Wraparound Extension Drawings in Beddington CR0
Fixed-fee, MCIAT-chartered wraparound extension drawings for Beddington (CR0) homeowners — London Borough of Sutton validation and local constraints handled from the start.
Beddington (CR0) centres on a historic village core — Carew Manor and Beddington Park with its medieval church — that was surrounded by interwar suburban housing as south London expanded. Importantly, it lies within the London Borough of Sutton despite sharing the CR0 postcode with Croydon, so householder work here is governed by Sutton's controls. Most projects are extensions or lofts on the interwar semi-detached and terraced houses that ring the old village.
There is no conservation area covering the Beddington part of CR0 — that is a genuine, verified fact, not an omission. Its planning character is instead shaped by the contrast between the historic village nucleus and the surrounding interwar suburban streets, and by the London Borough of Sutton's householder design expectations, which lean on keeping original building lines, materials and roof forms intact. We treat that layered character, rather than a conservation designation, as the reference point when we design an extension.
Demand for rear extensions, side infills and loft conversions runs steadily across roads like Queenswood Avenue, Royston Avenue and Rookwood Avenue, where interwar houses sit on regular planned plots. We check each property's permitted-development position against Sutton's borough-wide controls first — and, for homes toward the Wandle, any surface-water drainage implications — then prepare drawings that either stay within permitted development or are ready to validate as a full householder application.
Planning in Beddington (CR0): what to know before you apply
Beddington sits within the London Borough of Sutton despite its CR0 postcode, so householder applications are validated and assessed by Sutton against the prevailing character of the interwar streets that ring the historic village. There is no conservation area and no local Article 4 direction in the Beddington part of CR0, so many houses retain permitted development rights for rear and loft work — but modest interwar plots, shared building lines and low-lying ground toward the Wandle mean depth, height, neighbour impact and drainage are the points a scheme is judged on.
Typical Beddington housing stock
A historic village nucleus surrounded by predominantly interwar semi-detached and terraced houses, with postwar and modern infill toward the Wandle. It is this interwar suburban ring, on regular planned plots, that drives most of the rear-extension, side-infill and loft-conversion work across the area.
Streets we regularly draw for in Beddington
Church Lane · Guy Road · Sandhills · Queen Elizabeth's Walk · Queenswood Avenue · Iberian Avenue · Royston Avenue · Goidel Close · Rookwood Avenue · Ferrers Avenue · Raleigh Avenue · Green Leaf Avenue
What CR0 is actually built of
Measured from 683 classified residential buildings in CR0, not from a description of the area.
Beddington CR0 housing mix
Residential building form across the CR0 postcode district, from 683 classified buildings.
| Attached on more than one side | 47% |
|---|---|
| Attached on one side | 46% |
| Detached | 7% |
| Median building footprint | 55 m² |
| Addresses per buildingAbove about 2 means flats and maisonettes dominate | 1.86 |
| Buildings classified | 683 |
Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-08-17.
Wraparound Extension Drawings for Beddington (CR0) homes: the package and the process
A wraparound is assessed as one addition, so the drawings have to present it as one: a single proposed footprint with the rear depth and the side width both dimensioned, the roof drawn as it turns the corner, and the remaining garden shown on the site plan.
The corner is where the technical work sits. Two roof planes and two structural spans meet at the return, drainage has to get round it, and the internal opening is usually wide enough to need a designed frame rather than a single beam. We resolve that junction on the drawings before it becomes a question on site.
A wraparound needs both a rear garden and a side alley, which in practice means a terrace or end-of-terrace with an outrigger. Where only one of the two exists, the honest answer is a rear extension or a side return — the combined footprint has nowhere to turn the corner.
What makes a wraparound extension different from a rear or side return alone?
A rear extension adds depth at the back of the house; a side return adds width down the alley; a wraparound does both at once, so the new floor area turns the corner of the original building rather than sitting against just one wall. The result is typically the largest open-plan space a single-storey extension can deliver, but it also means more of the original external wall is removed and more of the roof is new, which raises the structural and drainage stakes compared with either extension on its own. Homeowners who start out planning a rear extension or a side return alone often move to a wraparound once they see how little extra it costs to combine the two, since much of the groundwork, roof structure and glazing is shared between them rather than duplicated.
Do wraparound extensions need full planning permission in London?
Almost always, yes. Permitted development allowances are calculated on combined additions to the original house, and a wraparound's depth plus width together generally exceed the volume and footprint limits that apply to a rear extension or side extension considered separately. A Lawful Development Certificate route is rarely viable for a genuine wraparound.
Conservation area status and Article 4 directions, common across the terraced streets where wraparound extensions are most popular, remove permitted development rights further still, so we design every wraparound on the assumption it will go through full householder planning.
Structural design for a wraparound extension
Because the new space turns a corner, the structural frame has to work as one continuous system rather than two independent extensions bolted together.
- A continuous steel or ring-beam frame carrying the roof around the internal corner where the rear and side elements meet
- A glazed roof lantern or rooflight strip often placed at the corner junction, where natural light reaches deepest into the combined plan
- Foundations for both the rear and side elements designed together, so they tie into the existing house consistently
- Bi-fold or sliding doors across the rear elevation, coordinated with the side glazing so the two elements read as one space
| Route | What it covers | Typical fee |
|---|---|---|
| Full planning permission | Required for almost all wraparound extensions given the combined footprint | Full Planning pack ~£1,600–£2,400 |
| Planning + Building Regulations (structural) | Combined pack including structural calculations for the L-shaped frame and drainage diversion | Planning + Building Regs pack ~£2,200–£3,850 |
| Rear extension alone (comparison) | Smaller single-storey addition, may qualify for permitted development | see Rear Extension Drawings, from £1,100 |
| Side return alone (comparison) | Widens the kitchen only, keeps garden depth unchanged | see Side Return Extension Drawings, from £1,400 |
Wraparound Extension Drawings in Beddington CR0 — FAQs
How much does a wraparound extension cost to design in London?+
Does a wraparound extension always need planning permission?+
Do I need an architect for a wraparound extension?+
Will I need a Party Wall Agreement for a wraparound extension?+
How long does it take to get wraparound extension drawings?+
Do I need planning permission to extend a house in Beddington?+
Is Beddington in a conservation area?+
How much do planning and building-regulation drawings cost for a Beddington extension?+
How long does Sutton Council take to decide?+
Get your free Beddington planning assessment
Tell us your Beddington (CR0) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.