MCIAT chartered drawings · Fixed fees across all 33 London boroughs
[email protected]020 7864 7245WhatsApp

Free 2026 London Planning Report — Side Return Extension Drawings in Barking IG11

Kitchen extension interior in a Barking IG11 terraced home, Barking and Dagenham
Barking · IG11 · Barking & Dagenham

Side Return Extension Drawings in Barking IG11

Fixed-fee, MCIAT-chartered side return extension drawings for Barking (IG11) homeowners — London Borough of Barking and Dagenham validation and local constraints handled from the start.

Free Barking planning assessment

Tell us your Barking (IG11) address and project. A fixed quote and free planning appraisal land within one working day.

No obligation · No spam · Reply within 1 working day

Barking (IG11) mixes a medieval abbey-and-town-centre core with Victorian, Edwardian and interwar housing, so extension and loft work here depends heavily on how close a property sits to the historic centre and the river.

Two conservation areas — Abbey and Barking Town Centre and Abbey Road Riverside — plus the borough-wide 2022 Article 4 on upward extensions mean we check the boundary and Article 4 position before advising permitted development versus a full application.

Kitchen extension interior in a Barking IG11 terraced home, Barking and Dagenham
Isometric illustration of a Barking IG11 home side return extension drawings design
Proposed floor plan
Barking IG11

Planning in Barking (IG11): what to know before you apply

Rear extensions and loft conversions across suburban IG11 are often achievable, but the borough-wide 2022 Article 4 means any added-storey scheme needs planning permission, and properties inside the Abbey town-centre or Abbey Road Riverside conservation areas face tighter heritage control near the abbey and church.

Typical Barking housing stock

IG11 ranges from the historic Barking Abbey and town-centre core through Victorian and Edwardian terraces to interwar semis and later suburban housing spreading out from the town centre.

Streets we regularly draw for in Barking

Abbey Road · East Street · North Street · Linton Road

What IG11 is actually built of

Measured from 261 classified residential buildings in IG11, not from a description of the area.

Barking IG11 housing mix

Residential building form across the IG11 postcode district, from 261 classified buildings.

Attached on more than one side60%
Attached on one side38%
Detached2%
Median building footprint59 m²
Addresses per buildingAbove about 2 means flats and maisonettes dominate1.92
Buildings classified261

Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-08-17.

Side Return Extension Drawings for Barking (IG11) homes: the package and the process

A side return is a structural drawing as much as a planning one. Removing the original flank wall to open the kitchen into the infill needs a beam and a padstone detail, and the new roof has to be drawn where it meets both the existing rear elevation and the boundary wall.

The boundary is the sensitive line. The drawings set out where the new wall sits relative to it, how the roof drains without discharging next door, and where rooflights fall so the officer can see the room is lit without overlooking. That detail is also what your party wall surveyor will ask for.

The extension only exists where the alley does. Mid-terrace and end-of-terrace houses with a rear outrigger are the classic case; a semi with a flank path is a different scheme with different boundary questions; and a detached house has no side return to infill at all.

Do I need planning permission for a side return extension in London?

Permitted development rights for side extensions are narrower than for rear extensions: they generally cap the extension at a single storey, restrict its width to no more than half the width of the original house, and limit its height. In practice, a full-depth side return running the length of a Victorian or Edwardian terrace usually exceeds one or more of these limits, so most side return projects are drawn and submitted as a full householder planning application.

Conservation area status and Article 4 directions, common across inner London terraces, remove permitted development rights for side extensions entirely in many streets, reinforcing the need for a planning application. We check your property's status before drawing.

What does a side return extension involve?

A side return infills the alley at ground floor level, structurally opening the original flank wall of the kitchen into the new space so the two areas read as one room. Unlike a rear extension, which is bounded on three sides by your own garden, a side return is bounded on one long side by the neighbouring property, which shapes almost every decision in the design, from where the roof glazing sits to how deep the new foundations need to go.

  • New flank wall built out to align with the rear of the house, following the boundary line
  • Original external wall between kitchen and alley opened up and supported on a steel or glulam beam
  • Roof over the new space either glazed in full, glazed in a strip along the boundary for a 'light well' effect, or pitched and tiled to match the main roof
  • Kitchen re-planned across the combined footprint, often incorporating an island once the room widens

Will I need a Party Wall Agreement for a side return extension?

