Do I need planning permission for an extension in Merton?+
What is special about building at the John Innes estate in Merton Park?+
What do Merton's HMO Article 4 directions affect?+
How long does Merton Council take to decide?+
How much do planning drawings cost in Merton?+
Get your free South Wimbledon planning assessment
Tell us your South Wimbledon (SW19) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.