Planning Drawings in Barking IG11
Fixed-fee, MCIAT-chartered planning drawings for Barking (IG11) homeowners — London Borough of Barking and Dagenham validation and local constraints handled from the start.
Barking (IG11) mixes a medieval abbey-and-town-centre core with Victorian, Edwardian and interwar housing, so extension and loft work here depends heavily on how close a property sits to the historic centre and the river.
Two conservation areas — Abbey and Barking Town Centre and Abbey Road Riverside — plus the borough-wide 2022 Article 4 on upward extensions mean we check the boundary and Article 4 position before advising permitted development versus a full application.
Planning in Barking (IG11): what to know before you apply
Rear extensions and loft conversions across suburban IG11 are often achievable, but the borough-wide 2022 Article 4 means any added-storey scheme needs planning permission, and properties inside the Abbey town-centre or Abbey Road Riverside conservation areas face tighter heritage control near the abbey and church.
Typical Barking housing stock
IG11 ranges from the historic Barking Abbey and town-centre core through Victorian and Edwardian terraces to interwar semis and later suburban housing spreading out from the town centre.
Streets we regularly draw for in Barking
Abbey Road · East Street · North Street · Linton Road
What IG11 is actually built of
Measured from 261 classified residential buildings in IG11, not from a description of the area.
Barking IG11 housing mix
Residential building form across the IG11 postcode district, from 261 classified buildings.
| Attached on more than one side | 60% |
|---|---|
| Attached on one side | 38% |
| Detached | 2% |
| Median building footprint | 59 m² |
| Addresses per buildingAbove about 2 means flats and maisonettes dominate | 1.92 |
| Buildings classified | 261 |
Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-08-17.
Planning Drawings for Barking (IG11) homes: the package and the process
A planning set is judged as a set, not as individual sheets. Every existing drawing needs its proposed counterpart at the same scale and orientation so the officer can read the change at a glance, each sheet needs its own number, title, scale bar and north point, and the whole package needs to survive being printed at A3 without a dimension becoming illegible.
We draw to the conventions validation teams expect: plans and elevations at 1:100 or 1:50, a location plan at 1:1250 with the site edged red, a block plan at 1:500, and sections cut where the change in level or roof form actually happens rather than where they are easiest to draw.
The drawing list itself changes with the building. A detached house needs four elevations; a mid-terrace needs two plus a section through the party walls to show what is not visible from outside. Getting that list right at the start is what stops a validation officer asking for a sheet three weeks in.
What is included in a planning drawing set?
A council will only validate an application that contains the right drawings at the right scale. Our standard planning set covers everything a London validation team expects.
- Site location plan (1:1250) and block plan (1:500)
- Existing floor plans, elevations and sections
- Proposed floor plans, elevations and sections
- Roof plans where relevant, with heights and materials annotated
- A design and access or heritage statement where the borough requires one
How are planning drawings different from building regulations drawings?
Planning drawings show what the building will look like and how it sits in its context. Building regulations drawings show how it will be built safely — structure, insulation, fire escape and drainage. Most projects need both; our Complete package covers the two together with structural calculations coordinated in-house.
How quickly can you produce planning drawings in London?
After a laser survey, a standard householder set is typically ready within 7 days. We review every drawing against your borough's validation checklist before it reaches a planner's desk, which is why our first-time approval rate sits around 96%.
| Drawing | Typical scale | What it shows |
|---|---|---|
| Site location plan | 1:1250 | The property in its street context, site edged red |
| Block plan | 1:500 | The building's footprint and position in the plot |
| Floor plans (existing & proposed) | 1:100 / 1:50 | Room layout, walls, openings and the proposed changes |
| Elevations (existing & proposed) | 1:100 / 1:50 | Each face of the building and how it changes |
| Sections | 1:100 / 1:50 | A cut through showing heights, levels and roof form |
Planning Drawings in Barking IG11 — FAQs
What scale should London planning drawings be?+
Do I need an architect to produce planning drawings?+
How many revisions are included in the fee?+
Can you draw from my existing plans?+
Do planning drawings guarantee approval?+
Do I need planning permission for an extension in Barking & Dagenham?+
What does the council expect for an extension on the Becontree Estate?+
What does the borough-wide HMO Article 4 direction affect?+
How long does Barking & Dagenham Council take to decide?+
How much do planning drawings cost in Barking & Dagenham?+
Get your free Barking planning assessment
Tell us your Barking (IG11) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.