Chipping Barnet · N20 · Barnet

Rear Extension Drawings in Chipping Barnet N20

Fixed-fee, MCIAT-chartered rear extension drawings for Chipping Barnet (N20) homeowners — London Borough of Barnet validation and local constraints handled from the start.

Chipping Barnet (N20) is a historic medieval market town strung along the Great North Road, granted its charter in 1199 and sitting on the high ridge of High Barnet. Its housing tells that story in layers: Victorian and Edwardian terraces and villas near the old High Street give way to interwar semi-detached and detached houses on the surrounding hillside roads, so most householder projects here are extensions or lofts that have to sit comfortably within a genuinely mixed streetscape.

There is no conservation area covering the N20 part of Chipping Barnet — that is a genuine, verified fact, not an omission. Its planning character is instead shaped by the mix of Victorian, Edwardian and interwar housing and by the London Borough of Barnet's householder design expectations, which lean on keeping original building lines, bay details, materials and roof forms intact. We treat that period character, rather than a conservation designation, as the reference point when we design an extension.

Demand for rear extensions, side infills and loft conversions runs steadily across roads like Oakleigh Park North, Langton Avenue and Buckingham Avenue, where generous interwar plots sit alongside tighter terraced runs closer to the town centre. We check each property's permitted-development position against Barnet's borough-wide controls first, then prepare drawings that either stay within permitted development or are ready to validate as a full householder application.

Proposed floor plan

Chipping Barnet N20

Chipping Barnet (N20) — planning at a glance

Council: London Borough of Barnet
Postcode district: N20
Planning portal: View the Barnet planning portal
Housing stock: A mix of Victorian and Edwardian terraces and villas near the old High Street, giving way to interwar semi-detached and detached houses on the surrounding hillside roads. This layering of periods is what drives the steady flow of rear-extension, side-infill and loft-conversion work across the district.
Article 4: No area-specific Article 4 direction is published for the N20 part of Chipping Barnet; the London Borough of Barnet's borough-wide permitted-development controls and householder design guidance still apply.
Sample streets: Swan Lane · Buckingham Avenue · Langton Avenue · Well Grove · Oakleigh Gardens · Oakleigh Park North · Oxford Gardens · Baxendale · Athenaeum Road · Attfield Close · Greenside Close · The Mount
Local constraints: A layered streetscape mixing Victorian and Edwardian terraces near the town centre with interwar semi-detached roads on the slopes, so extension proposals are read against the prevailing rhythm of each individual street rather than one uniform patternBarnet's borough-wide permitted-development limits and householder design guidance govern extension depth, height and coverage — no local Article 4 direction narrows them further in the N20 part of Chipping BarnetMatching original facing brick, render, bay-window detailing and roof tiles so a rear or side addition reads as part of the original house rather than an obvious bolt-onVaried plot and garden sizes between the tighter terraced runs near the High Street and the more generous interwar plots uphill, which changes how deep a single-storey rear extension can go before it needs a full householder applicationSemi-detached and terraced forms where side and rear building lines are shared with neighbours, making party-wall relationships and overshadowing central to what gets approvedSloping ridge topography on many hillside roads, where changes in level affect ridge heights, roof forms and how a loft conversion or rear addition sits relative to adjoining houses

Planning in Chipping Barnet (N20): what to know before you apply

Because Chipping Barnet mixes Victorian, Edwardian and interwar housing, Barnet assess extensions against the prevailing character of the individual street, so matching original brick, render, bay detailing and roof form matters as much as the numbers. There is no conservation area and no local Article 4 direction in the N20 part of the district, so many houses retain permitted development rights for rear and loft work — but varied plot sizes, shared building lines and the sloping ridge topography mean depth, height and neighbour impact are the points a householder application is judged on.

Typical Chipping Barnet housing stock

A mix of Victorian and Edwardian terraces and villas near the old High Street, giving way to interwar semi-detached and detached houses on the surrounding hillside roads. This layering of periods is what drives the steady flow of rear-extension, side-infill and loft-conversion work across the district.

Streets we regularly draw for in Chipping Barnet

Swan Lane · Buckingham Avenue · Langton Avenue · Well Grove · Oakleigh Gardens · Oakleigh Park North · Oxford Gardens · Baxendale · Athenaeum Road · Attfield Close · Greenside Close · The Mount

What N20 is actually built of

Measured from 391 classified residential buildings in N20, not from a description of the area.

Chipping Barnet N20 housing mix

Residential building form across the N20 postcode district, from 391 classified buildings.

Attached on more than one side	23%
Attached on one side	54%
Detached	24%
Median building footprint	93 m²
Addresses per buildingAbove about 2 means flats and maisonettes dominate	1.42
Buildings classified	391

Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-08-17.

Rear Extension Drawings for Chipping Barnet (N20) homes: the package and the process

Depth is the number the application turns on, and it has to be measured from the original rear wall of the house rather than from whatever is there now. The drawings carry that dimension, the eaves and ridge heights, the position of any rooflight, and the boundary distances on both sides.

Where the scheme goes beyond the standard allowance and relies on the larger home extension route, the drawings serve a second purpose: they are what the council sends to the neighbours during the consultation. A clear, dimensioned proposed elevation answers the objection about overshadowing before it is made.

Depth is limited by the plot as much as by the rules. A long garden behind a terrace can take the full allowance, while a short one runs out before the rules do — and on a semi or detached house the same depth reads very differently from the boundary.

Do I need planning permission for a rear extension in London?