Almost certainly. Because the new side wall is built on or immediately against the boundary with the neighbouring property, the Party Wall etc. Act 1996 applies, and your neighbour must be formally notified before work starts. We prepare the drawings and dimensions your Party Wall surveyor needs, and time the notice period so it runs alongside, rather than after, your planning application.

Side return project options
PackageWhat it coversTypical fee
Side return, planning onlyFull householder planning application drawings for the infillFull Planning pack ~£1,600–£2,400
Side return, planning + Building RegulationsAdds structural calculations, Party Wall drawings and construction detailPlanning + Building Regs pack ~£2,200–£3,850
Side return + rear extension (wraparound)Combines both extensions into one L-shaped ground floorsee Wraparound Extension Drawings
Measured survey onlyA measured existing floor-plan set for your own architect, surveyor or builderfrom £450
Sheet from a side return extension drawings package drawn for a Barking property in IG11, showing the existing and proposed arrangement at scale
A sheet from the side return extension drawings package we submit to London Borough of Barking and Dagenham for Barking (IG11) properties.

Also in Barking IG11

Planning PermissionPlanning DrawingsArchitectural DrawingsBuilding Regulations DrawingsLoft Conversion DrawingsSide Return Extension Drawings across Barking & DagenhamSide Return Extension Drawings across London
FAQ

Side Return Extension Drawings in Barking IG11 — FAQs

How much does a side return extension cost to design in London?+
Side return drawings start from £1,400. The final fee depends on whether you commission planning drawings alone or a combined planning and building regulations package with structural calculations, all fixed and agreed upfront.
Can I build a side return under permitted development?+
Rarely for a full-width, full-depth side return. Permitted development for side extensions is limited on width and storeys, and most Victorian and Edwardian terraces sit in conservation areas that remove these rights anyway, so a full planning application is the usual route. We still check your specific property first, since some semi-detached and detached houses outside conservation areas retain more generous side-extension allowances.
When do I need to serve Party Wall notice on my neighbour?+
Before work starts, and ideally once your drawings and structural design are settled, since the notice needs accurate dimensions. We can prepare the supporting drawings alongside your planning application so both processes run in parallel.
Do I need an architect for a side return extension?+
No. DrawingsDirect is an MCIAT-chartered architectural technologist practice, so you get the same council-accepted drawings as an architect, for a fixed fee typically around 30% lower, with structural calculations produced in-house.
How long does a side return extension take to design and approve?+
Drawings are typically ready around 7 days from survey. A householder planning application then has a statutory 8-week determination period, running alongside your Party Wall notice period.
Do I need planning permission for an extension in Barking & Dagenham?+
On the Becontree Estate's interwar semis and the Victorian terraces around Barking, many single-storey rear extensions and lofts can fall within permitted development, so a full application isn't always needed. Conservation areas such as Barking Town Centre and Chadwell Heath restrict this. We check your address first and can confirm permitted development with a Lawful Development Certificate where it qualifies.
What does the council expect for an extension on the Becontree Estate?+
The Becontree Estate has a consistent interwar cottage-style character the council expects extensions to respect — matching the building line, roof form and materials of the street. We design to that established pattern rather than imposing a standard template, which is what carries applications to consent on the estate.
What does the borough-wide HMO Article 4 direction affect?+
Barking & Dagenham applies a borough-wide Article 4 direction removing permitted development rights for change of use to an HMO (C3 to C4), so a conversion to a house in multiple occupation needs a full application anywhere in the borough. It doesn't affect a standard family extension or loft, but we confirm whether it applies to your intended use before advising.
How long does Barking & Dagenham Council take to decide?+
The council determines most householder applications within the statutory eight-week period once validated; conservation cases can attract additional consultation. The commonest delay is a validation query, so we prepare submissions to the council's checklist with correctly scaled existing and proposed drawings and a location plan.
How much do planning drawings cost in Barking & Dagenham?+
We agree a fixed fee before starting, usually around 30% below an architect's fee for the same council-accepted drawings, with free redraws until the council approves. A single-storey rear, a loft and a conservation-area application differ in complexity, so we quote once we understand your street and project rather than by the hour.
Free Fixed Quote

Get your free Barking planning assessment

Tell us your Barking (IG11) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.