House Extension Drawings in Beddington CR0
Fixed-fee, MCIAT-chartered house extension drawings for Beddington (CR0) homeowners — London Borough of Sutton validation and local constraints handled from the start.
Beddington (CR0) centres on a historic village core — Carew Manor and Beddington Park with its medieval church — that was surrounded by interwar suburban housing as south London expanded. Importantly, it lies within the London Borough of Sutton despite sharing the CR0 postcode with Croydon, so householder work here is governed by Sutton's controls. Most projects are extensions or lofts on the interwar semi-detached and terraced houses that ring the old village.
There is no conservation area covering the Beddington part of CR0 — that is a genuine, verified fact, not an omission. Its planning character is instead shaped by the contrast between the historic village nucleus and the surrounding interwar suburban streets, and by the London Borough of Sutton's householder design expectations, which lean on keeping original building lines, materials and roof forms intact. We treat that layered character, rather than a conservation designation, as the reference point when we design an extension.
Demand for rear extensions, side infills and loft conversions runs steadily across roads like Queenswood Avenue, Royston Avenue and Rookwood Avenue, where interwar houses sit on regular planned plots. We check each property's permitted-development position against Sutton's borough-wide controls first — and, for homes toward the Wandle, any surface-water drainage implications — then prepare drawings that either stay within permitted development or are ready to validate as a full householder application.
Planning in Beddington (CR0): what to know before you apply
Beddington sits within the London Borough of Sutton despite its CR0 postcode, so householder applications are validated and assessed by Sutton against the prevailing character of the interwar streets that ring the historic village. There is no conservation area and no local Article 4 direction in the Beddington part of CR0, so many houses retain permitted development rights for rear and loft work — but modest interwar plots, shared building lines and low-lying ground toward the Wandle mean depth, height, neighbour impact and drainage are the points a scheme is judged on.
Typical Beddington housing stock
A historic village nucleus surrounded by predominantly interwar semi-detached and terraced houses, with postwar and modern infill toward the Wandle. It is this interwar suburban ring, on regular planned plots, that drives most of the rear-extension, side-infill and loft-conversion work across the area.
Streets we regularly draw for in Beddington
Church Lane · Guy Road · Sandhills · Queen Elizabeth's Walk · Queenswood Avenue · Iberian Avenue · Royston Avenue · Goidel Close · Rookwood Avenue · Ferrers Avenue · Raleigh Avenue · Green Leaf Avenue
What CR0 is actually built of
Measured from 683 classified residential buildings in CR0, not from a description of the area.
Beddington CR0 housing mix
Residential building form across the CR0 postcode district, from 683 classified buildings.
| Attached on more than one side | 47% |
|---|---|
| Attached on one side | 46% |
| Detached | 7% |
| Median building footprint | 55 m² |
| Addresses per buildingAbove about 2 means flats and maisonettes dominate | 1.86 |
| Buildings classified | 683 |
Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-08-17.
House Extension Drawings for Beddington (CR0) homes: the package and the process
Extension drawings are read for their dimensions. The proposed plan needs depth measured from the original rear wall — not from a previous extension — eaves and ridge heights taken from existing ground level, and the distance to each boundary marked. A site plan showing how much garden remains is what an officer reaches for when the amenity question comes up.
We draw the existing building accurately first, because everything else is measured from it. Where the original footprint has already been added to, that history goes on the drawing: it decides which allowances are still available and it is the first thing an officer checks against the council's own records.
The plot decides the extension type long before taste does. A mid-terrace has depth to work with and an alley if it is lucky; a semi has one clear flank; a detached house can go wide. Reading the building form first is what stops a design being drawn that the plot cannot take.
Which extension types do you draw?
Every London extension is shaped by the plot, the neighbours and the borough's design guidance. We draw them all.
Rear extension
A single-storey rear extension is often permitted development within depth limits — ideal for an open-plan kitchen-diner.
Side-return
Fills the alley beside a Victorian terrace, widening the ground floor without losing garden.
Wraparound
Combines a rear and side-return extension for a transformative ground floor, usually needing planning permission.
Double-storey
Adds space above and below, subject to tighter scale and neighbour-impact scrutiny.
Basement
Creates space downward where footprint is limited, with structural and party-wall care.
Do I need planning permission for a house extension in London?
Single-storey rear extensions within permitted development limits (up to 6m for terraced/semi-detached homes under the larger-home scheme, subject to neighbour consultation) may not need a full application. Wraparounds, double-storeys and anything in a conservation area usually do. We assess your plot and recommend the right route before drawing. The current depth, height and eaves limits are set out in full in the guide to planning permission for a rear extension, and where you would rather one practice ran the design, the application and the building-regulations stage together, Architectural Drawings covers that full scope.
How do you maximise the footprint the council will approve?
We know each borough's depth, height and daylight standards, so we design to the edge of what will be approved rather than guessing — and we check the 45-degree neighbour daylight rule and any rear building line before submission. Where a plot is tight we test a permitted-development scheme against a slightly larger householder application and show you the trade-off in space, cost and timescale, so the drawn scheme is the one that actually maximises value rather than just floor area.
| Extension | Typical route | Package | Fee from |
|---|---|---|---|
| Single-storey rear | Permitted development / householder | Planning + building regs | £1,100 |
| Side-return | Householder planning | Planning + building regs + structural | £1,600 |
| Wraparound | Householder planning | Full package + structural | £2,200 |
| Double-storey | Householder planning | Full package + structural | £2,400 |
House Extension Drawings in Beddington CR0 — FAQs
How far can I extend without planning permission in London?+
Do extension drawings include structural calculations?+
How long do extension drawings take?+
Will my rear extension need a party wall agreement?+
Can I extend a house in a conservation area?+
Do I need planning permission to extend a house in Beddington?+
Is Beddington in a conservation area?+
How much do planning and building-regulation drawings cost for a Beddington extension?+
How long does Sutton Council take to decide?+
Get your free Beddington planning assessment
Tell us your Beddington (CR0) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.