MCIAT chartered drawings · Fixed fees across all 33 London boroughs

Free 2026 London Planning ReportNew Build Drawings in Hammersmith W6

Side-return extension drawings for a Victorian terrace in Hammersmith W6, London Borough of Hammersmith and Fulham
Hammersmith · W6 · Hammersmith & Fulham

New Build Drawings in Hammersmith W6

Fixed-fee, MCIAT-chartered new build drawings for Hammersmith (W6) homeowners — London Borough of Hammersmith & Fulham validation and local constraints handled from the start.

Free Hammersmith planning assessment

Tell us your Hammersmith (W6) address and project. A fixed quote and free planning appraisal land within one working day.

No obligation · No spam · Reply within 1 working day

Hammersmith (W6) runs from the tight Victorian grid of Brackenbury Village up to the larger houses around Brook Green, and side-return and loft projects are the staple here. The Bradmore conservation area covers most of Brackenbury's streets, so what reads as a routine extension a few roads away is a conservation-area application within its boundary.

Brook Green adds a second, distinct context of larger period houses and stucco frontages under their own conservation-area control. We check which grid a Hammersmith property sits in — and where its boundary falls — before recommending a route, and prepare the drawings to the borough's design and validation standards.

Side-return extension drawings for a Victorian terrace in Hammersmith W6, London Borough of Hammersmith and Fulham
Isometric illustration of a Hammersmith W6 home new build drawings design
Proposed floor plan
Hammersmith W6

Planning in Hammersmith (W6): what to know before you apply

W6 sits across the Bradmore and Brook Green conservation areas, which cover much of the residential grid and remove permitted development rights on many streets, so extensions and loft conversions are assessed against the borough's conservation guidance. London Borough of Hammersmith and Fulham does not publish an Article 4 schedule to the national open-data register, so an empty entry there is not evidence of absence — we confirm the current directions and conservation boundary with the council before advising.

Typical Hammersmith housing stock

Tight grids of two- and three-storey Victorian terraces around Brackenbury Village, larger stucco-fronted and villa houses toward Brook Green, and Edwardian red-brick mansion flats on the main approaches.

Streets we regularly draw for in Hammersmith

Brackenbury Road · Aldensley Road · Hammersmith Grove · Brook Green · Goldhawk Road

What W6 is actually built of

Measured from 388 classified residential buildings in W6, not from a description of the area.

Hammersmith W6 housing mix

Residential building form across the W6 postcode district, from 388 classified buildings.

Attached on more than one side80%
Attached on one side17%
Detached3%
Median building footprint63 m²
Addresses per buildingAbove about 2 means flats and maisonettes dominate2.68
Buildings classified388

Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-08-17.

New Build Drawings for Hammersmith (W6) homes: the package and the process

A new dwelling is a full application rather than a householder one, and the drawing set reflects that: site layout with levels and boundaries, floor plans and elevations for the new building, sections showing how it sits in the ground, and street-scene elevations placing it against what is already there.

Two packages follow the approval — the planning set and the construction set — and they have to stay in step. Foundation design, drainage strategy, thermal performance and fire strategy are drawn for Building Control against the same geometry that was granted permission, so the built house matches the approved one.

An infill plot is designed against its neighbours. Plot width, the building line either side, and the ridge heights next door set what the new house can be — and on a tight urban site those constraints usually shape the design more than the brief does.

Is my plot suitable for a new build in London?

A feasibility assessment looks at plot size and shape, access, existing boundary conditions, relevant planning policy for the borough, and the likely impact of a new dwelling on neighbouring properties before any design work begins. Infill plots — a gap between existing buildings on a street — and backland plots — a garden or yard site behind existing houses, reached by a shared access — each raise different issues: infill schemes are usually judged on how well they match the scale, spacing and character of the street, while backland schemes are judged heavily on overlooking, garden loss for neighbours, and whether the access arrangement is acceptable. A feasibility study gives an honest view of whether a scheme is likely to succeed before you commit to full drawings.

What does pre-application advice add to a new build project?

Pre-application advice is a formal, paid process most London boroughs offer, where planning officers give written feedback on a proposed scheme before a full application is submitted. For a new build — where the principle of development itself is often the main issue, not just the design details — this feedback can be invaluable: it surfaces concerns around density, massing, daylight and sunlight or heritage context early enough to be addressed in the drawings, rather than discovered for the first time as a refusal reason months into a full application. We prepare and submit pre-application enquiries as part of the new build service where it is likely to strengthen the eventual planning application.

