Wraparound Extension Drawings in Southwark
Fixed-fee, MCIAT-chartered wraparound extension drawings for Southwark homeowners — London Borough of Southwark validation and local constraints handled from the start.
Southwark runs from the riverside warehouse and wharf conversions of Bankside and Bermondsey down through the Georgian and Victorian terraces of Camberwell, Peckham and Walworth to the leafy Georgian and Victorian streets of Dulwich, with post-war estate housing woven throughout. Terraced rear and side-return extensions and loft conversions are the borough's everyday projects, but each area behaves differently in planning terms, so the right route depends heavily on where your address sits.
Dulwich carries an extra layer that is distinctive to Southwark: the Dulwich Estate scheme of management, whose consent is often needed alongside the council's, similar in effect to a covenant and satisfied separately from planning permission. Elsewhere, conservation-area control shapes external design across a spread of designations — Dulwich Village, Bankside, Bermondsey Street, Camberwell Grove, Nunhead Cemetery and Peckham's Holly Grove among them — while the borough also operates Article 4 directions covering office-to-residential change of use in designated areas and HMO conversions in parts of the borough. Toward the Thames, riverside townscape and taller-building context add their own design scrutiny to conversions in Bankside and Bermondsey.
We prepare Southwark planning drawings tuned to the specific area — terraced extensions and lofts in Camberwell, Peckham and Nunhead, carefully evidenced applications within the conservation areas, and Dulwich schemes designed to the Estate's requirements as well as the council's — flagging whether the Estate scheme or an Article 4 direction applies before we draw. Southwark determines most householder applications within the statutory eight-week period once validated, so we work validation-first to head off drawing queries. The fee is fixed and agreed up front, drawings typically follow within about seven days, and we offer free redraws until the council approves — the same council-accepted drawings as an architect, usually at around 30% less.
Planning in Southwark: what to know before you apply
A distinctive Southwark quirk is the Dulwich Estate scheme of management: many properties on the Estate need Dulwich Estate consent in parallel with planning permission, similar in effect to a covenant. Elsewhere, conservation-area control across Camberwell, Bermondsey and Bankside shapes external design. We flag whether the Estate scheme applies before drawing.
Typical Southwark housing stock
Georgian and Victorian terraces across Camberwell, Peckham and Dulwich, warehouse and wharf conversions along the Bermondsey and Bankside riverside, and post-war estate housing.
Areas we regularly draw for in Southwark
Camberwell · Peckham · Dulwich · Bermondsey · Rotherhithe · Nunhead · Walworth · Bankside
What the numbers say about Southwark planning decisions
These are London Borough of Southwark’s own reported figures, published by government rather than estimated by us. They are what we design against — a borough that refuses one householder application in five needs a different drawing package from one that refuses one in twenty.
Permitted development in Southwark
Larger householder extensions put to London Borough of Southwark under the prior-approval route, and lawful-development certificates decided, over eight quarters.
| Prior approval not requiredWent ahead without a full application | 19 |
|---|---|
| Prior approval granted | 9 |
| Prior approval refused | 4 |
| Building upwards, prior approval refused | 0 |
| Certificates of lawful development decided | 420 |
Source: Ministry of Housing, Communities and Local Government (PS1 district planning application statistics). Open Government Licence v3.0 Extracted 2026-08-16.
What removes permitted development in Southwark
Live entries on the national planning registers for London Borough of Southwark. Article 4 directions withdraw permitted development rights, so a project inside one needs a full application rather than prior approval. Revoked and expired entries are excluded.
| Article 4 directions in force | 480 |
|---|---|
| Areas they coverOne direction can cover many separate areas | 480 |
| Conservation areasPermitted development is already narrower inside one | 56 |
Source: MHCLG Planning Data Platform. Open Government Licence v3.0 Extracted 2026-08-16.
Wraparound Extension Drawings for Southwark homes: the package and the process
A wraparound is assessed as one addition, so the drawings have to present it as one: a single proposed footprint with the rear depth and the side width both dimensioned, the roof drawn as it turns the corner, and the remaining garden shown on the site plan.
The corner is where the technical work sits. Two roof planes and two structural spans meet at the return, drainage has to get round it, and the internal opening is usually wide enough to need a designed frame rather than a single beam. We resolve that junction on the drawings before it becomes a question on site.
A wraparound needs both a rear garden and a side alley, which in practice means a terrace or end-of-terrace with an outrigger. Where only one of the two exists, the honest answer is a rear extension or a side return — the combined footprint has nowhere to turn the corner.
What makes a wraparound extension different from a rear or side return alone?
A rear extension adds depth at the back of the house; a side return adds width down the alley; a wraparound does both at once, so the new floor area turns the corner of the original building rather than sitting against just one wall. The result is typically the largest open-plan space a single-storey extension can deliver, but it also means more of the original external wall is removed and more of the roof is new, which raises the structural and drainage stakes compared with either extension on its own. Homeowners who start out planning a rear extension or a side return alone often move to a wraparound once they see how little extra it costs to combine the two, since much of the groundwork, roof structure and glazing is shared between them rather than duplicated.
Do wraparound extensions need full planning permission in London?
Almost always, yes. Permitted development allowances are calculated on combined additions to the original house, and a wraparound's depth plus width together generally exceed the volume and footprint limits that apply to a rear extension or side extension considered separately. A Lawful Development Certificate route is rarely viable for a genuine wraparound.
Conservation area status and Article 4 directions, common across the terraced streets where wraparound extensions are most popular, remove permitted development rights further still, so we design every wraparound on the assumption it will go through full householder planning.
Structural design for a wraparound extension
Because the new space turns a corner, the structural frame has to work as one continuous system rather than two independent extensions bolted together.
- A continuous steel or ring-beam frame carrying the roof around the internal corner where the rear and side elements meet
- A glazed roof lantern or rooflight strip often placed at the corner junction, where natural light reaches deepest into the combined plan
- Foundations for both the rear and side elements designed together, so they tie into the existing house consistently
- Bi-fold or sliding doors across the rear elevation, coordinated with the side glazing so the two elements read as one space
| Route | What it covers | Typical fee |
|---|---|---|
| Full planning permission | Required for almost all wraparound extensions given the combined footprint | Full Planning pack ~£1,600–£2,400 |
| Planning + Building Regulations (structural) | Combined pack including structural calculations for the L-shaped frame and drainage diversion | Planning + Building Regs pack ~£2,200–£3,850 |
| Rear extension alone (comparison) | Smaller single-storey addition, may qualify for permitted development | see Rear Extension Drawings, from £1,100 |
| Side return alone (comparison) | Widens the kitchen only, keeps garden depth unchanged | see Side Return Extension Drawings, from £1,400 |
Wraparound Extension Drawings across Southwark
Wraparound Extension Drawings in Southwark — FAQs
How much does a wraparound extension cost to design in London?+
Does a wraparound extension always need planning permission?+
Do I need an architect for a wraparound extension?+
Will I need a Party Wall Agreement for a wraparound extension?+
How long does it take to get wraparound extension drawings?+
Do I need planning permission for an extension in Southwark?+
What is the Dulwich Estate scheme of management?+
Can you handle a warehouse or riverside conversion in Bermondsey or Bankside?+
How long does Southwark Council take to decide?+
How much do planning drawings cost in Southwark?+
Get your free Southwark planning assessment
Tell us your Southwark address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.