MCIAT chartered drawings · Fixed fees across all 33 London boroughs
[email protected]020 7864 7245WhatsApp

Free 2026 London Planning Report — Rear Extension Drawings in Totteridge N20

New house design drawings for a large plot in Totteridge N20, London Borough of Barnet
Totteridge · N20 · Barnet

Rear Extension Drawings in Totteridge N20

Fixed-fee, MCIAT-chartered rear extension drawings for Totteridge (N20) homeowners — London Borough of Barnet validation and local constraints handled from the start.

Free Totteridge planning assessment

Tell us your Totteridge (N20) address and project. A fixed quote and free planning appraisal land within one working day.

No obligation · No spam · Reply within 1 working day

Totteridge (N20) runs along a green ridge of large detached houses, former farmhouses and villas on deep plots with paddocks and mature trees, and that semi-rural grain shapes the generous but carefully judged extensions we draw here.

Because the conservation area has carried Article 4 directions since 1970 that remove PD rights for extensions, roofs, porches and outbuildings, we check the boundary and any Green Belt overlap before advising whether a scheme needs a full application.

New house design drawings for a large plot in Totteridge N20, London Borough of Barnet
Isometric illustration of a Totteridge N20 home rear extension drawings design
Proposed floor plan
Totteridge N20

Planning in Totteridge (N20): what to know before you apply

Totteridge extensions almost always run as full householder applications to Barnet, since the long-standing Article 4 directions remove the permitted-development route across the conservation area. We prepare a heritage-and-landscape-aware set, checking tree constraints and any Green Belt overlap before submission.

Typical Totteridge housing stock

Large detached houses, former farmhouses and villas set along the ridge of Totteridge Lane and Totteridge Village, on deep plots with paddocks, mature trees and green verges giving the area its semi-rural character.

Streets we regularly draw for in Totteridge

Totteridge Lane · Totteridge Village · Grange Avenue · Barnet Lane

What N20 is actually built of

Measured from 391 classified residential buildings in N20, not from a description of the area.

Totteridge N20 housing mix

Residential building form across the N20 postcode district, from 391 classified buildings.

Attached on more than one side23%
Attached on one side54%
Detached24%
Median building footprint93 m²
Addresses per buildingAbove about 2 means flats and maisonettes dominate1.42
Buildings classified391

Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-08-17.

Rear Extension Drawings for Totteridge (N20) homes: the package and the process

Depth is the number the application turns on, and it has to be measured from the original rear wall of the house rather than from whatever is there now. The drawings carry that dimension, the eaves and ridge heights, the position of any rooflight, and the boundary distances on both sides.

Where the scheme goes beyond the standard allowance and relies on the larger home extension route, the drawings serve a second purpose: they are what the council sends to the neighbours during the consultation. A clear, dimensioned proposed elevation answers the objection about overshadowing before it is made.

Depth is limited by the plot as much as by the rules. A long garden behind a terrace can take the full allowance, while a short one runs out before the rules do — and on a semi or detached house the same depth reads very differently from the boundary.

Do I need planning permission for a rear extension in London?

Many single-storey rear extensions qualify as permitted development, meaning no planning application is needed, provided depth, height and materials stay within set limits. That changes if your property sits in a conservation area or is subject to an Article 4 direction, both of which can remove permitted development rights across a street or borough — in that case a full householder planning application is required regardless of size.

Even where an extension qualifies, most homeowners obtain a Lawful Development Certificate to confirm that status in writing before building — useful for mortgage lenders, buyers and Building Control. We check your property against your borough's constraints before recommending a route.

How deep can a single-storey rear extension go?

Depth is the main constraint on a rear extension, and it depends on your house type and whether you use standard permitted development or the larger home extension scheme.

Permitted development

Standard permitted development allows a single-storey rear extension up to 3 metres deep for terraced and semi-detached houses, or 4 metres for detached houses, generally with eaves height limited to match or stay close to the existing house.

Larger home extension scheme

The prior-approval scheme extends this to 6 metres for terraced and semi-detached houses and 8 metres for detached houses. Your council writes to affected neighbours; if none object within the notification period, approval follows without a full planning application. If an objection is raised, the council assesses the impact on neighbouring light and outlook itself, rather than automatically refusing, so a well-considered design still has a good chance of approval.

Designing the kitchen-diner: rooflights, bi-folds and daylight

Most rear extensions exist to create one open-plan kitchen, dining and living space, so the drawing work focuses on getting light and flow right within the depth you are allowed.

