MCIAT chartered drawings · Fixed fees across all 33 London boroughs

Free 2026 London Planning ReportHouse Extension Drawings in Kew TW9

Side-return extension to a Victorian terrace in Kew TW9, planning drawings for Richmond Council near Kew Gardens
Kew · TW9 · Richmond

House Extension Drawings in Kew TW9

Fixed-fee, MCIAT-chartered house extension drawings for Kew (TW9) homeowners — London Borough of Richmond upon Thames validation and local constraints handled from the start.

Free Kew planning assessment

Tell us your Kew (TW9) address and project. A fixed quote and free planning appraisal land within one working day.

No obligation · No spam · Reply within 1 working day

Kew (TW9) is largely Victorian and Edwardian terraces and villas with Georgian houses around Kew Green, so the common project is a side-return or full-width kitchen extension, a rear addition, or a loft conversion that keeps the historic street frontage unchanged.

With several conservation areas and the Royal Botanic Gardens World Heritage Site next door, we design additions that preserve the terrace rhythm, roofline and long views, and prepare the heritage and townscape justification Richmond Council expects for approval.

Side-return extension to a Victorian terrace in Kew TW9, planning drawings for Richmond Council near Kew Gardens
Isometric illustration of a Kew TW9 home house extension drawings design
Proposed floor plan
Kew TW9

Planning in Kew (TW9): what to know before you apply

No published householder Article 4 direction, but Kew's conservation areas and the adjacent Royal Botanic Gardens World Heritage Site mean strict control of materials, rooflines and protected views; rear extension depth is governed by neighbour amenity and terrace character.

Typical Kew housing stock

Victorian and Edwardian terraces and semi-detached villas make up most of Kew, with fine Georgian houses fronting Kew Green and characterful Edwardian terraces such as Lawn Crescent. Rear gardens suit side-return and full-width kitchen extensions, while lofts add space without altering the frontage.

Streets we regularly draw for in Kew

Lawn Crescent · Leyborne Park · Gainsborough Road · Alexandra Road

What TW9 is actually built of

Measured from 349 classified residential buildings in TW9, not from a description of the area.

Kew TW9 housing mix

Residential building form across the TW9 postcode district, from 349 classified buildings.

Attached on more than one side47%
Attached on one side42%
Detached10%
Median building footprint71 m²
Addresses per buildingAbove about 2 means flats and maisonettes dominate1.67
Buildings classified349

Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-08-17.

House Extension Drawings for Kew (TW9) homes: the package and the process

Extension drawings are read for their dimensions. The proposed plan needs depth measured from the original rear wall — not from a previous extension — eaves and ridge heights taken from existing ground level, and the distance to each boundary marked. A site plan showing how much garden remains is what an officer reaches for when the amenity question comes up.

We draw the existing building accurately first, because everything else is measured from it. Where the original footprint has already been added to, that history goes on the drawing: it decides which allowances are still available and it is the first thing an officer checks against the council's own records.

The plot decides the extension type long before taste does. A mid-terrace has depth to work with and an alley if it is lucky; a semi has one clear flank; a detached house can go wide. Reading the building form first is what stops a design being drawn that the plot cannot take.

Which extension types do you draw?

Every London extension is shaped by the plot, the neighbours and the borough's design guidance. We draw them all.

Rear extension

A single-storey rear extension is often permitted development within depth limits — ideal for an open-plan kitchen-diner.

Side-return

Fills the alley beside a Victorian terrace, widening the ground floor without losing garden.

Wraparound

Combines a rear and side-return extension for a transformative ground floor, usually needing planning permission.

Double-storey

Adds space above and below, subject to tighter scale and neighbour-impact scrutiny.

Basement

Creates space downward where footprint is limited, with structural and party-wall care.

Do I need planning permission for a house extension in London?

