Aerial view of London suburban rooftops and rear gardens across a borough like Barnet

Barnet · London

Rear Extension Drawings in Barnet

Fixed-fee, MCIAT-chartered rear extension drawings for Barnet homeowners — London Borough of Barnet validation and local constraints handled from the start.

Barnet's housing is dominated by interwar semi-detached suburbia across Finchley, Hendon and Edgware — homes ideal for hip-to-gable and dormer loft conversions and rear extensions, which frequently qualify as permitted development on semi-detached houses within the volume limits. But the borough also contains Hampstead Garden Suburb, one of the most tightly controlled residential areas in the country, so the correct route depends entirely on which part of Barnet you are in rather than on the house type alone.

Within the Suburb, an Article 4 direction removes almost all permitted development rights — one of the most far-reaching in London — and the Hampstead Garden Suburb Trust must also consent to external changes in parallel with the London Borough of Barnet. The borough's other conservation areas, Mill Hill, Monken Hadley, Totteridge and Finchley Church End, apply their own controls on 1930s semi character and front elevations, and the greens at Totteridge and Monken Hadley add further sensitivity. Elsewhere, Barnet's interwar semis usually retain permitted development rights for rear extensions and lofts.

We tailor Barnet applications to the specific area: straightforward permitted-development lofts and extensions across Finchley and Edgware, confirmed with a Lawful Development Certificate where they qualify, and carefully evidenced full applications within the Suburb and conservation areas. In the Suburb we handle both tracks — a design-led planning application to Barnet and the Trust's requirements — since approval there depends on respecting the Arts-and-Crafts character precisely. The fee is fixed and agreed up front, typically around 30% below an architect's charge for the same council-accepted drawings, with free redraws until Barnet approves. Drawing to the validation checklist, and turning drawings around in roughly seven days, keeps most householder applications inside the statutory eight-week determination, with the elevations and materials detail the council expects.

Proposed floor plan

Barnet

Planning in Barnet: what to know before you apply

The Hampstead Garden Suburb Article 4 direction is among the most far-reaching in London, controlling almost all external alterations and requiring Hampstead Garden Suburb Trust consent in parallel with planning. Elsewhere, Barnet's 1930s semis usually retain permitted development rights for rear extensions and lofts.

Typical Barnet housing stock

1930s semi-detached suburbia across Finchley, Hendon and Edgware, with the nationally significant Arts-and-Crafts housing of Hampstead Garden Suburb.

Areas we regularly draw for in Barnet

Finchley · Edgware · Hendon · Golders Green · Mill Hill · Chipping Barnet · Whetstone

What the numbers say about Barnet planning decisions

These are London Borough of Barnet’s own reported figures, published by government rather than estimated by us. They are what we design against — a borough that refuses one householder application in five needs a different drawing package from one that refuses one in twenty.

Permitted development in Barnet

Larger householder extensions put to London Borough of Barnet under the prior-approval route, and lawful-development certificates decided, over eight quarters.

Prior approval not requiredWent ahead without a full application	364
Prior approval granted	30
Prior approval refused	210
Granted where a decision was neededFrom 240 determinations	12%
Building upwards, prior approval refused	0
Certificates of lawful development decided	1,664

Source: Ministry of Housing, Communities and Local Government (PS1 district planning application statistics). Open Government Licence v3.0 Extracted 2026-08-16.

What removes permitted development in Barnet

Live entries on the national planning registers for London Borough of Barnet. Article 4 directions withdraw permitted development rights, so a project inside one needs a full application rather than prior approval. Revoked and expired entries are excluded.

Article 4 directions in force	15
Areas they coverOne direction can cover many separate areas	48
Conservation areasPermitted development is already narrower inside one	16

Source: MHCLG Planning Data Platform. Open Government Licence v3.0 Extracted 2026-08-16.

Rear Extension Drawings for Barnet homes: the package and the process

Depth is the number the application turns on, and it has to be measured from the original rear wall of the house rather than from whatever is there now. The drawings carry that dimension, the eaves and ridge heights, the position of any rooflight, and the boundary distances on both sides.

Where the scheme goes beyond the standard allowance and relies on the larger home extension route, the drawings serve a second purpose: they are what the council sends to the neighbours during the consultation. A clear, dimensioned proposed elevation answers the objection about overshadowing before it is made.

Depth is limited by the plot as much as by the rules. A long garden behind a terrace can take the full allowance, while a short one runs out before the rules do — and on a semi or detached house the same depth reads very differently from the boundary.

Do I need planning permission for a rear extension in London?

Many single-storey rear extensions qualify as permitted development, meaning no planning application is needed, provided depth, height and materials stay within set limits. That changes if your property sits in a conservation area or is subject to an Article 4 direction, both of which can remove permitted development rights across a street or borough — in that case a full householder planning application is required regardless of size.

Even where an extension qualifies, most homeowners obtain a Lawful Development Certificate to confirm that status in writing before building — useful for mortgage lenders, buyers and Building Control. We check your property against your borough's constraints before recommending a route.

How deep can a single-storey rear extension go?

Depth is the main constraint on a rear extension, and it depends on your house type and whether you use standard permitted development or the larger home extension scheme.

