MCIAT chartered drawings · Fixed fees across all 33 London boroughs

Free 2026 London Planning ReportPlanning Permission in Hammersmith W6

Side-return extension drawings for a Victorian terrace in Hammersmith W6, London Borough of Hammersmith and Fulham
Hammersmith · W6 · Hammersmith & Fulham

Planning Permission in Hammersmith W6

Fixed-fee, MCIAT-chartered planning permission for Hammersmith (W6) homeowners — London Borough of Hammersmith & Fulham validation and local constraints handled from the start.

Free Hammersmith planning assessment

Tell us your Hammersmith (W6) address and project. A fixed quote and free planning appraisal land within one working day.

No obligation · No spam · Reply within 1 working day

Hammersmith (W6) runs from the tight Victorian grid of Brackenbury Village up to the larger houses around Brook Green, and side-return and loft projects are the staple here. The Bradmore conservation area covers most of Brackenbury's streets, so what reads as a routine extension a few roads away is a conservation-area application within its boundary.

Brook Green adds a second, distinct context of larger period houses and stucco frontages under their own conservation-area control. We check which grid a Hammersmith property sits in — and where its boundary falls — before recommending a route, and prepare the drawings to the borough's design and validation standards.

Side-return extension drawings for a Victorian terrace in Hammersmith W6, London Borough of Hammersmith and Fulham
Isometric illustration of a Hammersmith W6 home planning permission design
Proposed floor plan
Hammersmith W6

Planning in Hammersmith (W6): what to know before you apply

W6 sits across the Bradmore and Brook Green conservation areas, which cover much of the residential grid and remove permitted development rights on many streets, so extensions and loft conversions are assessed against the borough's conservation guidance. London Borough of Hammersmith and Fulham does not publish an Article 4 schedule to the national open-data register, so an empty entry there is not evidence of absence — we confirm the current directions and conservation boundary with the council before advising.

Typical Hammersmith housing stock

Tight grids of two- and three-storey Victorian terraces around Brackenbury Village, larger stucco-fronted and villa houses toward Brook Green, and Edwardian red-brick mansion flats on the main approaches.

Streets we regularly draw for in Hammersmith

Brackenbury Road · Aldensley Road · Hammersmith Grove · Brook Green · Goldhawk Road

What W6 is actually built of

Measured from 388 classified residential buildings in W6, not from a description of the area.

Hammersmith W6 housing mix

Residential building form across the W6 postcode district, from 388 classified buildings.

Attached on more than one side80%
Attached on one side17%
Detached3%
Median building footprint63 m²
Addresses per buildingAbove about 2 means flats and maisonettes dominate2.68
Buildings classified388

Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-08-17.

Planning Permission for Hammersmith (W6) homes: the package and the process

A householder application is refused validation far more often than it is refused permission, and almost always for the same reasons: a location plan at the wrong scale, no red line around the application site, a missing ownership certificate, or elevations that do not show every face of the building affected. We prepare the full submission set — location plan, block plan, existing and proposed floor plans, elevations and sections — so the case officer receives a complete case on day one.

Once the application is live we stay on it. Officers routinely come back with questions about materials, boundary treatment or a dimension they cannot read off the drawings, and a fast, drawn answer is usually the difference between a decision inside the statutory period and a request to withdraw and resubmit.

Which route applies is decided by the building before it is decided by policy. A house that has never been extended usually has allowances left to use; a flat, a listed building or a home in a conservation area often has none, and the same drawing set then has to make a design case rather than a compliance one.

Do I need planning permission for an extension in London?

Many single-storey rear extensions, loft conversions and outbuildings fall under permitted development rights and do not need a full planning application — but London's dense housing stock, conservation areas and Article 4 directions frequently withdraw those rights. Before you pay for a full application, we check your property against the current permitted development thresholds and your borough's local constraints.

Where permitted development applies, we recommend a Lawful Development Certificate instead of full planning — it is faster, cheaper and gives you a legal document confirming the work was lawful. Where a full application is genuinely required, we prepare it properly the first time.

Permitted development vs a full planning application

Permitted development lets you build within defined volumetric limits without committee review. A full householder application is assessed against the borough's local plan for scale, daylight, neighbour impact and design. We advise which route your project qualifies for and why.