Single-storey rear extensions within permitted development limits (up to 6m for terraced/semi-detached homes under the larger-home scheme, subject to neighbour consultation) may not need a full application. Wraparounds, double-storeys and anything in a conservation area usually do. We assess your plot and recommend the right route before drawing. The current depth, height and eaves limits are set out in full in the guide to planning permission for a rear extension, and where you would rather one practice ran the design, the application and the building-regulations stage together, Architectural Drawings covers that full scope.

How do you maximise the footprint the council will approve?

We know each borough's depth, height and daylight standards, so we design to the edge of what will be approved rather than guessing — and we check the 45-degree neighbour daylight rule and any rear building line before submission. Where a plot is tight we test a permitted-development scheme against a slightly larger householder application and show you the trade-off in space, cost and timescale, so the drawn scheme is the one that actually maximises value rather than just floor area.

Typical London extension drawing packages
ExtensionTypical routePackageFee from
Single-storey rearPermitted development / householderPlanning + building regs£1,100
Side-returnHouseholder planningPlanning + building regs + structural£1,600
WraparoundHouseholder planningFull package + structural£2,200
Double-storeyHouseholder planningFull package + structural£2,400
Sheet from a house extension drawings package drawn for a Kew property in TW9, showing the existing and proposed arrangement at scale
A sheet from the house extension drawings package we submit to London Borough of Richmond upon Thames for Kew (TW9) properties.
FAQ

House Extension Drawings in Kew TW9 — FAQs

How far can I extend without planning permission in London?+
Under permitted development, single-storey rear extensions can reach 3m (terraced/semi) or 4m (detached), or up to 6–8m under the prior-approval larger-home scheme — but conservation areas and Article 4 directions can remove these rights. We check your property first.
Do extension drawings include structural calculations?+
Our full package includes structural drawings and calculations coordinated in-house, so your builder can price and build without waiting on an engineer.
How long do extension drawings take?+
Typically about 7 days from survey to a full drawing set delivered to your online portal.
Will my rear extension need a party wall agreement?+
If you build up to or on a shared boundary, excavate near a neighbour's foundations, or cut into a party wall for a steel, the Party Wall etc. Act 1996 usually applies. Our drawings show the works clearly so a party wall surveyor — or your neighbour — can see exactly what is proposed, which keeps that process quick.
Can I extend a house in a conservation area?+
Yes, but conservation areas and Article 4 directions commonly remove permitted development for rear and side extensions, so the work needs a full householder application designed to the council's heritage guidance. We confirm your property's designation before recommending a route.
Do I need planning permission for an extension in Richmond?+
More often than in most boroughs, yes. Richmond has some of the most extensive Article 4 coverage in London, so permitted development cannot be assumed even for modest works — many conservation areas such as Richmond Green, Teddington and Kew Green require a full application. We confirm the exact designation for your address first and design accordingly rather than relying on permitted development.
My Richmond home is near the river — does flood risk affect my application?+
It can. Much of the borough lies within the Thames flood zone, and the council expects flood-risk considerations to be addressed for works near the river in Twickenham, Richmond and Hampton. We evidence flood-risk and finished-floor-level considerations within the application so the council can validate and approve without repeated revisions.
What does Richmond's Article 4 coverage mean in practice?+
Article 4 directions remove permitted development rights across many of Richmond's conservation areas, so alterations that would be automatic elsewhere — dormers, cladding, some rear works — need a full householder application here. We design context-led drawings that respond to the borough's period townscape and river frontage, which is what carries an application to consent in Richmond.
How long does Richmond Council take to decide?+
Richmond determines most householder applications within the statutory eight-week period once validated, though conservation and riverside cases can attract additional consultation. Because so much turns on design detail here, we prepare submissions to the validation checklist with the elevations and materials the council expects, to avoid drawing queries.
How much do planning drawings cost in Richmond?+
We agree a fixed fee before starting, typically around 30% below an architect's fee for the same council-accepted drawings, with free redraws until Richmond approves. Conservation and flood-zone cases require more evidence than a standard extension, so we quote once we understand your address and scheme rather than by the hour.
Free Fixed Quote

Get your free Kew planning assessment

Tell us your Kew (TW9) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.