Planning Drawings in Sanderstead CR2
Fixed-fee, MCIAT-chartered planning drawings for Sanderstead (CR2) homeowners — Croydon Council validation and local constraints handled from the start.
Sanderstead (CR2) sits high on the chalk of the North Downs and developed as a 1920s–1930s suburb after the railway arrived in 1884. Its housing is predominantly interwar detached and semi-detached houses on elevated, leafy roads rather than a dense urban grain, so most householder projects here are extensions or lofts that need to sit comfortably within spacious, green streets.
There is no conservation area covering the Sanderstead part of CR2 — that is a genuine, verified fact, not an omission. Its planning character is instead shaped by the consistency of the interwar suburban layout, the generous plots and setbacks, and the London Borough of Croydon's householder design expectations, which lean on keeping the spacing between houses, original materials and roof forms intact. We treat that suburban character, rather than a conservation designation, as the reference point when we design an extension.
Demand for rear extensions, side extensions and loft conversions runs steadily across roads like Mitchley Hill, Arundel Avenue and The Ridge Way, where detached and semi-detached houses sit on generous, sloping plots. We check each property's permitted-development position against Croydon's borough-wide controls first, then prepare drawings that either stay within permitted development or are ready to validate as a full householder application.
Planning in Sanderstead (CR2): what to know before you apply
Because Sanderstead is a consistent interwar suburb of detached and semi-detached houses, Croydon assess extensions against the spacing, setbacks and green character of the street, so preserving gaps between houses and matching original materials and roof form matters alongside the numbers. There is no conservation area and no local Article 4 direction in the Sanderstead part of CR2, so many houses retain permitted development rights for rear and loft work — but generous-but-finite plots, mature gardens and the sloping topography mean depth, height and neighbour impact are the points a householder application is judged on.
Typical Sanderstead housing stock
Predominantly interwar detached and semi-detached houses on spacious, elevated plots, with mature gardens and some postwar and modern infill. Those generous plots and leafy setbacks are what shape most of the rear-extension, side-extension and loft-conversion work across the area.
Streets we regularly draw for in Sanderstead
Mitchley Hill · Briton Hill Road · Hook Hill · Church Way · Arkwright Road · The Ridge Way · Arundel Avenue · Norfolk Avenue · Onslow Gardens · Cranleigh Gardens · Blenheim Gardens · Cranleigh Close
What CR2 is actually built of
Measured from 185 classified residential buildings in CR2, not from a description of the area.
Sanderstead CR2 housing mix
Residential building form across the CR2 postcode district, from 185 classified buildings.
| Attached on more than one side | 17% |
|---|---|
| Attached on one side | 42% |
| Detached | 41% |
| Median building footprint | 92 m² |
| Addresses per buildingAbove about 2 means flats and maisonettes dominate | 1.35 |
| Buildings classified | 185 |
Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-08-17.
Planning Drawings for Sanderstead (CR2) homes: the package and the process
A planning set is judged as a set, not as individual sheets. Every existing drawing needs its proposed counterpart at the same scale and orientation so the officer can read the change at a glance, each sheet needs its own number, title, scale bar and north point, and the whole package needs to survive being printed at A3 without a dimension becoming illegible.
We draw to the conventions validation teams expect: plans and elevations at 1:100 or 1:50, a location plan at 1:1250 with the site edged red, a block plan at 1:500, and sections cut where the change in level or roof form actually happens rather than where they are easiest to draw.
The drawing list itself changes with the building. A detached house needs four elevations; a mid-terrace needs two plus a section through the party walls to show what is not visible from outside. Getting that list right at the start is what stops a validation officer asking for a sheet three weeks in.
What is included in a planning drawing set?
A council will only validate an application that contains the right drawings at the right scale. Our standard planning set covers everything a London validation team expects.
- Site location plan (1:1250) and block plan (1:500)
- Existing floor plans, elevations and sections
- Proposed floor plans, elevations and sections
- Roof plans where relevant, with heights and materials annotated
- A design and access or heritage statement where the borough requires one
How are planning drawings different from building regulations drawings?
Planning drawings show what the building will look like and how it sits in its context. Building regulations drawings show how it will be built safely — structure, insulation, fire escape and drainage. Most projects need both; our Complete package covers the two together with structural calculations coordinated in-house.
How quickly can you produce planning drawings in London?
After a laser survey, a standard householder set is typically ready within 7 days. We review every drawing against your borough's validation checklist before it reaches a planner's desk, which is why our first-time approval rate sits around 96%.
| Drawing | Typical scale | What it shows |
|---|---|---|
| Site location plan | 1:1250 | The property in its street context, site edged red |
| Block plan | 1:500 | The building's footprint and position in the plot |
| Floor plans (existing & proposed) | 1:100 / 1:50 | Room layout, walls, openings and the proposed changes |
| Elevations (existing & proposed) | 1:100 / 1:50 | Each face of the building and how it changes |
| Sections | 1:100 / 1:50 | A cut through showing heights, levels and roof form |
Planning Drawings in Sanderstead CR2 — FAQs
What scale should London planning drawings be?+
Do I need an architect to produce planning drawings?+
How many revisions are included in the fee?+
Can you draw from my existing plans?+
Do planning drawings guarantee approval?+
Do I need planning permission to extend a house in Sanderstead?+
Is Sanderstead in a conservation area?+
How much do planning and building-regulation drawings cost for a Sanderstead extension?+
How long does Croydon Council take to decide?+
Get your free Sanderstead planning assessment
Tell us your Sanderstead (CR2) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.