How do daylight, sunlight and overlooking affect a new build design?

London boroughs assess new dwellings against their effect on the daylight and sunlight reaching neighbouring homes and gardens, commonly using the 45-degree rule as an initial check on a proposal's massing and position relative to neighbouring windows, alongside more detailed daylight and sunlight assessment on sensitive sites. Overlooking and loss of privacy from new windows, upper floors or roof terraces are assessed similarly, and often shape decisions on window placement, floor-to-floor heights and the overall footprint and massing of the new building. Designing with these constraints from the earliest sketch stage, rather than adjusting for them after a refusal, is one of the main advantages of instructing feasibility and pre-application work before a full planning set.

New build project stages
StageWhat it establishesTypical fee guide
FeasibilityWhether the plot can support a new dwelling and the likely constraintsQuoted individually, from within the £2,500 new build fee
Pre-application adviceWritten borough feedback on the scheme before a full applicationQuoted individually alongside the planning fee
Full planning drawingsThe complete drawing set submitted for planning permissionFrom £2,500
Building regs and structuralConstruction-ready drawings and calculations for buildingFrom £2,200–£3,850, quoted once planning is settled
Sheet from a new build drawings package drawn for a Hammersmith property in W6, showing the existing and proposed arrangement at scale
A sheet from the new build drawings package we submit to London Borough of Hammersmith & Fulham for Hammersmith (W6) properties.
FAQ

New Build Drawings in Hammersmith W6 — FAQs

How much do new build drawings cost in London?+
New build drawings start from £2,500 for feasibility and a full planning drawing set on a straightforward infill or backland plot, with building regulations and structural drawings quoted separately once the planning design is agreed.
Can any garden or backland plot be built on in London?+
Not necessarily — backland and garden plots are assessed on access, overlooking, loss of garden amenity for neighbours and borough policy, and a feasibility assessment gives an honest early view of whether a scheme is likely to be supported.
Do I need pre-application advice before a full new build application?+
It is not mandatory, but for a new dwelling — where the principle of development is often the main issue — pre-application advice can surface concerns early enough to address them in the design, reducing the risk of refusal.
Do you handle building regulations and structural drawings for a new build, or only planning?+
Both — the full new build service covers planning, building regulations and structural drawings from one in-house team, so the design stays consistent from feasibility through to construction-ready drawings.
How long does a new build project take from feasibility to planning permission?+
This varies with site complexity and whether pre-application advice is sought, but a full planning application is determined within the statutory period the borough applies to the application type, once submitted via the Planning Portal.
Do I need planning permission for a side-return extension in Hammersmith & Fulham?+
On the Victorian and Edwardian terraces of Fulham and Shepherd's Bush a single-storey side-return or rear extension can fall within permitted development, so a full application isn't always required. Conservation areas across Fulham, Brackenbury and Ravenscourt Park, and the Peterborough Estate, restrict this. We check your street's designation first and can confirm permitted development with a Lawful Development Certificate.
Will I need a Basement Impact Assessment for a basement in Hammersmith & Fulham?+
Likely, yes. The council applies a basement policy requiring a basement impact assessment for below-ground works, covering structural stability, drainage and groundwater. Basement extensions are common on these terraces, so if you are considering one we flag the requirement early and coordinate the structural input so the application is complete when submitted.
What is special about the Peterborough Estate 'Lion houses'?+
The Peterborough Estate's distinctive red-brick 'Lion houses' carry strong conservation control over their external character, so alterations are expected to respect the estate's materials and detailing. We design to that character and prepare a full householder application where permitted development doesn't apply, which is the reliable route to approval there.
How long does Hammersmith & Fulham take to decide?+
The council determines most householder applications within the statutory eight-week period once validated; basement and conservation cases can involve additional consultation. Because the terraces are party-wall-sensitive, we prepare submissions to the borough's residential extension and basement guidance to avoid the drawing queries that cause most delays.
How much do planning drawings cost in Hammersmith & Fulham?+
We agree a fixed fee before we start, typically around 30% below an architect's fee for the same council-accepted drawings, with free redraws until the council approves. A side-return, a loft and a basement differ in complexity, so we quote once we have seen your address and project rather than by the hour.
Free Fixed Quote

Get your free Hammersmith planning assessment

Tell us your Hammersmith (W6) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.