Wraparound Extension Drawings in Bromley
Fixed-fee, MCIAT-chartered wraparound extension drawings for Bromley homeowners — London Borough of Bromley validation and local constraints handled from the start.
As London's largest borough by area, Bromley offers the generous interwar detached and semi-detached plots that make substantial rear and double-storey extensions genuinely viable. The housing stock runs from suburban semis around Beckenham, Penge and West Wickham to larger detached homes and edge-of-London properties toward Orpington, Hayes and Chislehurst. The right Bromley application is usually about maximising a large plot within policy rather than squeezing a tight terrace, and the room to build is exactly why so many owners here extend rather than move.
Two constraints shape what is achievable. Green-belt designation across the borough's outer edges restricts the scale of additions on properties toward Orpington and Chislehurst, where extensions are assessed against strict limits on disproportionate additions to the original dwelling. Conservation control in Chislehurst, Keston, Hayes, Park Langley and Bromley Town governs materials and design in those areas. Bromley has no borough-wide Article 4 direction affecting typical householder permitted development, so detached homes here often retain fuller rights than inner-London terraces, which we always check first.
We prepare Bromley planning drawings that use the available plot fully while respecting green-belt and conservation constraints, confirming permitted development limits for detached and semi-detached homes before we draw and evidencing green-belt cases carefully where they apply. Because the plots allow larger schemes, we design to the project rather than a standard template, and we agree a fixed fee up front, typically around 30% below an architect's charge for the same council-accepted drawings, with free redraws until Bromley approves. The council determines most householder applications within the statutory eight-week period once validated, so a complete, correctly scaled, validation-first submission is the best way to hold that timescale.
Planning in Bromley: what to know before you apply
Bromley has no borough-wide Article 4 direction affecting typical householder permitted development; the binding constraints are green-belt policy on outer properties and conservation-area control in Chislehurst, Keston and Bromley Town. Detached homes here often retain fuller permitted development rights than inner-London terraces.
Typical Bromley housing stock
Large interwar detached and semi-detached houses with generous plots, plus green-belt and edge-of-London properties toward Orpington and Chislehurst.
Areas we regularly draw for in Bromley
Bromley · Beckenham · Orpington · Chislehurst · Penge · Hayes · West Wickham
What the numbers say about Bromley planning decisions
These are London Borough of Bromley’s own reported figures, published by government rather than estimated by us. They are what we design against — a borough that refuses one householder application in five needs a different drawing package from one that refuses one in twenty.
Permitted development in Bromley
Larger householder extensions put to London Borough of Bromley under the prior-approval route, and lawful-development certificates decided, over eight quarters.
| Prior approval not requiredWent ahead without a full application | 201 |
|---|---|
| Prior approval granted | 11 |
| Prior approval refused | 23 |
| Granted where a decision was neededFrom 34 determinations | 32% |
| Building upwards, prior approval refused | 5 |
| Certificates of lawful development decided | 1,010 |
Source: Ministry of Housing, Communities and Local Government (PS1 district planning application statistics). Open Government Licence v3.0 Extracted 2026-08-16.
What removes permitted development in Bromley
Live entries on the national planning registers for London Borough of Bromley. Article 4 directions withdraw permitted development rights, so a project inside one needs a full application rather than prior approval. Revoked and expired entries are excluded.
| Article 4 directions in force | 108 |
|---|---|
| Conservation areasPermitted development is already narrower inside one | 69 |
Source: MHCLG Planning Data Platform. Open Government Licence v3.0 Extracted 2026-08-16.
Wraparound Extension Drawings for Bromley homes: the package and the process
A wraparound is assessed as one addition, so the drawings have to present it as one: a single proposed footprint with the rear depth and the side width both dimensioned, the roof drawn as it turns the corner, and the remaining garden shown on the site plan.
The corner is where the technical work sits. Two roof planes and two structural spans meet at the return, drainage has to get round it, and the internal opening is usually wide enough to need a designed frame rather than a single beam. We resolve that junction on the drawings before it becomes a question on site.
A wraparound needs both a rear garden and a side alley, which in practice means a terrace or end-of-terrace with an outrigger. Where only one of the two exists, the honest answer is a rear extension or a side return — the combined footprint has nowhere to turn the corner.
What makes a wraparound extension different from a rear or side return alone?
A rear extension adds depth at the back of the house; a side return adds width down the alley; a wraparound does both at once, so the new floor area turns the corner of the original building rather than sitting against just one wall. The result is typically the largest open-plan space a single-storey extension can deliver, but it also means more of the original external wall is removed and more of the roof is new, which raises the structural and drainage stakes compared with either extension on its own. Homeowners who start out planning a rear extension or a side return alone often move to a wraparound once they see how little extra it costs to combine the two, since much of the groundwork, roof structure and glazing is shared between them rather than duplicated.
Do wraparound extensions need full planning permission in London?
Almost always, yes. Permitted development allowances are calculated on combined additions to the original house, and a wraparound's depth plus width together generally exceed the volume and footprint limits that apply to a rear extension or side extension considered separately. A Lawful Development Certificate route is rarely viable for a genuine wraparound.
Conservation area status and Article 4 directions, common across the terraced streets where wraparound extensions are most popular, remove permitted development rights further still, so we design every wraparound on the assumption it will go through full householder planning.
Structural design for a wraparound extension
Because the new space turns a corner, the structural frame has to work as one continuous system rather than two independent extensions bolted together.
- A continuous steel or ring-beam frame carrying the roof around the internal corner where the rear and side elements meet
- A glazed roof lantern or rooflight strip often placed at the corner junction, where natural light reaches deepest into the combined plan
- Foundations for both the rear and side elements designed together, so they tie into the existing house consistently
- Bi-fold or sliding doors across the rear elevation, coordinated with the side glazing so the two elements read as one space
| Route | What it covers | Typical fee |
|---|---|---|
| Full planning permission | Required for almost all wraparound extensions given the combined footprint | Full Planning pack ~£1,600–£2,400 |
| Planning + Building Regulations (structural) | Combined pack including structural calculations for the L-shaped frame and drainage diversion | Planning + Building Regs pack ~£2,200–£3,850 |
| Rear extension alone (comparison) | Smaller single-storey addition, may qualify for permitted development | see Rear Extension Drawings, from £1,100 |
| Side return alone (comparison) | Widens the kitchen only, keeps garden depth unchanged | see Side Return Extension Drawings, from £1,400 |
Wraparound Extension Drawings across Bromley
Wraparound Extension Drawings in Bromley — FAQs
How much does a wraparound extension cost to design in London?+
Does a wraparound extension always need planning permission?+
Do I need an architect for a wraparound extension?+
Will I need a Party Wall Agreement for a wraparound extension?+
How long does it take to get wraparound extension drawings?+
Do I need planning permission for an extension in Bromley?+
Can I build a bigger extension because Bromley plots are larger?+
How does green-belt designation affect my Bromley project?+
How long does Bromley Council take to decide?+
How much do planning drawings cost in Bromley?+
Get your free Bromley planning assessment
Tell us your Bromley address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.