Chipping Barnet · N20 · Barnet

Side Return Extension Drawings in Chipping Barnet N20

Fixed-fee, MCIAT-chartered side return extension drawings for Chipping Barnet (N20) homeowners — London Borough of Barnet validation and local constraints handled from the start.

Chipping Barnet (N20) is a historic medieval market town strung along the Great North Road, granted its charter in 1199 and sitting on the high ridge of High Barnet. Its housing tells that story in layers: Victorian and Edwardian terraces and villas near the old High Street give way to interwar semi-detached and detached houses on the surrounding hillside roads, so most householder projects here are extensions or lofts that have to sit comfortably within a genuinely mixed streetscape.

There is no conservation area covering the N20 part of Chipping Barnet — that is a genuine, verified fact, not an omission. Its planning character is instead shaped by the mix of Victorian, Edwardian and interwar housing and by the London Borough of Barnet's householder design expectations, which lean on keeping original building lines, bay details, materials and roof forms intact. We treat that period character, rather than a conservation designation, as the reference point when we design an extension.

Demand for rear extensions, side infills and loft conversions runs steadily across roads like Oakleigh Park North, Langton Avenue and Buckingham Avenue, where generous interwar plots sit alongside tighter terraced runs closer to the town centre. We check each property's permitted-development position against Barnet's borough-wide controls first, then prepare drawings that either stay within permitted development or are ready to validate as a full householder application.

Proposed floor plan

Chipping Barnet N20

Chipping Barnet (N20) — planning at a glance

Council: London Borough of Barnet
Postcode district: N20
Planning portal: View the Barnet planning portal
Housing stock: A mix of Victorian and Edwardian terraces and villas near the old High Street, giving way to interwar semi-detached and detached houses on the surrounding hillside roads. This layering of periods is what drives the steady flow of rear-extension, side-infill and loft-conversion work across the district.
Article 4: No area-specific Article 4 direction is published for the N20 part of Chipping Barnet; the London Borough of Barnet's borough-wide permitted-development controls and householder design guidance still apply.
Sample streets: Swan Lane · Buckingham Avenue · Langton Avenue · Well Grove · Oakleigh Gardens · Oakleigh Park North · Oxford Gardens · Baxendale · Athenaeum Road · Attfield Close · Greenside Close · The Mount
Local constraints: A layered streetscape mixing Victorian and Edwardian terraces near the town centre with interwar semi-detached roads on the slopes, so extension proposals are read against the prevailing rhythm of each individual street rather than one uniform patternBarnet's borough-wide permitted-development limits and householder design guidance govern extension depth, height and coverage — no local Article 4 direction narrows them further in the N20 part of Chipping BarnetMatching original facing brick, render, bay-window detailing and roof tiles so a rear or side addition reads as part of the original house rather than an obvious bolt-onVaried plot and garden sizes between the tighter terraced runs near the High Street and the more generous interwar plots uphill, which changes how deep a single-storey rear extension can go before it needs a full householder applicationSemi-detached and terraced forms where side and rear building lines are shared with neighbours, making party-wall relationships and overshadowing central to what gets approvedSloping ridge topography on many hillside roads, where changes in level affect ridge heights, roof forms and how a loft conversion or rear addition sits relative to adjoining houses

Planning in Chipping Barnet (N20): what to know before you apply

Because Chipping Barnet mixes Victorian, Edwardian and interwar housing, Barnet assess extensions against the prevailing character of the individual street, so matching original brick, render, bay detailing and roof form matters as much as the numbers. There is no conservation area and no local Article 4 direction in the N20 part of the district, so many houses retain permitted development rights for rear and loft work — but varied plot sizes, shared building lines and the sloping ridge topography mean depth, height and neighbour impact are the points a householder application is judged on.

Typical Chipping Barnet housing stock

A mix of Victorian and Edwardian terraces and villas near the old High Street, giving way to interwar semi-detached and detached houses on the surrounding hillside roads. This layering of periods is what drives the steady flow of rear-extension, side-infill and loft-conversion work across the district.

Streets we regularly draw for in Chipping Barnet

Swan Lane · Buckingham Avenue · Langton Avenue · Well Grove · Oakleigh Gardens · Oakleigh Park North · Oxford Gardens · Baxendale · Athenaeum Road · Attfield Close · Greenside Close · The Mount

What N20 is actually built of

Measured from 391 classified residential buildings in N20, not from a description of the area.

Chipping Barnet N20 housing mix

Residential building form across the N20 postcode district, from 391 classified buildings.

Attached on more than one side	23%
Attached on one side	54%
Detached	24%
Median building footprint	93 m²
Addresses per buildingAbove about 2 means flats and maisonettes dominate	1.42
Buildings classified	391

Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-08-17.

Side Return Extension Drawings for Chipping Barnet (N20) homes: the package and the process

A side return is a structural drawing as much as a planning one. Removing the original flank wall to open the kitchen into the infill needs a beam and a padstone detail, and the new roof has to be drawn where it meets both the existing rear elevation and the boundary wall.

The boundary is the sensitive line. The drawings set out where the new wall sits relative to it, how the roof drains without discharging next door, and where rooflights fall so the officer can see the room is lit without overlooking. That detail is also what your party wall surveyor will ask for.

The extension only exists where the alley does. Mid-terrace and end-of-terrace houses with a rear outrigger are the classic case; a semi with a flank path is a different scheme with different boundary questions; and a detached house has no side return to infill at all.

