Planning Drawings in Fulham SW6
Fixed-fee, MCIAT-chartered planning drawings for Fulham (SW6) homeowners — London Borough of Hammersmith & Fulham validation and local constraints handled from the start.
Fulham (SW6) is one of west London's most consistent late-Victorian terraced neighbourhoods, and rear, side-return and basement projects dominate the workload. Several conservation areas — Parson's Green, Walham Green and Studdridge Street among them — cover large parts of the district, so whether a property sits inside one of those boundaries is the first thing that shapes an extension or loft scheme.
Basements are a defining Fulham project, and Hammersmith & Fulham applies a specific basement development policy controlling depth, structural method and impact on neighbours and trees. We confirm the conservation position and the basement-policy requirements before drawing, and prepare the application and structural drawings to the council's validation and design standards.
Planning in Fulham (SW6): what to know before you apply
SW6 has no householder Article 4 direction affecting typical rear or loft work, but its conservation areas mean permitted development cannot be assumed across much of Fulham, and Hammersmith & Fulham's basement development policy adds a further layer of control for the deep basements common here — both are checked at the outset.
Typical Fulham housing stock
Dense late-Victorian terraces across the Fulham 'streets' — the Peterborough Estate 'Lion houses' and the alphabet roads off New Kings Road — plus Edwardian mansion blocks around Parsons Green and newer riverside development toward the Thames.
Streets we regularly draw for in Fulham
Fulham Road · New Kings Road · Wandsworth Bridge Road · Munster Road
What SW6 is actually built of
Measured from 530 classified residential buildings in SW6, not from a description of the area.
Fulham SW6 housing mix
Residential building form across the SW6 postcode district, from 530 classified buildings.
| Attached on more than one side | 85% |
|---|---|
| Attached on one side | 13% |
| Detached | 2% |
| Median building footprint | 72 m² |
| Addresses per buildingAbove about 2 means flats and maisonettes dominate | 2.7 |
| Buildings classified | 530 |
Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-08-17.
Planning Drawings for Fulham (SW6) homes: the package and the process
A planning set is judged as a set, not as individual sheets. Every existing drawing needs its proposed counterpart at the same scale and orientation so the officer can read the change at a glance, each sheet needs its own number, title, scale bar and north point, and the whole package needs to survive being printed at A3 without a dimension becoming illegible.
We draw to the conventions validation teams expect: plans and elevations at 1:100 or 1:50, a location plan at 1:1250 with the site edged red, a block plan at 1:500, and sections cut where the change in level or roof form actually happens rather than where they are easiest to draw.
The drawing list itself changes with the building. A detached house needs four elevations; a mid-terrace needs two plus a section through the party walls to show what is not visible from outside. Getting that list right at the start is what stops a validation officer asking for a sheet three weeks in.
What is included in a planning drawing set?
A council will only validate an application that contains the right drawings at the right scale. Our standard planning set covers everything a London validation team expects.
- Site location plan (1:1250) and block plan (1:500)
- Existing floor plans, elevations and sections
- Proposed floor plans, elevations and sections
- Roof plans where relevant, with heights and materials annotated
- A design and access or heritage statement where the borough requires one
How are planning drawings different from building regulations drawings?
Planning drawings show what the building will look like and how it sits in its context. Building regulations drawings show how it will be built safely — structure, insulation, fire escape and drainage. Most projects need both; our Complete package covers the two together with structural calculations coordinated in-house.
How quickly can you produce planning drawings in London?
After a laser survey, a standard householder set is typically ready within 7 days. We review every drawing against your borough's validation checklist before it reaches a planner's desk, which is why our first-time approval rate sits around 96%.
| Drawing | Typical scale | What it shows |
|---|---|---|
| Site location plan | 1:1250 | The property in its street context, site edged red |
| Block plan | 1:500 | The building's footprint and position in the plot |
| Floor plans (existing & proposed) | 1:100 / 1:50 | Room layout, walls, openings and the proposed changes |
| Elevations (existing & proposed) | 1:100 / 1:50 | Each face of the building and how it changes |
| Sections | 1:100 / 1:50 | A cut through showing heights, levels and roof form |
Planning Drawings in Fulham SW6 — FAQs
What scale should London planning drawings be?+
Do I need an architect to produce planning drawings?+
How many revisions are included in the fee?+
Can you draw from my existing plans?+
Do planning drawings guarantee approval?+
Do I need planning permission for a side-return extension in Hammersmith & Fulham?+
Will I need a Basement Impact Assessment for a basement in Hammersmith & Fulham?+
What is special about the Peterborough Estate 'Lion houses'?+
How long does Hammersmith & Fulham take to decide?+
How much do planning drawings cost in Hammersmith & Fulham?+
Get your free Fulham planning assessment
Tell us your Fulham (SW6) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.