Rear Extension Drawings in Kingston
Fixed-fee, MCIAT-chartered rear extension drawings for Kingston homeowners — Royal Borough of Kingston upon Thames validation and local constraints handled from the start.
Kingston upon Thames pairs the elegant Victorian and Edwardian villas and terraces of Surbiton and Norbiton with the interwar semi-detached suburbia that runs through New Malden, Chessington and Tolworth, and the substantial detached houses set across the Coombe hill and the riverside plots near the Thames. Rear extensions and loft conversions are the Royal Borough's most requested projects, and each of these house types calls for a slightly different approach on the drawing board.
Two local factors shape design here more than most. Riverside plots near Kingston and the river sit within the Thames flood zone, where the council expects flood-risk and finished-floor-level considerations to be addressed, and conservation-area control across Surbiton, Coombe, Norbiton, Old Malden and the Kingston town centre governs materials and external design. Kingston also applies Article 4 directions removing permitted development for HMO conversions in parts of the borough, so a change of use to a house in multiple occupation needs checking against your address. The interwar semis of New Malden and Chessington, by contrast, often retain fuller permitted development rights for rear extensions and lofts, and Coombe's larger detached plots can carry more substantial schemes within design policy.
We prepare Kingston planning drawings tuned to your specific house type — a Surbiton villa, a New Malden semi or a Coombe detached home — confirming permitted development eligibility first and evidencing flood-risk or conservation considerations where a riverside or designated site is involved. Because the Royal Borough determines most householder applications within the statutory eight-week period once validated, we work validation-first to avoid the drawing queries that cause most delays. The fee is fixed and agreed up front, drawings typically follow within about seven days, and we offer free redraws until the council approves — the same council-accepted drawings an architect would produce, usually at around 30% less.
Planning in Kingston: what to know before you apply
Kingston applies Article 4 directions to HMO conversions in parts of the borough and controls design within conservation areas such as Surbiton, Coombe and the town centre. Thames flood-zone considerations apply on riverside plots. The interwar semis of New Malden and Chessington often retain permitted development rights for rear extensions and lofts — we confirm before drawing.
Typical Kingston housing stock
Victorian and Edwardian villas and terraces around Surbiton and Norbiton, interwar semi-detached suburbia through New Malden, Chessington and Tolworth, and larger detached houses on the Coombe hill and riverside plots near the Thames.
Areas we regularly draw for in Kingston
Kingston · Surbiton · New Malden · Chessington · Norbiton · Coombe · Tolworth · Old Malden
What the numbers say about Kingston planning decisions
These are Royal Borough of Kingston upon Thames’s own reported figures, published by government rather than estimated by us. They are what we design against — a borough that refuses one householder application in five needs a different drawing package from one that refuses one in twenty.
Permitted development in Kingston
Larger householder extensions put to Royal Borough of Kingston upon Thames under the prior-approval route, and lawful-development certificates decided, over eight quarters.
| Prior approval not requiredWent ahead without a full application | 94 |
|---|---|
| Prior approval granted | 9 |
| Prior approval refused | 102 |
| Granted where a decision was neededFrom 111 determinations | 8% |
| Building upwards, prior approval refused | 0 |
| Certificates of lawful development decided | 584 |
Source: Ministry of Housing, Communities and Local Government (PS1 district planning application statistics). Open Government Licence v3.0 Extracted 2026-08-16.
What removes permitted development in Kingston
Live entries on the national planning registers for Royal Borough of Kingston upon Thames. Article 4 directions withdraw permitted development rights, so a project inside one needs a full application rather than prior approval. Revoked and expired entries are excluded.
| Article 4 directions in force | 3 |
|---|---|
| Areas they coverOne direction can cover many separate areas | 114 |
| Conservation areasPermitted development is already narrower inside one | 28 |
Source: MHCLG Planning Data Platform. Open Government Licence v3.0 Extracted 2026-08-16.
