Planning Drawings in Edgware HA8
Fixed-fee, MCIAT-chartered planning drawings for Edgware (HA8) homeowners — London Borough of Barnet validation and local constraints handled from the start.
Edgware (HA8) is a planned interwar Metro-land suburb of consistent semis and terraces, including the distinctive 1920s LCC cottage housing of the Watling Estate. Deep gardens and standard hipped-roof forms make rear extensions, hip-to-gable lofts and rear dormers the usual work, most of it within Barnet's householder framework along the historic Edgware Road corridor.
The Watling Estate and Canons Park Estate conservation areas protect the neighbourhood's planned uniformity, controlling frontages, materials and roofscape more tightly than in a typical speculative street. We design extensions that hold the estate's building line, render and hipped-roof rhythm, and prepare conservation-grade drawings where needed so schemes meet Barnet Council's approval standard.
Planning in Edgware (HA8): what to know before you apply
No published householder Article 4 direction in Edgware, so most work runs under permitted development or a standard Barnet application. Properties within the Watling Estate or Canons Park Estate conservation areas have reduced permitted-development rights and tighter control on frontages, materials and roof alterations to preserve the planned interwar character.
Typical Edgware housing stock
Edgware (HA8) is a quintessential Metro-land suburb of 1920s-30s semis and short terraces, from speculative bay-fronted pairs to the planned 1920s LCC cottage houses of the Watling Estate. Consistent hipped roofs, rendered gables and long rear gardens make loft dormers and rear extensions the typical projects.
Streets we regularly draw for in Edgware
Edgwarebury Lane · Hale Drive · Sefton Avenue · Orange Hill Road
What HA8 is actually built of
Measured from 439 classified residential buildings in HA8, not from a description of the area.
Edgware HA8 housing mix
Residential building form across the HA8 postcode district, from 439 classified buildings.
| Attached on more than one side | 42% |
|---|---|
| Attached on one side | 52% |
| Detached | 5% |
| Median building footprint | 58 m² |
| Addresses per buildingAbove about 2 means flats and maisonettes dominate | 1.41 |
| Buildings classified | 439 |
Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-08-17.
Planning Drawings for Edgware (HA8) homes: the package and the process
A planning set is judged as a set, not as individual sheets. Every existing drawing needs its proposed counterpart at the same scale and orientation so the officer can read the change at a glance, each sheet needs its own number, title, scale bar and north point, and the whole package needs to survive being printed at A3 without a dimension becoming illegible.
We draw to the conventions validation teams expect: plans and elevations at 1:100 or 1:50, a location plan at 1:1250 with the site edged red, a block plan at 1:500, and sections cut where the change in level or roof form actually happens rather than where they are easiest to draw.
The drawing list itself changes with the building. A detached house needs four elevations; a mid-terrace needs two plus a section through the party walls to show what is not visible from outside. Getting that list right at the start is what stops a validation officer asking for a sheet three weeks in.
What is included in a planning drawing set?
A council will only validate an application that contains the right drawings at the right scale. Our standard planning set covers everything a London validation team expects.
- Site location plan (1:1250) and block plan (1:500)
- Existing floor plans, elevations and sections
- Proposed floor plans, elevations and sections
- Roof plans where relevant, with heights and materials annotated
- A design and access or heritage statement where the borough requires one
How are planning drawings different from building regulations drawings?
Planning drawings show what the building will look like and how it sits in its context. Building regulations drawings show how it will be built safely — structure, insulation, fire escape and drainage. Most projects need both; our Complete package covers the two together with structural calculations coordinated in-house.
How quickly can you produce planning drawings in London?
After a laser survey, a standard householder set is typically ready within 7 days. We review every drawing against your borough's validation checklist before it reaches a planner's desk, which is why our first-time approval rate sits around 96%.
| Drawing | Typical scale | What it shows |
|---|---|---|
| Site location plan | 1:1250 | The property in its street context, site edged red |
| Block plan | 1:500 | The building's footprint and position in the plot |
| Floor plans (existing & proposed) | 1:100 / 1:50 | Room layout, walls, openings and the proposed changes |
| Elevations (existing & proposed) | 1:100 / 1:50 | Each face of the building and how it changes |
| Sections | 1:100 / 1:50 | A cut through showing heights, levels and roof form |
Planning Drawings in Edgware HA8 — FAQs
What scale should London planning drawings be?+
Do I need an architect to produce planning drawings?+
How many revisions are included in the fee?+
Can you draw from my existing plans?+
Do planning drawings guarantee approval?+
Do I need planning permission for a loft or extension in Barnet?+
What is different about building in Hampstead Garden Suburb?+
Is a hip-to-gable loft conversion allowed on my Barnet semi?+
How long does Barnet take to decide an application?+
How much do Barnet planning drawings cost?+
Get your free Edgware planning assessment
Tell us your Edgware (HA8) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.