Two-storey side extension on a detached Hayes BR2 house, planning drawings for Bromley Council approval

Hayes · BR2 · Bromley

Loft Conversion Drawings in Hayes BR2

Fixed-fee, MCIAT-chartered loft conversion drawings for Hayes (BR2) homeowners — London Borough of Bromley validation and local constraints handled from the start.

Hayes (BR2) is a green, low-density corner of the borough with roomy interwar detached and semi-detached homes, plus older village-core properties near Hayes station. The space on these plots lends itself to large rear extensions, two-storey side additions, garden rooms and loft conversions, most handled through Bromley's standard householder route.

The historic Hayes Village conservation area and the surrounding commons give the neighbourhood its identity and bring tighter control on materials, roofscape and anything affecting the open green setting. We design extensions that keep the generous plot gaps and building line intact and check tree protection near the commons, so schemes meet Bromley Council's conservation and amenity standards.

Proposed floor plan

Hayes BR2

Hayes (BR2) — planning at a glance

Council: London Borough of Bromley
Postcode district: BR2
Planning portal: View the Bromley planning portal
Housing stock: Hayes (BR2) is a leafy outer south-east suburb of generous interwar detached and semi-detached houses on wide plots, with older Victorian and cottage-style properties clustered around the historic village. Large gardens backing onto or near Hayes and Keston Commons make substantial rear and two-storey side extensions common.
Article 4: London Borough of Bromley does not publish its Article 4 directions to the national planning register, so permitted development rights in Hayes (BR2) can’t be confirmed from open data alone — we check the direction schedule with the council before recommending a route, as part of the fixed fee. No published householder Article 4 in Hayes (BR2); the leading controls are the Hayes Village conservation area and the protected common-land green setting
Conservation: Hayes VillageBromley Hayes and Keston Commons
Sample streets: Pickhurst Rise · Warren Road · Hawes Lane · The Knoll
Local constraints: Hayes Village conservation area controlling alterations, materials and street character in the historic coreCommon-land setting (Hayes and Keston Commons) protecting the open green backdrop and viewsSpacious interwar plots where two-storey side extensions must preserve the gaps and building line that give the suburb its characterMature trees and woodland edges around the commons frequently protected by TPOs, affecting garden buildings and extension footprints

Planning in Hayes (BR2): what to know before you apply

No published householder Article 4 direction in Hayes, so most work runs under permitted development or a standard Bromley householder application. Properties within the Hayes Village conservation area have reduced permitted-development rights, and plots near the commons face added scrutiny on trees, footprint and the protected green outlook.

Typical Hayes housing stock

Hayes (BR2) is a leafy outer south-east suburb of generous interwar detached and semi-detached houses on wide plots, with older Victorian and cottage-style properties clustered around the historic village. Large gardens backing onto or near Hayes and Keston Commons make substantial rear and two-storey side extensions common.

Streets we regularly draw for in Hayes

Pickhurst Rise · Warren Road · Hawes Lane · The Knoll

What BR2 is actually built of

Measured from 264 classified residential buildings in BR2, not from a description of the area.

Hayes BR2 housing mix

Residential building form across the BR2 postcode district, from 264 classified buildings.

Attached on more than one side	27%
Attached on one side	48%
Detached	25%
Median building footprint	76 m²
Addresses per buildingAbove about 2 means flats and maisonettes dominate	1.37
Buildings classified	264

Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-08-17.

Loft Conversion Drawings for Hayes (BR2) homes: the package and the process

A loft stands or falls on the section drawing. It has to prove usable head height along the length of the room, a staircase that meets the going and headroom rules without eating the landing below, floor joists sized for a habitable load rather than storage, and a means of escape that Building Control will accept — usually a protected stair, sometimes an escape window.

The same section does the planning work too, showing roof volume, ridge height and how the new form sits against the existing roof. Where the conversion relies on permitted development we set the volume out on the drawing as a calculation, so the position is evidenced rather than asserted.

Roof shape decides which conversion is even possible. A hipped roof has to become a gable before it offers full-width space; a shallow pitch may not deliver head height at any cost; and a terrace with a rear outrigger opens up an L-shaped option a detached house has no use for.

Do I need planning permission for a loft conversion in London?

Many loft conversions are permitted development, but volume limits (40m³ for terraced homes, 50m³ for detached and semi-detached), materials and the presence of a conservation area or Article 4 direction can change that. We assess your roof and borough and recommend the fastest lawful route — often a Lawful Development Certificate rather than a full planning application. A certificate is worth having even when the work is clearly permitted: it gives your buyer's solicitor and your building-control surveyor documentary proof the loft is lawful, which matters when you sell.

