MCIAT chartered drawings · Fixed fees across all 33 London boroughs
[email protected]020 7864 7245WhatsApp

Free 2026 London Planning Report — Rear Extension Drawings in Bromley BR1

Rear extension behind a detached Edwardian villa in Bickley, Bromley BR1, London Borough of Bromley
Bromley · BR1 · Bromley

Rear Extension Drawings in Bromley BR1

Fixed-fee, MCIAT-chartered rear extension drawings for Bromley (BR1) homeowners — London Borough of Bromley validation and local constraints handled from the start.

Free Bromley planning assessment

Tell us your Bromley (BR1) address and project. A fixed quote and free planning appraisal land within one working day.

No obligation · No spam · Reply within 1 working day

Bromley (BR1) runs from the pedestrianised Market Square and High Street of the town centre out to the large detached villas of Bickley, mixing a busy commercial core with leafy Edwardian avenues. Rear extensions and loft conversions on the villa streets are the mainstay of our work here.

The Bromley Town Centre conservation area, designated in 1985, controls the historic Market Square end of the High Street, while the Sundridge Avenue and Mavelstone Road conservation areas towards Bickley protect wide-plot villas and their garden settings. We check a BR1 address against these before drawing to Bromley's residential guidance.

Rear extension behind a detached Edwardian villa in Bickley, Bromley BR1, London Borough of Bromley
Isometric illustration of a Bromley BR1 home rear extension drawings design
Proposed floor plan
Bromley BR1

Planning in Bromley (BR1): what to know before you apply

BR1 carries no householder Article 4 direction — the borough's one such direction sits over the Chancery Lane conservation area in Beckenham (BR3) — so many Bromley houses keep permitted development rights for rear and loft work. But the Bromley Town Centre, Sundridge Avenue and Mavelstone Road conservation areas tighten control over frontages, rooflines and materials, and work to the large Bickley villas draws close design scrutiny, so we confirm the conservation-area position on the council's map first.

Typical Bromley housing stock

Large detached and semi-detached Edwardian villas on the leafy Bickley avenues, tighter Victorian terraces nearer the station, and the mixed commercial fabric around the pedestrianised Market Square and High Street of the town centre.

Streets we regularly draw for in Bromley

Market Square · Sundridge Avenue · Mavelstone Road · Page Heath Lane · Widmore Road

What BR1 is actually built of

Measured from 437 classified residential buildings in BR1, not from a description of the area.

Bromley BR1 housing mix

Residential building form across the BR1 postcode district, from 437 classified buildings.

Attached on more than one side44%
Attached on one side43%
Detached13%
Median building footprint55 m²
Addresses per buildingAbove about 2 means flats and maisonettes dominate1.36
Buildings classified437

Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-08-17.

Rear Extension Drawings for Bromley (BR1) homes: the package and the process

Depth is the number the application turns on, and it has to be measured from the original rear wall of the house rather than from whatever is there now. The drawings carry that dimension, the eaves and ridge heights, the position of any rooflight, and the boundary distances on both sides.

Where the scheme goes beyond the standard allowance and relies on the larger home extension route, the drawings serve a second purpose: they are what the council sends to the neighbours during the consultation. A clear, dimensioned proposed elevation answers the objection about overshadowing before it is made.

Depth is limited by the plot as much as by the rules. A long garden behind a terrace can take the full allowance, while a short one runs out before the rules do — and on a semi or detached house the same depth reads very differently from the boundary.

Do I need planning permission for a rear extension in London?

Many single-storey rear extensions qualify as permitted development, meaning no planning application is needed, provided depth, height and materials stay within set limits. That changes if your property sits in a conservation area or is subject to an Article 4 direction, both of which can remove permitted development rights across a street or borough — in that case a full householder planning application is required regardless of size.

Even where an extension qualifies, most homeowners obtain a Lawful Development Certificate to confirm that status in writing before building — useful for mortgage lenders, buyers and Building Control. We check your property against your borough's constraints before recommending a route.

How deep can a single-storey rear extension go?

Depth is the main constraint on a rear extension, and it depends on your house type and whether you use standard permitted development or the larger home extension scheme.

Permitted development

Standard permitted development allows a single-storey rear extension up to 3 metres deep for terraced and semi-detached houses, or 4 metres for detached houses, generally with eaves height limited to match or stay close to the existing house.

Larger home extension scheme

The prior-approval scheme extends this to 6 metres for terraced and semi-detached houses and 8 metres for detached houses. Your council writes to affected neighbours; if none object within the notification period, approval follows without a full planning application. If an objection is raised, the council assesses the impact on neighbouring light and outlook itself, rather than automatically refusing, so a well-considered design still has a good chance of approval.

