Planning Drawings in Vauxhall SE11
Fixed-fee, MCIAT-chartered planning drawings for Vauxhall (SE11) homeowners — London Borough of Lambeth validation and local constraints handled from the start.
Vauxhall in SE11 is a tight inner-London mix: Georgian and Victorian terraces around Bonnington Square and the Vauxhall Gardens estate, mansion flats, and new riverside towers pushing up through Nine Elms. Most of our work here is rear and side extensions, loft conversions, and flat conversions where owners want more space without leaving a well-connected pocket of Lambeth.
Several of these streets fall inside the Vauxhall, Vauxhall Gardens and Albert Embankment conservation areas, so roof lines, materials and front elevations are scrutinised closely. We prepare drawings that read cleanly against the period grain of the terrace and give Lambeth's planning and conservation officers the detail they expect, which is how we keep first-time approval rates high on sensitive frontages.
Planning in Vauxhall (SE11): what to know before you apply
There is no published householder Article 4 direction we rely on for Vauxhall, but the Vauxhall, Vauxhall Gardens and Albert Embankment conservation areas remove some permitted-development rights and tighten control over roof and frontage changes. Rear-extension depth and party-wall relationships are the usual limiting factors on the terraced stock.
Typical Vauxhall housing stock
Vauxhall pairs surviving Georgian and early-Victorian terraces around Bonnington Square and the Vauxhall Gardens estate with mansion flats and a wave of new Nine Elms riverside apartments. The older stock drives loft conversions, rear extensions and careful flat conversions, while period frontages set the tone the council expects new work to respect.
Streets we regularly draw for in Vauxhall
Tradescant Road · Bolney Street · Glasshouse Walk · Worgan Street
What SE11 is actually built of
Measured from 291 classified residential buildings in SE11, not from a description of the area.
Vauxhall SE11 housing mix
Residential building form across the SE11 postcode district, from 291 classified buildings.
| Attached on more than one side | 73% |
|---|---|
| Attached on one side | 23% |
| Detached | 4% |
| Median building footprint | 59 m² |
| Addresses per buildingAbove about 2 means flats and maisonettes dominate | 4.87 |
| Buildings classified | 291 |
Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-08-17.
Planning Drawings for Vauxhall (SE11) homes: the package and the process
A planning set is judged as a set, not as individual sheets. Every existing drawing needs its proposed counterpart at the same scale and orientation so the officer can read the change at a glance, each sheet needs its own number, title, scale bar and north point, and the whole package needs to survive being printed at A3 without a dimension becoming illegible.
We draw to the conventions validation teams expect: plans and elevations at 1:100 or 1:50, a location plan at 1:1250 with the site edged red, a block plan at 1:500, and sections cut where the change in level or roof form actually happens rather than where they are easiest to draw.
The drawing list itself changes with the building. A detached house needs four elevations; a mid-terrace needs two plus a section through the party walls to show what is not visible from outside. Getting that list right at the start is what stops a validation officer asking for a sheet three weeks in.
What is included in a planning drawing set?
A council will only validate an application that contains the right drawings at the right scale. Our standard planning set covers everything a London validation team expects.
- Site location plan (1:1250) and block plan (1:500)
- Existing floor plans, elevations and sections
- Proposed floor plans, elevations and sections
- Roof plans where relevant, with heights and materials annotated
- A design and access or heritage statement where the borough requires one
How are planning drawings different from building regulations drawings?
Planning drawings show what the building will look like and how it sits in its context. Building regulations drawings show how it will be built safely — structure, insulation, fire escape and drainage. Most projects need both; our Complete package covers the two together with structural calculations coordinated in-house.
How quickly can you produce planning drawings in London?
After a laser survey, a standard householder set is typically ready within 7 days. We review every drawing against your borough's validation checklist before it reaches a planner's desk, which is why our first-time approval rate sits around 96%.
| Drawing | Typical scale | What it shows |
|---|---|---|
| Site location plan | 1:1250 | The property in its street context, site edged red |
| Block plan | 1:500 | The building's footprint and position in the plot |
| Floor plans (existing & proposed) | 1:100 / 1:50 | Room layout, walls, openings and the proposed changes |
| Elevations (existing & proposed) | 1:100 / 1:50 | Each face of the building and how it changes |
| Sections | 1:100 / 1:50 | A cut through showing heights, levels and roof form |
Planning Drawings in Vauxhall SE11 — FAQs
What scale should London planning drawings be?+
Do I need an architect to produce planning drawings?+
How many revisions are included in the fee?+
Can you draw from my existing plans?+
Do planning drawings guarantee approval?+
Do I need planning permission for a side-return extension in Lambeth?+
My Lambeth home is a converted flat — does that change things?+
What does Lambeth's HMO Article 4 direction affect?+
How long does Lambeth Council take to decide?+
How much do planning drawings cost in Lambeth?+
Get your free Vauxhall planning assessment
Tell us your Vauxhall (SE11) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.