  • Structural opening sized for bi-fold or sliding doors across most of the rear elevation
  • Rooflights or a roof lantern positioned to light the centre of the room, away from the shadow line of the main house
  • Open-plan layout tested against the 45-degree rule, which protects daylight to your neighbours' windows and can limit how close a flank wall or roof comes to the boundary
  • Floor build-up and threshold detail coordinated so the new floor meets the existing one without a step
Rear extension routes at a glance
RouteWhen it appliesTypical fee
Permitted development (Lawful Development Certificate)Depth within 3m (terraced/semi) or 4m (detached), height and materials within PD limitsPD/LDC pack ~£950–£1,450
Larger home extension (prior approval)Depth up to 6m (terraced/semi) or 8m (detached), with neighbour notificationfrom £1,100
Full householder planning permissionExtension exceeds PD/larger-home limits, or the property is in a conservation area with an Article 4 directionFull Planning pack ~£1,600–£2,400
Planning + Building Regulations (structural)Combined planning and construction-ready pack with structural calculations for the opening and roofPlanning + Building Regs pack ~£2,200–£3,850
Sheet from a rear extension drawings package drawn for a Totteridge property in N20, showing the existing and proposed arrangement at scale
A sheet from the rear extension drawings package we submit to London Borough of Barnet for Totteridge (N20) properties.

Also in Totteridge N20

Planning PermissionPlanning DrawingsArchitectural DrawingsBuilding Regulations DrawingsLoft Conversion DrawingsRear Extension Drawings across BarnetRear Extension Drawings across London
FAQ

Rear Extension Drawings in Totteridge N20 — FAQs

How much does a rear extension cost to design in London?+
Rear extension drawings start from £1,100, with the final fee set by the route your extension takes — permitted development, prior approval or full planning — and whether you need building regulations and structural calculations bundled in. The fee is fixed and agreed upfront.
Do I need an architect for a rear extension?+
No. DrawingsDirect is an MCIAT-chartered architectural technologist practice, producing the same council-accepted drawings as an architect for a fixed fee typically around 30% lower.
How long does it take to get rear extension drawings?+
Drawings are typically ready around 7 days from survey. Once submitted, councils have a statutory 8-week period to determine a standard householder planning application.
What is the 45-degree rule?+
It is a daylight test many London councils apply to check that a rear extension does not block too much light to a neighbour's nearest window, measured as a line drawn at 45 degrees from that window. We check it before submission, not after a refusal.
Will I need a Party Wall Agreement for a rear extension?+
Only if your foundations or new walls sit on or near the boundary with a neighbouring property. A straightforward rear extension set within your own plot often does not trigger the Party Wall etc. Act 1996, unlike a Side Return or Wraparound extension, which usually does.
Do I need planning permission for a loft or extension in Barnet?+
Across Finchley, Edgware and Hendon, Barnet's 1930s semis usually keep permitted development rights for rear extensions and hip-to-gable or dormer lofts, so a full application isn't always needed. The major exception is Hampstead Garden Suburb, where an Article 4 direction removes almost all permitted development rights. We check your address first and confirm permitted development with a Lawful Development Certificate where it applies.
What is different about building in Hampstead Garden Suburb?+
The Suburb has one of the most far-reaching Article 4 directions in London: almost all external alterations need planning permission, and the Hampstead Garden Suburb Trust must also consent to changes in parallel with the council. We handle both tracks — a carefully evidenced planning application to Barnet and the Trust's design requirements — since approval there depends on respecting the Arts-and-Crafts character precisely.
Is a hip-to-gable loft conversion allowed on my Barnet semi?+
Usually, yes. The borough's abundant interwar semis are well suited to hip-to-gable and dormer conversions, which frequently qualify as permitted development on semi-detached homes within the volume limits. Outside conservation areas and the Suburb, this is often the quickest route. We confirm eligibility, then produce the planning and building-regulations drawings.
How long does Barnet take to decide an application?+
Barnet determines most householder applications within the statutory eight-week period once validated; Suburb and conservation cases can involve additional consultation. We prepare Barnet submissions to the validation checklist, with the elevations and materials detail the council expects, to avoid the drawing queries that are the usual cause of delay.
How much do Barnet planning drawings cost?+
We agree a fixed fee before we start, typically around 30% below an architect's fee for the same council-accepted drawings, with free redraws until Barnet approves. A straightforward Finchley loft and a Hampstead Garden Suburb application differ in the evidence required, so we quote once we have seen the project and know which route applies.
Free Fixed Quote

Get your free Totteridge planning assessment

Tell us your Totteridge (N20) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.