Rear extension behind a Victorian terrace in Kingston KT1, Royal Borough of Kingston upon Thames

Kingston · KT1 · Kingston

Rear Extension Drawings in Kingston KT1

Fixed-fee, MCIAT-chartered rear extension drawings for Kingston (KT1) homeowners — Royal Borough of Kingston upon Thames validation and local constraints handled from the start.

Kingston (KT1) is the historic heart of the Royal Borough, where the Kingston Old Town conservation area — designated in 1971 and covering some 334 properties — protects a medieval market-town core around All Saints Church and Market Place.

KT1 also contains the Fairfield / Knight's Park and Grove Crescent conservation areas, Victorian residential estates built in the 1860s and 1870s where alterations to terraces and villas are assessed against the area's original character.

Proposed floor plan

Kingston KT1

Kingston (KT1) — planning at a glance

Council: Royal Borough of Kingston upon Thames
Postcode district: KT1
Planning portal: View the Kingston planning portal
Housing stock: Victorian terraces and semi-detached villas around Knight's Park and Grove Crescent, set against the medieval market-town core of Kingston Old Town where the street pattern around All Saints Church and Market Place is the best-preserved of its type in outer London.
Article 4: Royal Borough of Kingston upon Thames does not publish its Article 4 directions to the national planning register, so permitted development rights in Kingston (KT1) can’t be confirmed from open data alone — we check the direction schedule with the council before recommending a route, as part of the fixed fee. The Royal Borough of Kingston holds Article 4 directions — including one removing the permitted-development right to convert commercial, business and service premises to residential use across the town centre — but the borough publishes no Article 4 rows to the national planning register, so KT1 householders should confirm the current position with the council's Article 4 map before assuming any right is intact.
Conservation: Kingston Old TownFairfield / Knight's ParkGrove Crescent
Sample streets: Grove Crescent · Knight's Park · Mill Street · Fairfield North
Local constraints: Kingston Old Town's medieval street pattern around All Saints Church and Market Place is the best-preserved of its type in outer London, so rooflines and frontages are tightly controlled.The Fairfield / Knight's Park conservation area covers roughly 550 properties over 21.4 hectares of 1860s-1870s terraces where extensions must respect the Victorian grain.Kingston's Article 4 directions are not published to the national register, so permitted-development rights in KT1 conservation areas cannot be assumed without checking the council map.

Planning in Kingston (KT1): what to know before you apply

Most central KT1 houses fall inside the Kingston Old Town, Fairfield / Knight's Park or Grove Crescent conservation areas, so even modest rear or roof extensions are judged against a Victorian or older grain. Because Kingston publishes no Article 4 rows to the national register, confirm the live position on the council's Article 4 map before relying on any permitted-development right.

Typical Kingston housing stock

Victorian terraces and semi-detached villas around Knight's Park and Grove Crescent, set against the medieval market-town core of Kingston Old Town where the street pattern around All Saints Church and Market Place is the best-preserved of its type in outer London.

Streets we regularly draw for in Kingston

Grove Crescent · Knight's Park · Mill Street · Fairfield North

What KT1 is actually built of

Measured from 204 classified residential buildings in KT1, not from a description of the area.

Kingston KT1 housing mix

Residential building form across the KT1 postcode district, from 204 classified buildings.

Attached on more than one side	29%
Attached on one side	57%
Detached	14%
Median building footprint	65 m²
Addresses per buildingAbove about 2 means flats and maisonettes dominate	1.68
Buildings classified	204

Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-08-17.

Rear Extension Drawings for Kingston (KT1) homes: the package and the process

Depth is the number the application turns on, and it has to be measured from the original rear wall of the house rather than from whatever is there now. The drawings carry that dimension, the eaves and ridge heights, the position of any rooflight, and the boundary distances on both sides.

Where the scheme goes beyond the standard allowance and relies on the larger home extension route, the drawings serve a second purpose: they are what the council sends to the neighbours during the consultation. A clear, dimensioned proposed elevation answers the objection about overshadowing before it is made.

Depth is limited by the plot as much as by the rules. A long garden behind a terrace can take the full allowance, while a short one runs out before the rules do — and on a semi or detached house the same depth reads very differently from the boundary.

Do I need planning permission for a rear extension in London?

Many single-storey rear extensions qualify as permitted development, meaning no planning application is needed, provided depth, height and materials stay within set limits. That changes if your property sits in a conservation area or is subject to an Article 4 direction, both of which can remove permitted development rights across a street or borough — in that case a full householder planning application is required regardless of size.

Even where an extension qualifies, most homeowners obtain a Lawful Development Certificate to confirm that status in writing before building — useful for mortgage lenders, buyers and Building Control. We check your property against your borough's constraints before recommending a route.

How deep can a single-storey rear extension go?

Depth is the main constraint on a rear extension, and it depends on your house type and whether you use standard permitted development or the larger home extension scheme.

