MCIAT chartered drawings · Fixed fees across all 33 London boroughs and Essex
25 Eccleston Place, Victoria, London SW1W 9NFhello@drawingsdirect.co.uk020 7864 7245WhatsApp

Free 2026 London Planning Report — House Extension Drawings in Kingston

Loft conversion bedroom with skylights, typical of a Kingston Surbiton villa or New Malden semi conversion
Kingston · London

House Extension Drawings in Kingston

Fixed-fee, MCIAT-chartered house extension drawings for Kingston homeowners — Royal Borough of Kingston upon Thames validation and local constraints handled from the start.

Free Kingston planning assessment

Tell us your Kingston address and project. A fixed quote and free planning appraisal land within one working day.

No obligation · No spam · Reply within 1 working day

Kingston upon Thames pairs the elegant Victorian and Edwardian villas and terraces of Surbiton and Norbiton with the interwar semi-detached suburbia that runs through New Malden, Chessington and Tolworth, and the substantial detached houses set across the Coombe hill and the riverside plots near the Thames. Rear extensions and loft conversions suit all of these house types, and each calls for a slightly different approach on the drawing board.

Two local factors shape design here more than most. Riverside plots near Kingston and the river sit within the Thames flood zone, where the council expects flood-risk and finished-floor-level considerations to be addressed, and conservation-area control across Surbiton, Coombe, Norbiton, Old Malden and the Kingston town centre governs materials and external design. The interwar semis of New Malden and Chessington, by contrast, often retain fuller permitted development rights for rear extensions and lofts, and Coombe's larger detached plots can carry more substantial schemes within design policy.

We prepare Kingston planning drawings tuned to your specific house type — a Surbiton villa, a New Malden semi or a Coombe detached home — confirming permitted development eligibility first and evidencing flood-risk or conservation considerations where a riverside or designated site is involved. The Royal Borough has eight weeks from the day after it receives a valid application, unless a longer period is agreed in writing. We prepare the drawings to the validation checklist. The fee is fixed and agreed up front, drawings typically follow within about seven days, and we offer free redraws until the council approves — the same council-accepted drawings an architect would produce.

Loft conversion bedroom with skylights, typical of a Kingston Surbiton villa or New Malden semi conversion
Isometric illustration of a Kingston home extension design
Proposed floor plan
Kingston

Planning in Kingston: what to know before you apply

Kingston controls design within conservation areas such as Surbiton, Coombe and the town centre. Thames flood-zone considerations apply on riverside plots. The interwar semis of New Malden and Chessington often retain permitted development rights for rear extensions and lofts — we confirm before drawing.

Typical Kingston housing stock

Victorian and Edwardian villas and terraces around Surbiton and Norbiton, interwar semi-detached suburbia through New Malden, Chessington and Tolworth, and larger detached houses on the Coombe hill and riverside plots near the Thames.

Areas we regularly draw for in Kingston

Kingston · Surbiton · New Malden · Chessington · Norbiton · Coombe · Tolworth · Old Malden

What the numbers say about Kingston planning decisions

These are Royal Borough of Kingston upon Thames’s own reported figures, published by government rather than estimated by us. They are what we design against — a borough that refuses one householder application in five needs a different drawing package from one that refuses one in twenty.

Permitted development in Kingston

Larger householder extensions put to Royal Borough of Kingston upon Thames under the prior-approval route, and lawful-development certificates decided, over eight quarters.

Prior approval not requiredWent ahead without a full application95
Prior approval granted11
Prior approval refused99
Granted where a decision was neededFrom 110 determinations10%
Building upwards, prior approval refused0
Certificates of lawful development decided593

Source: Ministry of Housing, Communities and Local Government (PS1 district planning application statistics). Open Government Licence v3.0 Extracted 2026-10-18.

What removes permitted development in Kingston

Live entries on the national planning registers for Royal Borough of Kingston upon Thames. Article 4 directions withdraw permitted development rights, so a project inside one needs a full application rather than prior approval. Revoked and expired entries are excluded.

Article 4 directions in force3
Areas they coverOne direction can cover many separate areas114
Conservation areasPermitted development is already narrower inside one28

Source: MHCLG Planning Data Platform. Open Government Licence v3.0 Extracted 2026-10-19.

House Extension Drawings for Kingston homes: the package and the process

Extension drawings are read for their dimensions. The proposed plan needs depth measured from the original rear wall — not from a previous extension — eaves and ridge heights taken from existing ground level, and the distance to each boundary marked. A site plan showing how much garden remains is what an officer reaches for when the amenity question comes up.

We draw the existing building accurately first, because everything else is measured from it. Where the original footprint has already been added to, that history goes on the drawing: it decides which allowances are still available and it is the first thing an officer checks against the council's own records.

