MCIAT chartered drawings · Fixed fees across all 33 London boroughs

Free 2026 London Planning ReportPlanning Drawings in Twickenham TW2

Loft conversion bedroom in an Edwardian house in Twickenham, Richmond (TW2)
Twickenham · TW2 · Richmond

Planning Drawings in Twickenham TW2

Fixed-fee, MCIAT-chartered planning drawings for Twickenham (TW2) homeowners — London Borough of Richmond upon Thames validation and local constraints handled from the start.

Free Twickenham planning assessment

Tell us your Twickenham (TW2) address and project. A fixed quote and free planning appraisal land within one working day.

No obligation · No spam · Reply within 1 working day

TW2 is Twickenham's suburban heart around Twickenham Green, a district of bay-fronted Victorian and Edwardian homes where owners commonly plan a rear kitchen extension, a side return or a loft conversion to a growing family house.

Because Article 4 directions bite in the Rosecroft Gardens conservation area and on part of First Cross Road, permitted-development rights are curtailed there, so a boundary check comes before any assumption of PD and a full householder application is often the correct route.

Loft conversion bedroom in an Edwardian house in Twickenham, Richmond (TW2)
Isometric illustration of a Twickenham TW2 home planning drawings design
Proposed floor plan
Twickenham TW2

Planning in Twickenham (TW2): what to know before you apply

Outside the designated streets many rear and loft projects still fall under permitted development. Where an Article 4 direction applies, in Rosecroft Gardens or on the named First Cross Road properties, a householder planning application is required for works that would otherwise be permitted.

Typical Twickenham housing stock

This part of Twickenham is largely late-Victorian and Edwardian, with bay-fronted terraces and semi-detached villas around Twickenham Green and the planned Edwardian streets of the Rosecroft Gardens estate.

Streets we regularly draw for in Twickenham

Rosecroft Gardens · Denehurst Gardens · Gladstone Avenue · First Cross Road

What TW2 is actually built of

Measured from 345 classified residential buildings in TW2, not from a description of the area.

Twickenham TW2 housing mix

Residential building form across the TW2 postcode district, from 345 classified buildings.

Attached on more than one side40%
Attached on one side55%
Detached5%
Median building footprint63 m²
Addresses per buildingAbove about 2 means flats and maisonettes dominate1.17
Buildings classified345

Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-08-17.

Planning Drawings for Twickenham (TW2) homes: the package and the process

A planning set is judged as a set, not as individual sheets. Every existing drawing needs its proposed counterpart at the same scale and orientation so the officer can read the change at a glance, each sheet needs its own number, title, scale bar and north point, and the whole package needs to survive being printed at A3 without a dimension becoming illegible.

We draw to the conventions validation teams expect: plans and elevations at 1:100 or 1:50, a location plan at 1:1250 with the site edged red, a block plan at 1:500, and sections cut where the change in level or roof form actually happens rather than where they are easiest to draw.

The drawing list itself changes with the building. A detached house needs four elevations; a mid-terrace needs two plus a section through the party walls to show what is not visible from outside. Getting that list right at the start is what stops a validation officer asking for a sheet three weeks in.

What is included in a planning drawing set?

A council will only validate an application that contains the right drawings at the right scale. Our standard planning set covers everything a London validation team expects.

  • Site location plan (1:1250) and block plan (1:500)
  • Existing floor plans, elevations and sections
  • Proposed floor plans, elevations and sections
  • Roof plans where relevant, with heights and materials annotated
  • A design and access or heritage statement where the borough requires one

How are planning drawings different from building regulations drawings?

Planning drawings show what the building will look like and how it sits in its context. Building regulations drawings show how it will be built safely — structure, insulation, fire escape and drainage. Most projects need both; our Complete package covers the two together with structural calculations coordinated in-house.

How quickly can you produce planning drawings in London?

After a laser survey, a standard householder set is typically ready within 7 days. We review every drawing against your borough's validation checklist before it reaches a planner's desk, which is why our first-time approval rate sits around 96%.

What a London planning drawing set contains
DrawingTypical scaleWhat it shows
Site location plan1:1250The property in its street context, site edged red
Block plan1:500The building's footprint and position in the plot
Floor plans (existing & proposed)1:100 / 1:50Room layout, walls, openings and the proposed changes
Elevations (existing & proposed)1:100 / 1:50Each face of the building and how it changes
Sections1:100 / 1:50A cut through showing heights, levels and roof form
Sheet from a planning drawings package drawn for a Twickenham property in TW2, showing the existing and proposed arrangement at scale
A sheet from the planning drawings package we submit to London Borough of Richmond upon Thames for Twickenham (TW2) properties.
FAQ

Planning Drawings in Twickenham TW2 — FAQs

What scale should London planning drawings be?+
Site location plans are 1:1250, block plans 1:500, and floor plans, elevations and sections are typically 1:100 or 1:50. We format every drawing to your specific borough's requirements.
Do I need an architect to produce planning drawings?+
No. MCIAT-chartered architectural technologists produce the same council-accepted planning drawings with the same professional accountability, and councils assess the drawings, not the author's job title.
How many revisions are included in the fee?+
All of them. The fee is fixed and we redraw free until your council approves — revisions requested by a planning officer never cost you extra.
Can you draw from my existing plans?+
We can work from existing measured drawings, but for accuracy we usually carry out a laser survey so the proposed set matches your property exactly.
Do planning drawings guarantee approval?+
No drawing can guarantee a decision, but drawing to the local plan and validation checklist maximises your odds — and we redraw free until approval.
Do I need planning permission for an extension in Richmond?+
More often than in most boroughs, yes. Richmond has some of the most extensive Article 4 coverage in London, so permitted development cannot be assumed even for modest works — many conservation areas such as Richmond Green, Teddington and Kew Green require a full application. We confirm the exact designation for your address first and design accordingly rather than relying on permitted development.
My Richmond home is near the river — does flood risk affect my application?+
It can. Much of the borough lies within the Thames flood zone, and the council expects flood-risk considerations to be addressed for works near the river in Twickenham, Richmond and Hampton. We evidence flood-risk and finished-floor-level considerations within the application so the council can validate and approve without repeated revisions.
What does Richmond's Article 4 coverage mean in practice?+
Article 4 directions remove permitted development rights across many of Richmond's conservation areas, so alterations that would be automatic elsewhere — dormers, cladding, some rear works — need a full householder application here. We design context-led drawings that respond to the borough's period townscape and river frontage, which is what carries an application to consent in Richmond.
How long does Richmond Council take to decide?+
Richmond determines most householder applications within the statutory eight-week period once validated, though conservation and riverside cases can attract additional consultation. Because so much turns on design detail here, we prepare submissions to the validation checklist with the elevations and materials the council expects, to avoid drawing queries.
How much do planning drawings cost in Richmond?+
We agree a fixed fee before starting, typically around 30% below an architect's fee for the same council-accepted drawings, with free redraws until Richmond approves. Conservation and flood-zone cases require more evidence than a standard extension, so we quote once we understand your address and scheme rather than by the hour.
Free Fixed Quote

Get your free Twickenham planning assessment

Tell us your Twickenham (TW2) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.