Planning Permission in Collier Row RM5
Fixed-fee, MCIAT-chartered planning permission for Collier Row (RM5) homeowners — London Borough of Havering validation and local constraints handled from the start.
Collier Row (RM5) took shape as an interwar suburb of Romford, expanding through the 1920s and 1930s across former Essex farmland. It is a planned residential district rather than a historic village core, with predominantly semi-detached housing, so almost every householder project here is an extension or loft on one of those consistent interwar pairs.
There is no conservation area covering Collier Row — that is a genuine, verified fact, not an omission. Its planning character is instead shaped by the uniformity of its interwar suburban roads and by the London Borough of Havering's householder design expectations, which favour keeping the semi-detached rhythm, the gaps between pairs and the original materials intact. We treat that suburban cohesion, rather than a conservation designation, as the reference point when we design an extension.
Demand for rear extensions, two-storey side extensions and hip-to-gable lofts is steady across roads like Mawney Road, Silvermere Avenue and Victoria Avenue, where regular plots and gardens are typical. We check each property's permitted-development position against Havering's borough-wide controls first, then prepare drawings that either stay within permitted development or are ready to validate as a full householder application.
Planning in Collier Row (RM5): what to know before you apply
Because Collier Row's suburban roads repeat so consistently, Havering assess extensions against the established semi-detached pattern, so matching original brick, render and roof form and preserving the gap between pairs matters more than on a mixed-typology road. There is no conservation area and no local Article 4 direction, so many houses retain permitted development rights for rear and loft work — but the finite gardens and shared building lines mean depth, height and neighbour impact are the points a householder application is judged on.
Typical Collier Row housing stock
Predominantly interwar semi-detached houses on planned suburban roads, with postwar and modern infill on regular gardened plots. The consistent pairs and generous front and rear gardens are what makes rear extensions, side extensions and hip-to-gable loft conversions the common projects here.
Streets we regularly draw for in Collier Row
Collier Row Road · Lodge Lane · White Hart Lane · Clockhouse Lane · Mawney Road · Lawns Way · Mashiters Hill · Carter Drive · Ravenswood Close · Hunter's Grove · Silvermere Avenue · Victoria Avenue
What RM5 is actually built of
Measured from 275 classified residential buildings in RM5, not from a description of the area.
Collier Row RM5 housing mix
Residential building form across the RM5 postcode district, from 275 classified buildings.
| Attached on more than one side | 33% |
|---|---|
| Attached on one side | 59% |
| Detached | 7% |
| Median building footprint | 61 m² |
| Addresses per buildingAbove about 2 means flats and maisonettes dominate | 1.08 |
| Buildings classified | 275 |
Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-08-17.
Planning Permission for Collier Row (RM5) homes: the package and the process
A householder application is refused validation far more often than it is refused permission, and almost always for the same reasons: a location plan at the wrong scale, no red line around the application site, a missing ownership certificate, or elevations that do not show every face of the building affected. We prepare the full submission set — location plan, block plan, existing and proposed floor plans, elevations and sections — so the case officer receives a complete case on day one.
Once the application is live we stay on it. Officers routinely come back with questions about materials, boundary treatment or a dimension they cannot read off the drawings, and a fast, drawn answer is usually the difference between a decision inside the statutory period and a request to withdraw and resubmit.
Which route applies is decided by the building before it is decided by policy. A house that has never been extended usually has allowances left to use; a flat, a listed building or a home in a conservation area often has none, and the same drawing set then has to make a design case rather than a compliance one.
Do I need planning permission for an extension in London?
Many single-storey rear extensions, loft conversions and outbuildings fall under permitted development rights and do not need a full planning application — but London's dense housing stock, conservation areas and Article 4 directions frequently withdraw those rights. Before you pay for a full application, we check your property against the current permitted development thresholds and your borough's local constraints.
Where permitted development applies, we recommend a Lawful Development Certificate instead of full planning — it is faster, cheaper and gives you a legal document confirming the work was lawful. Where a full application is genuinely required, we prepare it properly the first time.
Permitted development vs a full planning application
Permitted development lets you build within defined volumetric limits without committee review. A full householder application is assessed against the borough's local plan for scale, daylight, neighbour impact and design. We advise which route your project qualifies for and why.
Article 4 directions and conservation areas
If your home sits in a conservation area or under an Article 4 direction, permitted development rights are often removed — meaning even modest changes need consent. Each borough page lists the local directions and conservation areas we routinely design around.
How do you apply for planning permission through the London Planning Portal?
We manage the full lifecycle of your submission — survey, drawings, supporting documents and officer liaison — so you never have to decode a validation checklist yourself.
Phase 1 — existing and proposed site surveys
A laser-measured survey captures your property exactly, so existing and proposed drawings match reality millimetre for millimetre.
Phase 2 — technical drawing package
Site location plan, block plan, floor plans, elevations and sections drawn to your borough's scale and formatting requirements, with a design and access statement where needed.
Phase 3 — liaison with the planning officer
We answer the council's queries, negotiate amendments, and redraw free until the decision lands.
How long does planning permission take, and what does it cost?
Drawings are typically ready within 7 days of survey. Your council then has a statutory 8 weeks to decide a householder application. Our drawing fees are fixed and quoted upfront — the table below shows typical packages.
| Package | Production window | Compliance layer | Typical fee |
|---|---|---|---|
| Permitted Development pack | 7–10 working days | Lawful Development Certificate submission | £950–£1,450 |
| Full Planning pack | 10–14 working days | Council liaison & design statement | £1,600–£2,400 |
| Planning + Building Regs pack | 14–21 working days | Structural calculations included | £2,200–£3,850 |
Planning Permission in Collier Row RM5 — FAQs
How long does it take to get planning permission from a London council?+
What happens if the council refuses?+
Do you cover my borough?+
Is the fee really fixed?+
Do I need planning permission to extend a house in Collier Row?+
Is Collier Row in a conservation area?+
How much do planning and building-regulation drawings cost for a Collier Row extension?+
How long does Havering Council take to decide?+
Get your free Collier Row planning assessment
Tell us your Collier Row (RM5) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.