Rear Extension Drawings for Kingston homes: the package and the process
Depth is the number the application turns on, and it has to be measured from the original rear wall of the house rather than from whatever is there now. The drawings carry that dimension, the eaves and ridge heights, the position of any rooflight, and the boundary distances on both sides.
Where the scheme goes beyond the standard allowance and relies on the larger home extension route, the drawings serve a second purpose: they are what the council sends to the neighbours during the consultation. A clear, dimensioned proposed elevation answers the objection about overshadowing before it is made.
Depth is limited by the plot as much as by the rules. A long garden behind a terrace can take the full allowance, while a short one runs out before the rules do — and on a semi or detached house the same depth reads very differently from the boundary.
Do I need planning permission for a rear extension in London?
Many single-storey rear extensions qualify as permitted development, meaning no planning application is needed, provided depth, height and materials stay within set limits. That changes if your property sits in a conservation area or is subject to an Article 4 direction, both of which can remove permitted development rights across a street or borough — in that case a full householder planning application is required regardless of size.
Even where an extension qualifies, most homeowners obtain a Lawful Development Certificate to confirm that status in writing before building — useful for mortgage lenders, buyers and Building Control. We check your property against your borough's constraints before recommending a route.
How deep can a single-storey rear extension go?
Depth is the main constraint on a rear extension, and it depends on your house type and whether you use standard permitted development or the larger home extension scheme.
Permitted development
Standard permitted development allows a single-storey rear extension up to 3 metres deep for terraced and semi-detached houses, or 4 metres for detached houses, generally with eaves height limited to match or stay close to the existing house.
Larger home extension scheme
The prior-approval scheme extends this to 6 metres for terraced and semi-detached houses and 8 metres for detached houses. Your council writes to affected neighbours; if none object within the notification period, approval follows without a full planning application. If an objection is raised, the council assesses the impact on neighbouring light and outlook itself, rather than automatically refusing, so a well-considered design still has a good chance of approval.
Designing the kitchen-diner: rooflights, bi-folds and daylight
Most rear extensions exist to create one open-plan kitchen, dining and living space, so the drawing work focuses on getting light and flow right within the depth you are allowed.
- Structural opening sized for bi-fold or sliding doors across most of the rear elevation
- Rooflights or a roof lantern positioned to light the centre of the room, away from the shadow line of the main house
- Open-plan layout tested against the 45-degree rule, which protects daylight to your neighbours' windows and can limit how close a flank wall or roof comes to the boundary
- Floor build-up and threshold detail coordinated so the new floor meets the existing one without a step
| Route | When it applies | Typical fee |
|---|---|---|
| Permitted development (Lawful Development Certificate) | Depth within 3m (terraced/semi) or 4m (detached), height and materials within PD limits | PD/LDC pack ~£950–£1,450 |
| Larger home extension (prior approval) | Depth up to 6m (terraced/semi) or 8m (detached), with neighbour notification | from £1,100 |
| Full householder planning permission | Extension exceeds PD/larger-home limits, or the property is in a conservation area with an Article 4 direction | Full Planning pack ~£1,600–£2,400 |
| Planning + Building Regulations (structural) | Combined planning and construction-ready pack with structural calculations for the opening and roof | Planning + Building Regs pack ~£2,200–£3,850 |
Rear Extension Drawings across Kingston
Rear Extension Drawings in Kingston — FAQs
How much does a rear extension cost to design in London?+
Do I need an architect for a rear extension?+
How long does it take to get rear extension drawings?+
What is the 45-degree rule?+
Will I need a Party Wall Agreement for a rear extension?+
Do I need planning permission for an extension in Kingston?+
My Kingston home is near the river — does flood risk affect my plans?+
Can I build a larger extension on a Coombe plot?+
How long does the Royal Borough of Kingston take to decide?+
How much do planning drawings cost in Kingston?+
Get your free Kingston planning assessment
Tell us your Kingston address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.