Do I need planning permission for a side return extension in London?

Permitted development rights for side extensions are narrower than for rear extensions: they generally cap the extension at a single storey, restrict its width to no more than half the width of the original house, and limit its height. In practice, a full-depth side return running the length of a Victorian or Edwardian terrace usually exceeds one or more of these limits, so most side return projects are drawn and submitted as a full householder planning application.

Conservation area status and Article 4 directions, common across inner London terraces, remove permitted development rights for side extensions entirely in many streets, reinforcing the need for a planning application. We check your property's status before drawing.

What does a side return extension involve?

A side return infills the alley at ground floor level, structurally opening the original flank wall of the kitchen into the new space so the two areas read as one room. Unlike a rear extension, which is bounded on three sides by your own garden, a side return is bounded on one long side by the neighbouring property, which shapes almost every decision in the design, from where the roof glazing sits to how deep the new foundations need to go.

New flank wall built out to align with the rear of the house, following the boundary line
Original external wall between kitchen and alley opened up and supported on a steel or glulam beam
Roof over the new space either glazed in full, glazed in a strip along the boundary for a 'light well' effect, or pitched and tiled to match the main roof
Kitchen re-planned across the combined footprint, often incorporating an island once the room widens

Will I need a Party Wall Agreement for a side return extension?

Almost certainly. Because the new side wall is built on or immediately against the boundary with the neighbouring property, the Party Wall etc. Act 1996 applies, and your neighbour must be formally notified before work starts. We prepare the drawings and dimensions your Party Wall surveyor needs, and time the notice period so it runs alongside, rather than after, your planning application.

Side return project options
Package	What it covers	Typical fee
Side return, planning only	Full householder planning application drawings for the infill	Full Planning pack ~£1,600–£2,400
Side return, planning + Building Regulations	Adds structural calculations, Party Wall drawings and construction detail	Planning + Building Regs pack ~£2,200–£3,850
Side return + rear extension (wraparound)	Combines both extensions into one L-shaped ground floor	see Wraparound Extension Drawings
Measured survey only	A measured existing floor-plan set for your own architect, surveyor or builder	from £450

Sheet from a side return extension drawings package drawn for a Chipping Barnet property in N20, showing the existing and proposed arrangement at scale — A sheet from the side return extension drawings package we submit to London Borough of Barnet for Chipping Barnet (N20) properties.

Also in Chipping Barnet N20

Planning Permission Planning Drawings Architectural Drawings Building Regulations Drawings Loft Conversion Drawings Side Return Extension Drawings across Barnet Side Return Extension Drawings across London

FAQ

Side Return Extension Drawings in Chipping Barnet N20 — FAQs

How much does a side return extension cost to design in London?+

Side return drawings start from £1,400. The final fee depends on whether you commission planning drawings alone or a combined planning and building regulations package with structural calculations, all fixed and agreed upfront.

Can I build a side return under permitted development?+

Rarely for a full-width, full-depth side return. Permitted development for side extensions is limited on width and storeys, and most Victorian and Edwardian terraces sit in conservation areas that remove these rights anyway, so a full planning application is the usual route. We still check your specific property first, since some semi-detached and detached houses outside conservation areas retain more generous side-extension allowances.

When do I need to serve Party Wall notice on my neighbour?+

Before work starts, and ideally once your drawings and structural design are settled, since the notice needs accurate dimensions. We can prepare the supporting drawings alongside your planning application so both processes run in parallel.

Do I need an architect for a side return extension?+

No. DrawingsDirect is an MCIAT-chartered architectural technologist practice, so you get the same council-accepted drawings as an architect, for a fixed fee typically around 30% lower, with structural calculations produced in-house.

How long does a side return extension take to design and approve?+

Drawings are typically ready around 7 days from survey. A householder planning application then has a statutory 8-week determination period, running alongside your Party Wall notice period.

Do I need planning permission to extend a house in Chipping Barnet?+

Not always. Many Chipping Barnet houses retain permitted development rights, so a modest single-storey rear extension or a rear loft conversion can often proceed without a full planning application. Because the district mixes tighter terraces with more generous interwar plots on sloping ground, we check your property's size limits, building lines and levels against Barnet's controls first, and prepare a full householder application where the project goes beyond permitted development.

Is Chipping Barnet in a conservation area?+

No. There is no conservation area covering the N20 part of Chipping Barnet. Its planning character is shaped instead by the layered mix of Victorian, Edwardian and interwar housing and Barnet's householder design expectations, which favour keeping original building lines, bay details, materials and roof forms intact when you extend.

How much do planning and building-regulation drawings cost for a Chipping Barnet extension?+

We work to fixed fees agreed before we start, with a typical turnaround of around seven days for a standard rear extension or loft on a Chipping Barnet house. As a chartered architectural technologist practice we produce the same council-accepted planning and building-regulation drawings as an architect, usually for a lower fee, and include free redraws until your application is approved.

How long does Barnet take to decide an application?+

Barnet determines most householder applications within the statutory eight-week period once validated; Suburb and conservation cases can involve additional consultation. We prepare Barnet submissions to the validation checklist, with the elevations and materials detail the council expects, to avoid the drawing queries that are the usual cause of delay.

Free Fixed Quote

Get your free Chipping Barnet planning assessment

Tell us your Chipping Barnet (N20) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.