Article 4 directions and conservation areas

If your home sits in a conservation area or under an Article 4 direction, permitted development rights are often removed — meaning even modest changes need consent. Each borough page lists the local directions and conservation areas we routinely design around.

How do you apply for planning permission through the London Planning Portal?

We manage the full lifecycle of your submission — survey, drawings, supporting documents and officer liaison — so you never have to decode a validation checklist yourself.

Phase 1 — existing and proposed site surveys

A laser-measured survey captures your property exactly, so existing and proposed drawings match reality millimetre for millimetre.

Phase 2 — technical drawing package

Site location plan, block plan, floor plans, elevations and sections drawn to your borough's scale and formatting requirements, with a design and access statement where needed.

Phase 3 — liaison with the planning officer

We answer the council's queries, negotiate amendments, and redraw free until the decision lands.

How long does planning permission take, and what does it cost?

Drawings are typically ready within 7 days of survey. Your council then has a statutory 8 weeks to decide a householder application. Our drawing fees are fixed and quoted upfront — the table below shows typical packages.

Typical fixed-fee planning drawing packages
PackageProduction windowCompliance layerTypical fee
Permitted Development pack7–10 working daysLawful Development Certificate submission£950–£1,450
Full Planning pack10–14 working daysCouncil liaison & design statement£1,600–£2,400
Planning + Building Regs pack14–21 working daysStructural calculations included£2,200–£3,850
Sheet from a planning permission package drawn for a Hammersmith property in W6, showing the existing and proposed arrangement at scale
A sheet from the planning permission package we submit to London Borough of Hammersmith & Fulham for Hammersmith (W6) properties.
FAQ

Planning Permission in Hammersmith W6 — FAQs

How long does it take to get planning permission from a London council?+
Householder applications carry a statutory 8-week determination period. We deliver your drawings within about 7 days of survey, so the council clock can start quickly. Lawful Development Certificates usually resolve faster.
What happens if the council refuses?+
Refusals are rare because every drawing is checked against your borough's local plan before submission. If it happens we advise on revisions or handle the appeal — many refusals recover at appeal.
Do you cover my borough?+
Yes — we submit across all 33 London boroughs every week. Each borough has its own page covering local conservation, Article 4 and validation quirks.
Is the fee really fixed?+
Yes. We quote a fixed fee before we start and it does not move, even when the council asks for revisions — those redraws are free.
Do I need planning permission for a side-return extension in Hammersmith & Fulham?+
On the Victorian and Edwardian terraces of Fulham and Shepherd's Bush a single-storey side-return or rear extension can fall within permitted development, so a full application isn't always required. Conservation areas across Fulham, Brackenbury and Ravenscourt Park, and the Peterborough Estate, restrict this. We check your street's designation first and can confirm permitted development with a Lawful Development Certificate.
Will I need a Basement Impact Assessment for a basement in Hammersmith & Fulham?+
Likely, yes. The council applies a basement policy requiring a basement impact assessment for below-ground works, covering structural stability, drainage and groundwater. Basement extensions are common on these terraces, so if you are considering one we flag the requirement early and coordinate the structural input so the application is complete when submitted.
What is special about the Peterborough Estate 'Lion houses'?+
The Peterborough Estate's distinctive red-brick 'Lion houses' carry strong conservation control over their external character, so alterations are expected to respect the estate's materials and detailing. We design to that character and prepare a full householder application where permitted development doesn't apply, which is the reliable route to approval there.
How long does Hammersmith & Fulham take to decide?+
The council determines most householder applications within the statutory eight-week period once validated; basement and conservation cases can involve additional consultation. Because the terraces are party-wall-sensitive, we prepare submissions to the borough's residential extension and basement guidance to avoid the drawing queries that cause most delays.
How much do planning drawings cost in Hammersmith & Fulham?+
We agree a fixed fee before we start, typically around 30% below an architect's fee for the same council-accepted drawings, with free redraws until the council approves. A side-return, a loft and a basement differ in complexity, so we quote once we have seen your address and project rather than by the hour.
Free Fixed Quote

Get your free Hammersmith planning assessment

Tell us your Hammersmith (W6) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.