Side-return extension to a Victorian terrace in Kew TW9, planning drawings for Richmond Council near Kew Gardens

Kew · TW9 · Richmond

Side Return Extension Drawings in Kew TW9

Fixed-fee, MCIAT-chartered side return extension drawings for Kew (TW9) homeowners — London Borough of Richmond upon Thames validation and local constraints handled from the start.

Kew (TW9) is largely Victorian and Edwardian terraces and villas with Georgian houses around Kew Green, so the common project is a side-return or full-width kitchen extension, a rear addition, or a loft conversion that keeps the historic street frontage unchanged.

With several conservation areas and the Royal Botanic Gardens World Heritage Site next door, we design additions that preserve the terrace rhythm, roofline and long views, and prepare the heritage and townscape justification Richmond Council expects for approval.

Proposed floor plan

Kew TW9

Kew (TW9) — planning at a glance

Council: London Borough of Richmond upon Thames
Postcode district: TW9
Planning portal: View the Richmond planning portal
Housing stock: Victorian and Edwardian terraces and semi-detached villas make up most of Kew, with fine Georgian houses fronting Kew Green and characterful Edwardian terraces such as Lawn Crescent. Rear gardens suit side-return and full-width kitchen extensions, while lofts add space without altering the frontage.
Article 4: London Borough of Richmond upon Thames does not publish its Article 4 directions to the national planning register, so permitted development rights in Kew (TW9) can’t be confirmed from open data alone — we check the direction schedule with the council before recommending a route, as part of the fixed fee. Heritage townscape around Kew Green and the Royal Botanic Gardens World Heritage Site imposes tight control on rooflines, materials and views.
Conservation: Kew GreenKew RoadKew GardensLawn CrescentRoyal Botanic Gardens Kew
Sample streets: Lawn Crescent · Leyborne Park · Gainsborough Road · Alexandra Road
Local constraints: Multiple conservation areas (Kew Green, Kew Road, Kew Gardens, Lawn Crescent) control frontages, rooflines and materials across the neighbourhoodProximity to the Royal Botanic Gardens, a World Heritage Site, brings strong protection of townscape and long viewsConsistent Victorian and Edwardian terraced rhythm means rear and roof extensions are assessed for their effect on the wider terraceStreet trees and garden trees are frequently protected, affecting single-storey extension footprints

Planning in Kew (TW9): what to know before you apply

No published householder Article 4 direction, but Kew's conservation areas and the adjacent Royal Botanic Gardens World Heritage Site mean strict control of materials, rooflines and protected views; rear extension depth is governed by neighbour amenity and terrace character.

Typical Kew housing stock

Victorian and Edwardian terraces and semi-detached villas make up most of Kew, with fine Georgian houses fronting Kew Green and characterful Edwardian terraces such as Lawn Crescent. Rear gardens suit side-return and full-width kitchen extensions, while lofts add space without altering the frontage.

Streets we regularly draw for in Kew

Lawn Crescent · Leyborne Park · Gainsborough Road · Alexandra Road

What TW9 is actually built of

Measured from 349 classified residential buildings in TW9, not from a description of the area.

Kew TW9 housing mix

Residential building form across the TW9 postcode district, from 349 classified buildings.

Attached on more than one side	47%
Attached on one side	42%
Detached	10%
Median building footprint	71 m²
Addresses per buildingAbove about 2 means flats and maisonettes dominate	1.67
Buildings classified	349

Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-08-17.

Side Return Extension Drawings for Kew (TW9) homes: the package and the process

A side return is a structural drawing as much as a planning one. Removing the original flank wall to open the kitchen into the infill needs a beam and a padstone detail, and the new roof has to be drawn where it meets both the existing rear elevation and the boundary wall.

The boundary is the sensitive line. The drawings set out where the new wall sits relative to it, how the roof drains without discharging next door, and where rooflights fall so the officer can see the room is lit without overlooking. That detail is also what your party wall surveyor will ask for.

The extension only exists where the alley does. Mid-terrace and end-of-terrace houses with a rear outrigger are the classic case; a semi with a flank path is a different scheme with different boundary questions; and a detached house has no side return to infill at all.

Do I need planning permission for a side return extension in London?

Permitted development rights for side extensions are narrower than for rear extensions: they generally cap the extension at a single storey, restrict its width to no more than half the width of the original house, and limit its height. In practice, a full-depth side return running the length of a Victorian or Edwardian terrace usually exceeds one or more of these limits, so most side return projects are drawn and submitted as a full householder planning application.

Conservation area status and Article 4 directions, common across inner London terraces, remove permitted development rights for side extensions entirely in many streets, reinforcing the need for a planning application. We check your property's status before drawing.

What does a side return extension involve?