Designing the kitchen-diner: rooflights, bi-folds and daylight

Most rear extensions exist to create one open-plan kitchen, dining and living space, so the drawing work focuses on getting light and flow right within the depth you are allowed.

  • Structural opening sized for bi-fold or sliding doors across most of the rear elevation
  • Rooflights or a roof lantern positioned to light the centre of the room, away from the shadow line of the main house
  • Open-plan layout tested against the 45-degree rule, which protects daylight to your neighbours' windows and can limit how close a flank wall or roof comes to the boundary
  • Floor build-up and threshold detail coordinated so the new floor meets the existing one without a step
Rear extension routes at a glance
RouteWhen it appliesTypical fee
Permitted development (Lawful Development Certificate)Depth within 3m (terraced/semi) or 4m (detached), height and materials within PD limitsPD/LDC pack ~£950–£1,450
Larger home extension (prior approval)Depth up to 6m (terraced/semi) or 8m (detached), with neighbour notificationfrom £1,100
Full householder planning permissionExtension exceeds PD/larger-home limits, or the property is in a conservation area with an Article 4 directionFull Planning pack ~£1,600–£2,400
Planning + Building Regulations (structural)Combined planning and construction-ready pack with structural calculations for the opening and roofPlanning + Building Regs pack ~£2,200–£3,850
Sheet from a rear extension drawings package drawn for a Bromley property in BR1, showing the existing and proposed arrangement at scale
A sheet from the rear extension drawings package we submit to London Borough of Bromley for Bromley (BR1) properties.

Also in Bromley BR1

Planning PermissionPlanning DrawingsArchitectural DrawingsBuilding Regulations DrawingsLoft Conversion DrawingsRear Extension Drawings across BromleyRear Extension Drawings across London
FAQ

Rear Extension Drawings in Bromley BR1 — FAQs

How much does a rear extension cost to design in London?+
Rear extension drawings start from £1,100, with the final fee set by the route your extension takes — permitted development, prior approval or full planning — and whether you need building regulations and structural calculations bundled in. The fee is fixed and agreed upfront.
Do I need an architect for a rear extension?+
No. DrawingsDirect is an MCIAT-chartered architectural technologist practice, producing the same council-accepted drawings as an architect for a fixed fee typically around 30% lower.
How long does it take to get rear extension drawings?+
Drawings are typically ready around 7 days from survey. Once submitted, councils have a statutory 8-week period to determine a standard householder planning application.
What is the 45-degree rule?+
It is a daylight test many London councils apply to check that a rear extension does not block too much light to a neighbour's nearest window, measured as a line drawn at 45 degrees from that window. We check it before submission, not after a refusal.
Will I need a Party Wall Agreement for a rear extension?+
Only if your foundations or new walls sit on or near the boundary with a neighbouring property. A straightforward rear extension set within your own plot often does not trigger the Party Wall etc. Act 1996, unlike a Side Return or Wraparound extension, which usually does.
Do I need planning permission for an extension in Bromley?+
Bromley has no borough-wide Article 4 direction affecting typical householder permitted development, so its detached and semi-detached homes often keep fuller rights than inner-London terraces — larger rear and single-storey extensions can qualify. The binding constraints are green-belt policy on outer properties and conservation control in Chislehurst, Keston and Bromley Town. We check both and can confirm permitted development with a Lawful Development Certificate.
Can I build a bigger extension because Bromley plots are larger?+
Often, yes. Bromley's generous interwar plots make substantial rear and double-storey extensions viable where an inner-London terrace could not accommodate them. The limit is usually policy rather than space — green belt restricts scale on outer properties, and conservation areas control design. We design to use the plot fully within those limits, checking permitted-development allowances for detached homes first.
How does green-belt designation affect my Bromley project?+
On green-belt properties toward Orpington, Chislehurst and the borough's edges, extensions are assessed against strict limits on disproportionate additions to the original dwelling. It does not rule out an extension, but scale and siting matter and the case must be evidenced carefully. We confirm whether your property is green belt and design a scheme that stays within policy.
How long does Bromley Council take to decide?+
Bromley determines most householder applications within the statutory eight-week period once validated. As London's largest borough by area, its casework spans suburban semis to green-belt properties, so a complete, correctly scaled submission is the best way to avoid a validation query and keep to that timescale.
How much do planning drawings cost in Bromley?+
We quote a fixed fee upfront, typically around 30% below an architect's charge for the same council-accepted drawings, with free redraws until Bromley approves. Because plots here allow larger schemes, the fee tracks the project's complexity — a single-storey rear differs from a double-storey or a green-belt case — and we confirm it once we understand your plans.
Free Fixed Quote

Get your free Bromley planning assessment

Tell us your Bromley (BR1) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.