The plot decides the extension type long before taste does. A mid-terrace has depth to work with and an alley if it is lucky; a semi has one clear flank; a detached house can go wide. Reading the building form first is what stops a design being drawn that the plot cannot take.

Which extension types do you draw?

Every London extension is shaped by the plot, the neighbours and the borough's design guidance. We draw them all.

Rear extension

A single-storey rear extension is often permitted development within depth limits — ideal for an open-plan kitchen-diner.

Side-return

Fills the alley beside a Victorian terrace, widening the ground floor without losing garden.

Wraparound

Combines a rear and side-return extension for a transformative ground floor, usually needing planning permission.

Double-storey

Adds space above and below, subject to tighter scale and neighbour-impact scrutiny.

Basement

Creates space downward where footprint is limited, with structural and party-wall care.

Do I need planning permission for a house extension in London?

Single-storey rear extensions within permitted development limits (up to 6m for terraced/semi-detached homes under the larger-home scheme, subject to neighbour consultation) may not need a full application. Wraparounds, double-storeys and anything in a conservation area usually do. We assess your plot and recommend the right route before drawing. The current depth, height and eaves limits are set out in full in the guide to planning permission for a rear extension.

How do you maximise the footprint the council will approve?

We know each borough's depth, height and daylight standards, so we design to the edge of what will be approved rather than guessing — and we check the 45-degree neighbour daylight rule and any rear building line before submission. Where a plot is tight we test a permitted-development scheme against a slightly larger householder application and show you the trade-off in space, cost and timescale, so the drawn scheme is the one that actually maximises value rather than just floor area.

Typical London extension drawing packages
ExtensionTypical routePackageFee from
Single-storey rearPermitted development / householderSurvey + planning or PD drawings£695
Side-returnHouseholder planningPlanning + building regs + structural£1,845
WraparoundHouseholder planningSurvey + householder planning drawings£1,095
Double-storeyHouseholder planningSurvey + householder planning drawings£995
Example house extension drawings sheet, drawn to the standard Royal Borough of Kingston upon Thames validates against
Example sheet showing how we draw house extension drawings to Royal Borough of Kingston upon Thames's validation standards.
FAQ

House Extension Drawings in Kingston — FAQs

How far can I extend without planning permission in London?+
Under permitted development, single-storey rear extensions can reach 3m (terraced/semi) or 4m (detached), or up to 6–8m under the prior-approval larger-home scheme — but conservation areas and Article 4 directions can remove these rights. We check your property first.
Do extension drawings include structural calculations?+
No, the extension drawing fee does not. A named, insured engineer prepares them as a separate service from £745, or your own engineer can, and we draw the beams onto the set so your builder can price the job; the all-inclusive package, £1,845–£3,145, includes them.
How long do extension drawings take?+
Typically about 7 days from survey to a full drawing set delivered to your online portal.
Will my rear extension need a party wall agreement?+
If you build up to or on a shared boundary, excavate near a neighbour's foundations, or cut into a party wall for a steel, the Party Wall etc. Act 1996 usually applies. Our drawings show the works clearly so a party wall surveyor — or your neighbour — can see exactly what is proposed, which keeps that process quick.
Can I extend a house in a conservation area?+
Yes, but conservation areas and Article 4 directions commonly remove permitted development for rear and side extensions, so the work needs a full householder application designed to the council's heritage guidance. We confirm your property's designation before recommending a route.
Do I need planning permission for an extension in Kingston?+
The interwar semis of New Malden, Chessington and Tolworth often keep permitted development rights for rear extensions and lofts, so a full application isn't always needed. In a conservation area such as Surbiton, Coombe or the town centre, side extensions, dormers and other roof enlargements, rear extensions over one storey and cladding are not permitted development. Riverside flood-zone constraints are a separate check. We check your address first and can confirm permitted development with a Lawful Development Certificate.
My Kingston home is near the river — does flood risk affect my plans?+
It can. Riverside plots near Kingston lie within the Thames flood zone, and the council expects flood-risk and finished-floor-level considerations to be addressed for works there. We evidence these within the application so the council can validate and approve without repeated revisions.
Can I build a larger extension on a Coombe plot?+
Often, yes. The substantial detached houses on the Coombe hill sit on generous plots that make larger rear and double-storey extensions viable, subject to design and amenity policy. We design to use the plot fully within permitted-development allowances or a well-evidenced full application, checking the limits for detached homes first.
How long does the Royal Borough of Kingston take to decide?+
Kingston has eight weeks beginning the day after a valid application comes in, unless extra time is agreed in writing. Conservation and riverside cases can involve additional consultation.
How much do planning drawings cost in Kingston?+
We agree a fixed fee before starting, taken from our published price list, with free redraws until Kingston approves. A suburban semi extension and a riverside or Coombe scheme differ in the evidence required, so we quote once we understand your address and project rather than by the hour.
Free Fixed Quote

Get your free Kingston planning assessment

Tell us your Kingston address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.