A side return infills the alley at ground floor level, structurally opening the original flank wall of the kitchen into the new space so the two areas read as one room. Unlike a rear extension, which is bounded on three sides by your own garden, a side return is bounded on one long side by the neighbouring property, which shapes almost every decision in the design, from where the roof glazing sits to how deep the new foundations need to go.

New flank wall built out to align with the rear of the house, following the boundary line
Original external wall between kitchen and alley opened up and supported on a steel or glulam beam
Roof over the new space either glazed in full, glazed in a strip along the boundary for a 'light well' effect, or pitched and tiled to match the main roof
Kitchen re-planned across the combined footprint, often incorporating an island once the room widens

Will I need a Party Wall Agreement for a side return extension?

Almost certainly. Because the new side wall is built on or immediately against the boundary with the neighbouring property, the Party Wall etc. Act 1996 applies, and your neighbour must be formally notified before work starts. We prepare the drawings and dimensions your Party Wall surveyor needs, and time the notice period so it runs alongside, rather than after, your planning application.

Side return project options
Package	What it covers	Typical fee
Side return, planning only	Full householder planning application drawings for the infill	Full Planning pack ~£1,600–£2,400
Side return, planning + Building Regulations	Adds structural calculations, Party Wall drawings and construction detail	Planning + Building Regs pack ~£2,200–£3,850
Side return + rear extension (wraparound)	Combines both extensions into one L-shaped ground floor	see Wraparound Extension Drawings
Measured survey only	A measured existing floor-plan set for your own architect, surveyor or builder	from £450

Sheet from a side return extension drawings package drawn for a Kew property in TW9, showing the existing and proposed arrangement at scale — A sheet from the side return extension drawings package we submit to London Borough of Richmond upon Thames for Kew (TW9) properties.

Also in Kew TW9

Planning Permission Planning Drawings Architectural Drawings Building Regulations Drawings Loft Conversion Drawings Side Return Extension Drawings across Richmond Side Return Extension Drawings across London

FAQ

Side Return Extension Drawings in Kew TW9 — FAQs

How much does a side return extension cost to design in London?+

Side return drawings start from £1,400. The final fee depends on whether you commission planning drawings alone or a combined planning and building regulations package with structural calculations, all fixed and agreed upfront.

Can I build a side return under permitted development?+

Rarely for a full-width, full-depth side return. Permitted development for side extensions is limited on width and storeys, and most Victorian and Edwardian terraces sit in conservation areas that remove these rights anyway, so a full planning application is the usual route. We still check your specific property first, since some semi-detached and detached houses outside conservation areas retain more generous side-extension allowances.

When do I need to serve Party Wall notice on my neighbour?+

Before work starts, and ideally once your drawings and structural design are settled, since the notice needs accurate dimensions. We can prepare the supporting drawings alongside your planning application so both processes run in parallel.

Do I need an architect for a side return extension?+

No. DrawingsDirect is an MCIAT-chartered architectural technologist practice, so you get the same council-accepted drawings as an architect, for a fixed fee typically around 30% lower, with structural calculations produced in-house.

How long does a side return extension take to design and approve?+

Drawings are typically ready around 7 days from survey. A householder planning application then has a statutory 8-week determination period, running alongside your Party Wall notice period.

Do I need planning permission for an extension in Richmond?+

More often than in most boroughs, yes. Richmond has some of the most extensive Article 4 coverage in London, so permitted development cannot be assumed even for modest works — many conservation areas such as Richmond Green, Teddington and Kew Green require a full application. We confirm the exact designation for your address first and design accordingly rather than relying on permitted development.

My Richmond home is near the river — does flood risk affect my application?+

It can. Much of the borough lies within the Thames flood zone, and the council expects flood-risk considerations to be addressed for works near the river in Twickenham, Richmond and Hampton. We evidence flood-risk and finished-floor-level considerations within the application so the council can validate and approve without repeated revisions.

What does Richmond's Article 4 coverage mean in practice?+

Article 4 directions remove permitted development rights across many of Richmond's conservation areas, so alterations that would be automatic elsewhere — dormers, cladding, some rear works — need a full householder application here. We design context-led drawings that respond to the borough's period townscape and river frontage, which is what carries an application to consent in Richmond.

How long does Richmond Council take to decide?+

Richmond determines most householder applications within the statutory eight-week period once validated, though conservation and riverside cases can attract additional consultation. Because so much turns on design detail here, we prepare submissions to the validation checklist with the elevations and materials the council expects, to avoid drawing queries.

How much do planning drawings cost in Richmond?+

We agree a fixed fee before starting, typically around 30% below an architect's fee for the same council-accepted drawings, with free redraws until Richmond approves. Conservation and flood-zone cases require more evidence than a standard extension, so we quote once we understand your address and scheme rather than by the hour.

Free Fixed Quote

Get your free Kew planning assessment

Tell us your Kew (TW9) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.