Permitted development

Standard permitted development allows a single-storey rear extension up to 3 metres deep for terraced and semi-detached houses, or 4 metres for detached houses, generally with eaves height limited to match or stay close to the existing house.

Larger home extension scheme

The prior-approval scheme extends this to 6 metres for terraced and semi-detached houses and 8 metres for detached houses. Your council writes to affected neighbours; if none object within the notification period, approval follows without a full planning application. If an objection is raised, the council assesses the impact on neighbouring light and outlook itself, rather than automatically refusing, so a well-considered design still has a good chance of approval.

Designing the kitchen-diner: rooflights, bi-folds and daylight

Most rear extensions exist to create one open-plan kitchen, dining and living space, so the drawing work focuses on getting light and flow right within the depth you are allowed.

Structural opening sized for bi-fold or sliding doors across most of the rear elevation
Rooflights or a roof lantern positioned to light the centre of the room, away from the shadow line of the main house
Open-plan layout tested against the 45-degree rule, which protects daylight to your neighbours' windows and can limit how close a flank wall or roof comes to the boundary
Floor build-up and threshold detail coordinated so the new floor meets the existing one without a step

Rear extension routes at a glance
Route	When it applies	Typical fee
Permitted development (Lawful Development Certificate)	Depth within 3m (terraced/semi) or 4m (detached), height and materials within PD limits	PD/LDC pack ~£950–£1,450
Larger home extension (prior approval)	Depth up to 6m (terraced/semi) or 8m (detached), with neighbour notification	from £1,100
Full householder planning permission	Extension exceeds PD/larger-home limits, or the property is in a conservation area with an Article 4 direction	Full Planning pack ~£1,600–£2,400
Planning + Building Regulations (structural)	Combined planning and construction-ready pack with structural calculations for the opening and roof	Planning + Building Regs pack ~£2,200–£3,850

Sheet from a rear extension drawings package drawn for a Kingston property in KT1, showing the existing and proposed arrangement at scale — A sheet from the rear extension drawings package we submit to Royal Borough of Kingston upon Thames for Kingston (KT1) properties.

Also in Kingston KT1

Planning Permission Planning Drawings Architectural Drawings Building Regulations Drawings Loft Conversion Drawings Rear Extension Drawings across Kingston Rear Extension Drawings across London

FAQ

Rear Extension Drawings in Kingston KT1 — FAQs

How much does a rear extension cost to design in London?+

Rear extension drawings start from £1,100, with the final fee set by the route your extension takes — permitted development, prior approval or full planning — and whether you need building regulations and structural calculations bundled in. The fee is fixed and agreed upfront.

Do I need an architect for a rear extension?+

No. DrawingsDirect is an MCIAT-chartered architectural technologist practice, producing the same council-accepted drawings as an architect for a fixed fee typically around 30% lower.

How long does it take to get rear extension drawings?+

Drawings are typically ready around 7 days from survey. Once submitted, councils have a statutory 8-week period to determine a standard householder planning application.

What is the 45-degree rule?+

It is a daylight test many London councils apply to check that a rear extension does not block too much light to a neighbour's nearest window, measured as a line drawn at 45 degrees from that window. We check it before submission, not after a refusal.

Will I need a Party Wall Agreement for a rear extension?+

Only if your foundations or new walls sit on or near the boundary with a neighbouring property. A straightforward rear extension set within your own plot often does not trigger the Party Wall etc. Act 1996, unlike a Side Return or Wraparound extension, which usually does.

Do I need planning permission for an extension in Kingston?+

The interwar semis of New Malden, Chessington and Tolworth often keep permitted development rights for rear extensions and lofts, so a full application isn't always needed. Conservation areas such as Surbiton, Coombe and the town centre, and riverside flood-zone constraints, can restrict this. We check your address first and can confirm permitted development with a Lawful Development Certificate.

My Kingston home is near the river — does flood risk affect my plans?+

It can. Riverside plots near Kingston lie within the Thames flood zone, and the council expects flood-risk and finished-floor-level considerations to be addressed for works there. We evidence these within the application so the council can validate and approve without repeated revisions.

Can I build a larger extension on a Coombe plot?+

Often, yes. The substantial detached houses on the Coombe hill sit on generous plots that make larger rear and double-storey extensions viable, subject to design and amenity policy. We design to use the plot fully within permitted-development allowances or a well-evidenced full application, checking the limits for detached homes first.

How long does the Royal Borough of Kingston take to decide?+

Kingston determines most householder applications within the statutory eight-week period once validated; conservation and riverside cases can involve additional consultation. We prepare submissions to the council's validation checklist to avoid the drawing queries that cause most delays.

How much do planning drawings cost in Kingston?+

We agree a fixed fee before starting, typically around 30% below an architect's fee for the same council-accepted drawings, with free redraws until Kingston approves. A suburban semi extension and a riverside or Coombe scheme differ in the evidence required, so we quote once we understand your address and project rather than by the hour.

Free Fixed Quote

Get your free Kingston planning assessment

Tell us your Kingston (KT1) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.