Many single-storey rear extensions qualify as permitted development, meaning no planning application is needed, provided depth, height and materials stay within set limits. That changes if your property sits in a conservation area or is subject to an Article 4 direction, both of which can remove permitted development rights across a street or borough — in that case a full householder planning application is required regardless of size.

Even where an extension qualifies, most homeowners obtain a Lawful Development Certificate to confirm that status in writing before building — useful for mortgage lenders, buyers and Building Control. We check your property against your borough's constraints before recommending a route.

How deep can a single-storey rear extension go?

Depth is the main constraint on a rear extension, and it depends on your house type and whether you use standard permitted development or the larger home extension scheme.

Permitted development

Standard permitted development allows a single-storey rear extension up to 3 metres deep for terraced and semi-detached houses, or 4 metres for detached houses, generally with eaves height limited to match or stay close to the existing house.

Larger home extension scheme

The prior-approval scheme extends this to 6 metres for terraced and semi-detached houses and 8 metres for detached houses. Your council writes to affected neighbours; if none object within the notification period, approval follows without a full planning application. If an objection is raised, the council assesses the impact on neighbouring light and outlook itself, rather than automatically refusing, so a well-considered design still has a good chance of approval.

Designing the kitchen-diner: rooflights, bi-folds and daylight

Most rear extensions exist to create one open-plan kitchen, dining and living space, so the drawing work focuses on getting light and flow right within the depth you are allowed.

Structural opening sized for bi-fold or sliding doors across most of the rear elevation
Rooflights or a roof lantern positioned to light the centre of the room, away from the shadow line of the main house
Open-plan layout tested against the 45-degree rule, which protects daylight to your neighbours' windows and can limit how close a flank wall or roof comes to the boundary
Floor build-up and threshold detail coordinated so the new floor meets the existing one without a step

Rear extension routes at a glance
Route	When it applies	Typical fee
Permitted development (Lawful Development Certificate)	Depth within 3m (terraced/semi) or 4m (detached), height and materials within PD limits	PD/LDC pack ~£950–£1,450
Larger home extension (prior approval)	Depth up to 6m (terraced/semi) or 8m (detached), with neighbour notification	from £1,100
Full householder planning permission	Extension exceeds PD/larger-home limits, or the property is in a conservation area with an Article 4 direction	Full Planning pack ~£1,600–£2,400
Planning + Building Regulations (structural)	Combined planning and construction-ready pack with structural calculations for the opening and roof	Planning + Building Regs pack ~£2,200–£3,850

Sheet from a rear extension drawings package drawn for a Chipping Barnet property in N20, showing the existing and proposed arrangement at scale — A sheet from the rear extension drawings package we submit to London Borough of Barnet for Chipping Barnet (N20) properties.

Also in Chipping Barnet N20

Planning Permission Planning Drawings Architectural Drawings Building Regulations Drawings Loft Conversion Drawings Rear Extension Drawings across Barnet Rear Extension Drawings across London

FAQ

Rear Extension Drawings in Chipping Barnet N20 — FAQs

How much does a rear extension cost to design in London?+

Rear extension drawings start from £1,100, with the final fee set by the route your extension takes — permitted development, prior approval or full planning — and whether you need building regulations and structural calculations bundled in. The fee is fixed and agreed upfront.

Do I need an architect for a rear extension?+

No. DrawingsDirect is an MCIAT-chartered architectural technologist practice, producing the same council-accepted drawings as an architect for a fixed fee typically around 30% lower.

How long does it take to get rear extension drawings?+

Drawings are typically ready around 7 days from survey. Once submitted, councils have a statutory 8-week period to determine a standard householder planning application.

What is the 45-degree rule?+

It is a daylight test many London councils apply to check that a rear extension does not block too much light to a neighbour's nearest window, measured as a line drawn at 45 degrees from that window. We check it before submission, not after a refusal.

Will I need a Party Wall Agreement for a rear extension?+

Only if your foundations or new walls sit on or near the boundary with a neighbouring property. A straightforward rear extension set within your own plot often does not trigger the Party Wall etc. Act 1996, unlike a Side Return or Wraparound extension, which usually does.

Do I need planning permission to extend a house in Chipping Barnet?+

Not always. Many Chipping Barnet houses retain permitted development rights, so a modest single-storey rear extension or a rear loft conversion can often proceed without a full planning application. Because the district mixes tighter terraces with more generous interwar plots on sloping ground, we check your property's size limits, building lines and levels against Barnet's controls first, and prepare a full householder application where the project goes beyond permitted development.

Is Chipping Barnet in a conservation area?+

No. There is no conservation area covering the N20 part of Chipping Barnet. Its planning character is shaped instead by the layered mix of Victorian, Edwardian and interwar housing and Barnet's householder design expectations, which favour keeping original building lines, bay details, materials and roof forms intact when you extend.

How much do planning and building-regulation drawings cost for a Chipping Barnet extension?+

We work to fixed fees agreed before we start, with a typical turnaround of around seven days for a standard rear extension or loft on a Chipping Barnet house. As a chartered architectural technologist practice we produce the same council-accepted planning and building-regulation drawings as an architect, usually for a lower fee, and include free redraws until your application is approved.

How long does Barnet take to decide an application?+

Barnet determines most householder applications within the statutory eight-week period once validated; Suburb and conservation cases can involve additional consultation. We prepare Barnet submissions to the validation checklist, with the elevations and materials detail the council expects, to avoid the drawing queries that are the usual cause of delay.

Free Fixed Quote

Get your free Chipping Barnet planning assessment

Tell us your Chipping Barnet (N20) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.