Planning Drawings in Camberwell SE5
Fixed-fee, MCIAT-chartered planning drawings for Camberwell (SE5) homeowners — London Borough of Southwark validation and local constraints handled from the start.
Camberwell (SE5) in Southwark ranges from the grand Georgian villas of Camberwell Grove — one of inner south London's finest early-19th-century streets — to the tighter Victorian terraces around Camberwell Green and Church Street. That mix means the right route for a loft or extension depends heavily on which part of SE5 a house sits in.
Two conservation areas, Camberwell Grove and Camberwell Green, cover much of the neighbourhood and closely control rooflines, materials and front elevations, while Southwark's Article 4 directions here mainly govern the town centre and shopping frontages rather than householder work. We check a Camberwell address against both before recommending a permitted-development or full-application route.
Planning in Camberwell (SE5): what to know before you apply
Southwark's Article 4 directions in SE5 largely concern Camberwell town centre and its protected shopping frontages rather than householder projects, so many Camberwell houses keep permitted development rights — but the Camberwell Grove and Camberwell Green conservation areas are the significant exceptions, tightly controlling the Georgian and Victorian rooflines and elevations that give the area its character.
Typical Camberwell housing stock
Grand Georgian and early-Victorian villas along Camberwell Grove and Grove Lane, denser Victorian terraces toward Camberwell Green and Church Street, and Georgian and Victorian houses climbing Denmark Hill.
Streets we regularly draw for in Camberwell
Camberwell Grove · Grove Lane · Denmark Hill · Camberwell Church Street
What SE5 is actually built of
Measured from 337 classified residential buildings in SE5, not from a description of the area.
Camberwell SE5 housing mix
Residential building form across the SE5 postcode district, from 337 classified buildings.
| Attached on more than one side | 73% |
|---|---|
| Attached on one side | 20% |
| Detached | 7% |
| Median building footprint | 63 m² |
| Addresses per buildingAbove about 2 means flats and maisonettes dominate | 3.37 |
| Buildings classified | 337 |
Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-08-17.
Planning Drawings for Camberwell (SE5) homes: the package and the process
A planning set is judged as a set, not as individual sheets. Every existing drawing needs its proposed counterpart at the same scale and orientation so the officer can read the change at a glance, each sheet needs its own number, title, scale bar and north point, and the whole package needs to survive being printed at A3 without a dimension becoming illegible.
We draw to the conventions validation teams expect: plans and elevations at 1:100 or 1:50, a location plan at 1:1250 with the site edged red, a block plan at 1:500, and sections cut where the change in level or roof form actually happens rather than where they are easiest to draw.
The drawing list itself changes with the building. A detached house needs four elevations; a mid-terrace needs two plus a section through the party walls to show what is not visible from outside. Getting that list right at the start is what stops a validation officer asking for a sheet three weeks in.
What is included in a planning drawing set?
A council will only validate an application that contains the right drawings at the right scale. Our standard planning set covers everything a London validation team expects.
- Site location plan (1:1250) and block plan (1:500)
- Existing floor plans, elevations and sections
- Proposed floor plans, elevations and sections
- Roof plans where relevant, with heights and materials annotated
- A design and access or heritage statement where the borough requires one
How are planning drawings different from building regulations drawings?
Planning drawings show what the building will look like and how it sits in its context. Building regulations drawings show how it will be built safely — structure, insulation, fire escape and drainage. Most projects need both; our Complete package covers the two together with structural calculations coordinated in-house.
How quickly can you produce planning drawings in London?
After a laser survey, a standard householder set is typically ready within 7 days. We review every drawing against your borough's validation checklist before it reaches a planner's desk, which is why our first-time approval rate sits around 96%.
| Drawing | Typical scale | What it shows |
|---|---|---|
| Site location plan | 1:1250 | The property in its street context, site edged red |
| Block plan | 1:500 | The building's footprint and position in the plot |
| Floor plans (existing & proposed) | 1:100 / 1:50 | Room layout, walls, openings and the proposed changes |
| Elevations (existing & proposed) | 1:100 / 1:50 | Each face of the building and how it changes |
| Sections | 1:100 / 1:50 | A cut through showing heights, levels and roof form |
Planning Drawings in Camberwell SE5 — FAQs
What scale should London planning drawings be?+
Do I need an architect to produce planning drawings?+
How many revisions are included in the fee?+
Can you draw from my existing plans?+
Do planning drawings guarantee approval?+
Do I need planning permission for an extension in Southwark?+
What is the Dulwich Estate scheme of management?+
Can you handle a warehouse or riverside conversion in Bermondsey or Bankside?+
How long does Southwark Council take to decide?+
How much do planning drawings cost in Southwark?+
Get your free Camberwell planning assessment
Tell us your Camberwell (SE5) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.