Planning Drawings in Earl's Court SW5
Fixed-fee, MCIAT-chartered planning drawings for Earl's Court (SW5) homeowners — Royal Borough of Kensington and Chelsea validation and local constraints handled from the start.
Earl's Court (SW5) is a district of grand stucco garden-square terraces — Earl's Court Square, Nevern Square and Philbeach Gardens — most of them converted into mansion and conversion flats. Projects here are typically flat reconfigurations, rear-closet and lower-ground alterations, and lightwell or modest basement works rather than whole-house extensions.
As the terraces fall within RBKC conservation areas and are largely in multiple occupation, we prepare drawings that respect the uniform stucco frontages and coordinate the leasehold and party-wall realities of flats, meeting the Royal Borough of Kensington and Chelsea's standard on external detail and subterranean control.
Planning in Earl's Court (SW5): what to know before you apply
There is no published householder Article 4 direction, but conservation-area status across SW5 withdraws most permitted-development rights and shapes what flat and rear alterations are acceptable. RBKC's subterranean development policy applies to lightwells and lower-ground excavation.
Typical Earl's Court housing stock
SW5 is characterised by tall stucco-fronted Victorian terraces set around Earl's Court Square, Nevern Square and Philbeach Gardens, the majority long since divided into mansion and conversion flats. Because whole houses are rare, work here is dominated by flat reconfigurations, rear-closet and lower-ground alterations, and lightwell or modest basement schemes.
Streets we regularly draw for in Earl's Court
Philbeach Gardens · Eardley Crescent · Nevern Square · Bina Gardens
What SW5 is actually built of
Measured from 214 classified residential buildings in SW5, not from a description of the area.
Earl's Court SW5 housing mix
Residential building form across the SW5 postcode district, from 214 classified buildings.
| Attached on more than one side | 85% |
|---|---|
| Attached on one side | 14% |
| Detached | 1% |
| Median building footprint | 100 m² |
| Addresses per buildingAbove about 2 means flats and maisonettes dominate | 6.17 |
| Buildings classified | 214 |
Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-08-17.
Planning Drawings for Earl's Court (SW5) homes: the package and the process
A planning set is judged as a set, not as individual sheets. Every existing drawing needs its proposed counterpart at the same scale and orientation so the officer can read the change at a glance, each sheet needs its own number, title, scale bar and north point, and the whole package needs to survive being printed at A3 without a dimension becoming illegible.
We draw to the conventions validation teams expect: plans and elevations at 1:100 or 1:50, a location plan at 1:1250 with the site edged red, a block plan at 1:500, and sections cut where the change in level or roof form actually happens rather than where they are easiest to draw.
The drawing list itself changes with the building. A detached house needs four elevations; a mid-terrace needs two plus a section through the party walls to show what is not visible from outside. Getting that list right at the start is what stops a validation officer asking for a sheet three weeks in.
What is included in a planning drawing set?
A council will only validate an application that contains the right drawings at the right scale. Our standard planning set covers everything a London validation team expects.
- Site location plan (1:1250) and block plan (1:500)
- Existing floor plans, elevations and sections
- Proposed floor plans, elevations and sections
- Roof plans where relevant, with heights and materials annotated
- A design and access or heritage statement where the borough requires one
How are planning drawings different from building regulations drawings?
Planning drawings show what the building will look like and how it sits in its context. Building regulations drawings show how it will be built safely — structure, insulation, fire escape and drainage. Most projects need both; our Complete package covers the two together with structural calculations coordinated in-house.
How quickly can you produce planning drawings in London?
After a laser survey, a standard householder set is typically ready within 7 days. We review every drawing against your borough's validation checklist before it reaches a planner's desk, which is why our first-time approval rate sits around 96%.
| Drawing | Typical scale | What it shows |
|---|---|---|
| Site location plan | 1:1250 | The property in its street context, site edged red |
| Block plan | 1:500 | The building's footprint and position in the plot |
| Floor plans (existing & proposed) | 1:100 / 1:50 | Room layout, walls, openings and the proposed changes |
| Elevations (existing & proposed) | 1:100 / 1:50 | Each face of the building and how it changes |
| Sections | 1:100 / 1:50 | A cut through showing heights, levels and roof form |
Planning Drawings in Earl's Court SW5 — FAQs
What scale should London planning drawings be?+
Do I need an architect to produce planning drawings?+
How many revisions are included in the fee?+
Can you draw from my existing plans?+
Do planning drawings guarantee approval?+
Do I need planning permission for works in Kensington & Chelsea?+
Can I build a basement in Kensington & Chelsea?+
My home is listed — what consent do I need?+
How long does the Royal Borough take to decide?+
How much do planning drawings cost in Kensington & Chelsea?+
Get your free Earl's Court planning assessment
Tell us your Earl's Court (SW5) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.