Permitted development

Standard permitted development allows a single-storey rear extension up to 3 metres deep for terraced and semi-detached houses, or 4 metres for detached houses, generally with eaves height limited to match or stay close to the existing house.

Larger home extension scheme

The prior-approval scheme extends this to 6 metres for terraced and semi-detached houses and 8 metres for detached houses. Your council writes to affected neighbours; if none object within the notification period, approval follows without a full planning application. If an objection is raised, the council assesses the impact on neighbouring light and outlook itself, rather than automatically refusing, so a well-considered design still has a good chance of approval.

Designing the kitchen-diner: rooflights, bi-folds and daylight

Most rear extensions exist to create one open-plan kitchen, dining and living space, so the drawing work focuses on getting light and flow right within the depth you are allowed.

Structural opening sized for bi-fold or sliding doors across most of the rear elevation
Rooflights or a roof lantern positioned to light the centre of the room, away from the shadow line of the main house
Open-plan layout tested against the 45-degree rule, which protects daylight to your neighbours' windows and can limit how close a flank wall or roof comes to the boundary
Floor build-up and threshold detail coordinated so the new floor meets the existing one without a step

Rear extension routes at a glance
Route	When it applies	Typical fee
Permitted development (Lawful Development Certificate)	Depth within 3m (terraced/semi) or 4m (detached), height and materials within PD limits	PD/LDC pack ~£950–£1,450
Larger home extension (prior approval)	Depth up to 6m (terraced/semi) or 8m (detached), with neighbour notification	from £1,100
Full householder planning permission	Extension exceeds PD/larger-home limits, or the property is in a conservation area with an Article 4 direction	Full Planning pack ~£1,600–£2,400
Planning + Building Regulations (structural)	Combined planning and construction-ready pack with structural calculations for the opening and roof	Planning + Building Regs pack ~£2,200–£3,850

Sheet from a rear extension drawings package prepared for a Barnet property, drawn to London Borough of Barnet validation standards — A sheet from the rear extension drawings package we submit to London Borough of Barnet.

Local Areas

Rear Extension Drawings across Barnet

Also in Barnet

Planning Permission Planning Drawings Architectural Drawings Building Regulations Drawings Loft Conversion Drawings Rear Extension Drawings across London

FAQ

Rear Extension Drawings in Barnet — FAQs

How much does a rear extension cost to design in London?+

Rear extension drawings start from £1,100, with the final fee set by the route your extension takes — permitted development, prior approval or full planning — and whether you need building regulations and structural calculations bundled in. The fee is fixed and agreed upfront.

Do I need an architect for a rear extension?+

No. DrawingsDirect is an MCIAT-chartered architectural technologist practice, producing the same council-accepted drawings as an architect for a fixed fee typically around 30% lower.

How long does it take to get rear extension drawings?+

Drawings are typically ready around 7 days from survey. Once submitted, councils have a statutory 8-week period to determine a standard householder planning application.

What is the 45-degree rule?+

It is a daylight test many London councils apply to check that a rear extension does not block too much light to a neighbour's nearest window, measured as a line drawn at 45 degrees from that window. We check it before submission, not after a refusal.

Will I need a Party Wall Agreement for a rear extension?+

Only if your foundations or new walls sit on or near the boundary with a neighbouring property. A straightforward rear extension set within your own plot often does not trigger the Party Wall etc. Act 1996, unlike a Side Return or Wraparound extension, which usually does.

Do I need planning permission for a loft or extension in Barnet?+

Across Finchley, Edgware and Hendon, Barnet's 1930s semis usually keep permitted development rights for rear extensions and hip-to-gable or dormer lofts, so a full application isn't always needed. The major exception is Hampstead Garden Suburb, where an Article 4 direction removes almost all permitted development rights. We check your address first and confirm permitted development with a Lawful Development Certificate where it applies.

What is different about building in Hampstead Garden Suburb?+

The Suburb has one of the most far-reaching Article 4 directions in London: almost all external alterations need planning permission, and the Hampstead Garden Suburb Trust must also consent to changes in parallel with the council. We handle both tracks — a carefully evidenced planning application to Barnet and the Trust's design requirements — since approval there depends on respecting the Arts-and-Crafts character precisely.

Is a hip-to-gable loft conversion allowed on my Barnet semi?+

Usually, yes. The borough's abundant interwar semis are well suited to hip-to-gable and dormer conversions, which frequently qualify as permitted development on semi-detached homes within the volume limits. Outside conservation areas and the Suburb, this is often the quickest route. We confirm eligibility, then produce the planning and building-regulations drawings.

How long does Barnet take to decide an application?+

Barnet determines most householder applications within the statutory eight-week period once validated; Suburb and conservation cases can involve additional consultation. We prepare Barnet submissions to the validation checklist, with the elevations and materials detail the council expects, to avoid the drawing queries that are the usual cause of delay.

How much do Barnet planning drawings cost?+

We agree a fixed fee before we start, typically around 30% below an architect's fee for the same council-accepted drawings, with free redraws until Barnet approves. A straightforward Finchley loft and a Hampstead Garden Suburb application differ in the evidence required, so we quote once we have seen the project and know which route applies.

Free Fixed Quote

Get your free Barnet planning assessment

Tell us your Barnet address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.