Planning Drawings in Bromley BR1
Fixed-fee, MCIAT-chartered planning drawings for Bromley (BR1) homeowners — London Borough of Bromley validation and local constraints handled from the start.
Bromley (BR1) runs from the pedestrianised Market Square and High Street of the town centre out to the large detached villas of Bickley, mixing a busy commercial core with leafy Edwardian avenues. Rear extensions and loft conversions on the villa streets are the mainstay of our work here.
The Bromley Town Centre conservation area, designated in 1985, controls the historic Market Square end of the High Street, while the Sundridge Avenue and Mavelstone Road conservation areas towards Bickley protect wide-plot villas and their garden settings. We check a BR1 address against these before drawing to Bromley's residential guidance.
Planning in Bromley (BR1): what to know before you apply
BR1 carries no householder Article 4 direction — the borough's one such direction sits over the Chancery Lane conservation area in Beckenham (BR3) — so many Bromley houses keep permitted development rights for rear and loft work. But the Bromley Town Centre, Sundridge Avenue and Mavelstone Road conservation areas tighten control over frontages, rooflines and materials, and work to the large Bickley villas draws close design scrutiny, so we confirm the conservation-area position on the council's map first.
Typical Bromley housing stock
Large detached and semi-detached Edwardian villas on the leafy Bickley avenues, tighter Victorian terraces nearer the station, and the mixed commercial fabric around the pedestrianised Market Square and High Street of the town centre.
Streets we regularly draw for in Bromley
Market Square · Sundridge Avenue · Mavelstone Road · Page Heath Lane · Widmore Road
What BR1 is actually built of
Measured from 437 classified residential buildings in BR1, not from a description of the area.
Bromley BR1 housing mix
Residential building form across the BR1 postcode district, from 437 classified buildings.
| Attached on more than one side | 44% |
|---|---|
| Attached on one side | 43% |
| Detached | 13% |
| Median building footprint | 55 m² |
| Addresses per buildingAbove about 2 means flats and maisonettes dominate | 1.36 |
| Buildings classified | 437 |
Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-08-17.
Planning Drawings for Bromley (BR1) homes: the package and the process
A planning set is judged as a set, not as individual sheets. Every existing drawing needs its proposed counterpart at the same scale and orientation so the officer can read the change at a glance, each sheet needs its own number, title, scale bar and north point, and the whole package needs to survive being printed at A3 without a dimension becoming illegible.
We draw to the conventions validation teams expect: plans and elevations at 1:100 or 1:50, a location plan at 1:1250 with the site edged red, a block plan at 1:500, and sections cut where the change in level or roof form actually happens rather than where they are easiest to draw.
The drawing list itself changes with the building. A detached house needs four elevations; a mid-terrace needs two plus a section through the party walls to show what is not visible from outside. Getting that list right at the start is what stops a validation officer asking for a sheet three weeks in.
What is included in a planning drawing set?
A council will only validate an application that contains the right drawings at the right scale. Our standard planning set covers everything a London validation team expects.
- Site location plan (1:1250) and block plan (1:500)
- Existing floor plans, elevations and sections
- Proposed floor plans, elevations and sections
- Roof plans where relevant, with heights and materials annotated
- A design and access or heritage statement where the borough requires one
How are planning drawings different from building regulations drawings?
Planning drawings show what the building will look like and how it sits in its context. Building regulations drawings show how it will be built safely — structure, insulation, fire escape and drainage. Most projects need both; our Complete package covers the two together with structural calculations coordinated in-house.
How quickly can you produce planning drawings in London?
After a laser survey, a standard householder set is typically ready within 7 days. We review every drawing against your borough's validation checklist before it reaches a planner's desk, which is why our first-time approval rate sits around 96%.
| Drawing | Typical scale | What it shows |
|---|---|---|
| Site location plan | 1:1250 | The property in its street context, site edged red |
| Block plan | 1:500 | The building's footprint and position in the plot |
| Floor plans (existing & proposed) | 1:100 / 1:50 | Room layout, walls, openings and the proposed changes |
| Elevations (existing & proposed) | 1:100 / 1:50 | Each face of the building and how it changes |
| Sections | 1:100 / 1:50 | A cut through showing heights, levels and roof form |
Planning Drawings in Bromley BR1 — FAQs
What scale should London planning drawings be?+
Do I need an architect to produce planning drawings?+
How many revisions are included in the fee?+
Can you draw from my existing plans?+
Do planning drawings guarantee approval?+
Do I need planning permission for an extension in Bromley?+
Can I build a bigger extension because Bromley plots are larger?+
How does green-belt designation affect my Bromley project?+
How long does Bromley Council take to decide?+
How much do planning drawings cost in Bromley?+
Get your free Bromley planning assessment
Tell us your Bromley (BR1) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.