Planning Drawings in Hammersmith W6
Fixed-fee, MCIAT-chartered planning drawings for Hammersmith (W6) homeowners — London Borough of Hammersmith & Fulham validation and local constraints handled from the start.
Hammersmith (W6) runs from the tight Victorian grid of Brackenbury Village up to the larger houses around Brook Green, and side-return and loft projects are the staple here. The Bradmore conservation area covers most of Brackenbury's streets, so what reads as a routine extension a few roads away is a conservation-area application within its boundary.
Brook Green adds a second, distinct context of larger period houses and stucco frontages under their own conservation-area control. We check which grid a Hammersmith property sits in — and where its boundary falls — before recommending a route, and prepare the drawings to the borough's design and validation standards.
Planning in Hammersmith (W6): what to know before you apply
W6 sits across the Bradmore and Brook Green conservation areas, which cover much of the residential grid and remove permitted development rights on many streets, so extensions and loft conversions are assessed against the borough's conservation guidance. London Borough of Hammersmith and Fulham does not publish an Article 4 schedule to the national open-data register, so an empty entry there is not evidence of absence — we confirm the current directions and conservation boundary with the council before advising.
Typical Hammersmith housing stock
Tight grids of two- and three-storey Victorian terraces around Brackenbury Village, larger stucco-fronted and villa houses toward Brook Green, and Edwardian red-brick mansion flats on the main approaches.
Streets we regularly draw for in Hammersmith
Brackenbury Road · Aldensley Road · Hammersmith Grove · Brook Green · Goldhawk Road
What W6 is actually built of
Measured from 388 classified residential buildings in W6, not from a description of the area.
Hammersmith W6 housing mix
Residential building form across the W6 postcode district, from 388 classified buildings.
| Attached on more than one side | 80% |
|---|---|
| Attached on one side | 17% |
| Detached | 3% |
| Median building footprint | 63 m² |
| Addresses per buildingAbove about 2 means flats and maisonettes dominate | 2.68 |
| Buildings classified | 388 |
Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-08-17.
Planning Drawings for Hammersmith (W6) homes: the package and the process
A planning set is judged as a set, not as individual sheets. Every existing drawing needs its proposed counterpart at the same scale and orientation so the officer can read the change at a glance, each sheet needs its own number, title, scale bar and north point, and the whole package needs to survive being printed at A3 without a dimension becoming illegible.
We draw to the conventions validation teams expect: plans and elevations at 1:100 or 1:50, a location plan at 1:1250 with the site edged red, a block plan at 1:500, and sections cut where the change in level or roof form actually happens rather than where they are easiest to draw.
The drawing list itself changes with the building. A detached house needs four elevations; a mid-terrace needs two plus a section through the party walls to show what is not visible from outside. Getting that list right at the start is what stops a validation officer asking for a sheet three weeks in.
What is included in a planning drawing set?
A council will only validate an application that contains the right drawings at the right scale. Our standard planning set covers everything a London validation team expects.
- Site location plan (1:1250) and block plan (1:500)
- Existing floor plans, elevations and sections
- Proposed floor plans, elevations and sections
- Roof plans where relevant, with heights and materials annotated
- A design and access or heritage statement where the borough requires one
How are planning drawings different from building regulations drawings?
Planning drawings show what the building will look like and how it sits in its context. Building regulations drawings show how it will be built safely — structure, insulation, fire escape and drainage. Most projects need both; our Complete package covers the two together with structural calculations coordinated in-house.
How quickly can you produce planning drawings in London?
After a laser survey, a standard householder set is typically ready within 7 days. We review every drawing against your borough's validation checklist before it reaches a planner's desk, which is why our first-time approval rate sits around 96%.
| Drawing | Typical scale | What it shows |
|---|---|---|
| Site location plan | 1:1250 | The property in its street context, site edged red |
| Block plan | 1:500 | The building's footprint and position in the plot |
| Floor plans (existing & proposed) | 1:100 / 1:50 | Room layout, walls, openings and the proposed changes |
| Elevations (existing & proposed) | 1:100 / 1:50 | Each face of the building and how it changes |
| Sections | 1:100 / 1:50 | A cut through showing heights, levels and roof form |
Planning Drawings in Hammersmith W6 — FAQs
What scale should London planning drawings be?+
Do I need an architect to produce planning drawings?+
How many revisions are included in the fee?+
Can you draw from my existing plans?+
Do planning drawings guarantee approval?+
Do I need planning permission for a side-return extension in Hammersmith & Fulham?+
Will I need a Basement Impact Assessment for a basement in Hammersmith & Fulham?+
What is special about the Peterborough Estate 'Lion houses'?+
How long does Hammersmith & Fulham take to decide?+
How much do planning drawings cost in Hammersmith & Fulham?+
Get your free Hammersmith planning assessment
Tell us your Hammersmith (W6) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.