Side Return Extension Drawings in Collier Row RM5
Fixed-fee, MCIAT-chartered side return extension drawings for Collier Row (RM5) homeowners — London Borough of Havering validation and local constraints handled from the start.
Collier Row (RM5) took shape as an interwar suburb of Romford, expanding through the 1920s and 1930s across former Essex farmland. It is a planned residential district rather than a historic village core, with predominantly semi-detached housing, so almost every householder project here is an extension or loft on one of those consistent interwar pairs.
There is no conservation area covering Collier Row — that is a genuine, verified fact, not an omission. Its planning character is instead shaped by the uniformity of its interwar suburban roads and by the London Borough of Havering's householder design expectations, which favour keeping the semi-detached rhythm, the gaps between pairs and the original materials intact. We treat that suburban cohesion, rather than a conservation designation, as the reference point when we design an extension.
Demand for rear extensions, two-storey side extensions and hip-to-gable lofts is steady across roads like Mawney Road, Silvermere Avenue and Victoria Avenue, where regular plots and gardens are typical. We check each property's permitted-development position against Havering's borough-wide controls first, then prepare drawings that either stay within permitted development or are ready to validate as a full householder application.
Planning in Collier Row (RM5): what to know before you apply
Because Collier Row's suburban roads repeat so consistently, Havering assess extensions against the established semi-detached pattern, so matching original brick, render and roof form and preserving the gap between pairs matters more than on a mixed-typology road. There is no conservation area and no local Article 4 direction, so many houses retain permitted development rights for rear and loft work — but the finite gardens and shared building lines mean depth, height and neighbour impact are the points a householder application is judged on.
Typical Collier Row housing stock
Predominantly interwar semi-detached houses on planned suburban roads, with postwar and modern infill on regular gardened plots. The consistent pairs and generous front and rear gardens are what makes rear extensions, side extensions and hip-to-gable loft conversions the common projects here.
Streets we regularly draw for in Collier Row
Collier Row Road · Lodge Lane · White Hart Lane · Clockhouse Lane · Mawney Road · Lawns Way · Mashiters Hill · Carter Drive · Ravenswood Close · Hunter's Grove · Silvermere Avenue · Victoria Avenue
What RM5 is actually built of
Measured from 275 classified residential buildings in RM5, not from a description of the area.
Collier Row RM5 housing mix
Residential building form across the RM5 postcode district, from 275 classified buildings.
| Attached on more than one side | 33% |
|---|---|
| Attached on one side | 59% |
| Detached | 7% |
| Median building footprint | 61 m² |
| Addresses per buildingAbove about 2 means flats and maisonettes dominate | 1.08 |
| Buildings classified | 275 |
Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-08-17.
Side Return Extension Drawings for Collier Row (RM5) homes: the package and the process
A side return is a structural drawing as much as a planning one. Removing the original flank wall to open the kitchen into the infill needs a beam and a padstone detail, and the new roof has to be drawn where it meets both the existing rear elevation and the boundary wall.
The boundary is the sensitive line. The drawings set out where the new wall sits relative to it, how the roof drains without discharging next door, and where rooflights fall so the officer can see the room is lit without overlooking. That detail is also what your party wall surveyor will ask for.
The extension only exists where the alley does. Mid-terrace and end-of-terrace houses with a rear outrigger are the classic case; a semi with a flank path is a different scheme with different boundary questions; and a detached house has no side return to infill at all.
Do I need planning permission for a side return extension in London?
Permitted development rights for side extensions are narrower than for rear extensions: they generally cap the extension at a single storey, restrict its width to no more than half the width of the original house, and limit its height. In practice, a full-depth side return running the length of a Victorian or Edwardian terrace usually exceeds one or more of these limits, so most side return projects are drawn and submitted as a full householder planning application.
Conservation area status and Article 4 directions, common across inner London terraces, remove permitted development rights for side extensions entirely in many streets, reinforcing the need for a planning application. We check your property's status before drawing.
What does a side return extension involve?
A side return infills the alley at ground floor level, structurally opening the original flank wall of the kitchen into the new space so the two areas read as one room. Unlike a rear extension, which is bounded on three sides by your own garden, a side return is bounded on one long side by the neighbouring property, which shapes almost every decision in the design, from where the roof glazing sits to how deep the new foundations need to go.
- New flank wall built out to align with the rear of the house, following the boundary line
- Original external wall between kitchen and alley opened up and supported on a steel or glulam beam
- Roof over the new space either glazed in full, glazed in a strip along the boundary for a 'light well' effect, or pitched and tiled to match the main roof
- Kitchen re-planned across the combined footprint, often incorporating an island once the room widens
Will I need a Party Wall Agreement for a side return extension?
Almost certainly. Because the new side wall is built on or immediately against the boundary with the neighbouring property, the Party Wall etc. Act 1996 applies, and your neighbour must be formally notified before work starts. We prepare the drawings and dimensions your Party Wall surveyor needs, and time the notice period so it runs alongside, rather than after, your planning application.
| Package | What it covers | Typical fee |
|---|---|---|
| Side return, planning only | Full householder planning application drawings for the infill | Full Planning pack ~£1,600–£2,400 |
| Side return, planning + Building Regulations | Adds structural calculations, Party Wall drawings and construction detail | Planning + Building Regs pack ~£2,200–£3,850 |
| Side return + rear extension (wraparound) | Combines both extensions into one L-shaped ground floor | see Wraparound Extension Drawings |
| Measured survey only | A measured existing floor-plan set for your own architect, surveyor or builder | from £450 |
Side Return Extension Drawings in Collier Row RM5 — FAQs
How much does a side return extension cost to design in London?+
Can I build a side return under permitted development?+
When do I need to serve Party Wall notice on my neighbour?+
Do I need an architect for a side return extension?+
How long does a side return extension take to design and approve?+
Do I need planning permission to extend a house in Collier Row?+
Is Collier Row in a conservation area?+
How much do planning and building-regulation drawings cost for a Collier Row extension?+
How long does Havering Council take to decide?+
Get your free Collier Row planning assessment
Tell us your Collier Row (RM5) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.