Which loft conversion type suits your roof?

The best conversion depends on your roof shape and the headroom it offers.

Dormer

A box dormer adds headroom and floor area at the rear and is the most common London loft — frequently permitted development.

Mansard

A mansard rebuilds the rear (or front and rear) roof slope for maximum space, common in conservation areas but usually needing planning permission.

Hip-to-gable

Extends a hipped roof to a vertical gable, ideal for semi-detached and end-of-terrace homes.

Velux / rooflight

The simplest option — rooflights within the existing roofline, almost always permitted development.

What building regulations apply to a loft conversion?

Loft conversions must meet fire escape, structural and insulation standards — a protected stairway, adequate floor joists and beams, and often a means of escape window. A loft that adds a third storey to a two-storey house triggers stricter fire-separation rules, including fire doors to habitable rooms off the new stairway. We coordinate the structural calculations with the drawings so the build proceeds without delays.

London loft conversion types, routes and typical fees
Loft type	Best for	Usual route	Fee from
Velux / rooflight	Roofs with existing headroom	Permitted development / LDC	£1,100
Dormer	Rear headroom + floor area	Permitted development / LDC	£1,300
Hip-to-gable	Semi and end-of-terrace roofs	Permitted development or planning	£1,600
Mansard	Maximum space, conservation areas	Full planning application	£2,200

Sheet from a loft conversion drawings package drawn for a Hayes property in BR2, showing the existing and proposed arrangement at scale — A sheet from the loft conversion drawings package we submit to London Borough of Bromley for Hayes (BR2) properties.

Also in Hayes BR2

Planning Permission Planning Drawings Architectural Drawings Building Regulations Drawings House Extension Drawings Loft Conversion Drawings across Bromley Loft Conversion Drawings across London

FAQ

Loft Conversion Drawings in Hayes BR2 — FAQs

How much do loft conversion drawings cost in London?+

Drawing packages typically start around £1,100 for a permitted development loft and rise for mansards or full planning applications with structural calculations. We quote a fixed fee upfront.

Will my loft need a fire escape window?+

Most loft conversions require a means of escape and a protected stairway under building regulations. We design these in from the start.

Is a dormer loft permitted development?+

Often yes, within the volume limits and outside conservation areas — but we always check your specific property and borough first, free.

Can I convert my loft if I live in a conservation area?+

Usually yes, but conservation areas and Article 4 directions often remove permitted development for rear dormers, so the work needs a full planning application and a roof-form the council will accept — commonly a mansard or discreet rear dormer. We check your borough's designation before recommending a route.

Do you provide the structural calculations for the steels?+

Yes. Our full package includes structural drawings and calculations for the floor beams and any ridge or purlin steels, coordinated in-house so your builder can price and build without waiting on a separate engineer.

Do I need planning permission for an extension in Bromley?+

Bromley has no borough-wide Article 4 direction affecting typical householder permitted development, so its detached and semi-detached homes often keep fuller rights than inner-London terraces — larger rear and single-storey extensions can qualify. The binding constraints are green-belt policy on outer properties and conservation control in Chislehurst, Keston and Bromley Town. We check both and can confirm permitted development with a Lawful Development Certificate.

Can I build a bigger extension because Bromley plots are larger?+

Often, yes. Bromley's generous interwar plots make substantial rear and double-storey extensions viable where an inner-London terrace could not accommodate them. The limit is usually policy rather than space — green belt restricts scale on outer properties, and conservation areas control design. We design to use the plot fully within those limits, checking permitted-development allowances for detached homes first.

How does green-belt designation affect my Bromley project?+

On green-belt properties toward Orpington, Chislehurst and the borough's edges, extensions are assessed against strict limits on disproportionate additions to the original dwelling. It does not rule out an extension, but scale and siting matter and the case must be evidenced carefully. We confirm whether your property is green belt and design a scheme that stays within policy.

How long does Bromley Council take to decide?+

Bromley determines most householder applications within the statutory eight-week period once validated. As London's largest borough by area, its casework spans suburban semis to green-belt properties, so a complete, correctly scaled submission is the best way to avoid a validation query and keep to that timescale.

How much do planning drawings cost in Bromley?+

We quote a fixed fee upfront, typically around 30% below an architect's charge for the same council-accepted drawings, with free redraws until Bromley approves. Because plots here allow larger schemes, the fee tracks the project's complexity — a single-storey rear differs from a double-storey or a green-belt case — and we confirm it once we understand your plans.

Free Fixed Quote

Get your free Hayes planning assessment

Tell us your Hayes (BR2) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.