MCIAT chartered drawings · Fixed fees across all 33 London boroughs

Free 2026 London Planning ReportNew Build Drawings in Tower Hamlets

Georgian terraces and warehouse conversions of the kind found across Tower Hamlets' Spitalfields and Wapping
Tower Hamlets · London

New Build Drawings in Tower Hamlets

Fixed-fee, MCIAT-chartered new build drawings for Tower Hamlets homeowners — London Borough of Tower Hamlets validation and local constraints handled from the start.

Free Tower Hamlets planning assessment

Tell us your Tower Hamlets address and project. A fixed quote and free planning appraisal land within one working day.

No obligation · No spam · Reply within 1 working day

Tower Hamlets runs from the listed Georgian terraces of Spitalfields and the warehouse and wharf conversions of Wapping and Limehouse through the Victorian streets of Bow and Mile End to the dense purpose-built and estate housing of Bethnal Green, Poplar and Whitechapel and the towers of the Isle of Dogs. It is one of London's most heritage-dense and design-scrutinised boroughs, so the right route for an alteration or extension depends heavily on the building type and its conservation or listing status.

A high proportion of streets fall within conservation areas — Fournier Street and Elder Street in Spitalfields, Wapping Pierhead, Narrow Street in Limehouse, Victoria Park, Tredegar Square in Bow and Whitechapel Market — where permitted development is removed and even some changes of use are controlled. Spitalfields in particular carries a high density of listed Georgian terraces, where listed-building consent is usually required for many alterations, internal as well as external. Tower Hamlets also applies Article 4 directions removing permitted development for HMO conversions in parts of the borough, Thames-side flood-zone considerations run along the Wapping and Limehouse riverside, and tall-building and townscape context near the City fringe and Canary Wharf adds further design scrutiny.

We prepare Tower Hamlets planning and, where needed, listed-building submissions to the council's validation and design standards, screening conservation-area and listing constraints for your exact address before recommending a route to consent. Because the borough determines most householder applications within the statutory eight-week period once validated, we work validation-first to avoid the queries that cause most delays. The fee is fixed and agreed up front, drawings typically follow within about seven days, and we offer free redraws until the council approves — the same council-accepted drawings an architect would produce, usually at around 30% less.

Georgian terraces and warehouse conversions of the kind found across Tower Hamlets' Spitalfields and Wapping
Isometric illustration of a Tower Hamlets home extension design
Proposed floor plan
Tower Hamlets

Planning in Tower Hamlets: what to know before you apply

Tower Hamlets applies Article 4 directions to HMO conversions in parts of the borough and removes permitted development across its many conservation areas — Spitalfields, Wapping Pierhead and Tredegar Square among them. Spitalfields in particular carries a high density of listed Georgian terraces where listed-building consent is usually required. Thames flood-zone considerations apply along the riverside. We confirm the constraints for your address before drawing.

Typical Tower Hamlets housing stock

Georgian terraces around Spitalfields, warehouse and wharf conversions along the Wapping and Limehouse riverside, Victorian terraces across Bow and Mile End, and dense purpose-built and estate housing throughout the borough.

Areas we regularly draw for in Tower Hamlets

Bethnal Green · Bow · Poplar · Whitechapel · Wapping · Limehouse · Mile End · Isle of Dogs

What the numbers say about Tower Hamlets planning decisions

These are London Borough of Tower Hamlets’s own reported figures, published by government rather than estimated by us. They are what we design against — a borough that refuses one householder application in five needs a different drawing package from one that refuses one in twenty.

All development decided in Tower Hamlets

Every planning application London Borough of Tower Hamlets decided over the four quarters to 2026 Q1, not only householder work — a new dwelling is decided in this wider pool.

Applications decided998
Granted834
Refused164
GrantedAcross all development types, so it is not comparable with the householder rate84%
Householder applications within itThe rest is the pool a new dwelling is decided in203

Source: Ministry of Housing, Communities and Local Government (PS2 district planning application statistics). Open Government Licence v3.0 Extracted 2026-08-16.

If London Borough of Tower Hamlets refuses: appeal outcomes

Planning appeals against London Borough of Tower Hamlets determined by the Planning Inspectorate, 2021–2026. Enforcement notices and withdrawn cases are excluded.

Appeals determined312
Allowed78
Dismissed234
Householder appeals allowedFrom 75 householder appeals. England average 36%21%

Source: Planning Inspectorate appeals casework. Open Government Licence v3.0 Extracted 2026-08-16.

New Build Drawings for Tower Hamlets homes: the package and the process

A new dwelling is a full application rather than a householder one, and the drawing set reflects that: site layout with levels and boundaries, floor plans and elevations for the new building, sections showing how it sits in the ground, and street-scene elevations placing it against what is already there.

Two packages follow the approval — the planning set and the construction set — and they have to stay in step. Foundation design, drainage strategy, thermal performance and fire strategy are drawn for Building Control against the same geometry that was granted permission, so the built house matches the approved one.

An infill plot is designed against its neighbours. Plot width, the building line either side, and the ridge heights next door set what the new house can be — and on a tight urban site those constraints usually shape the design more than the brief does.

Is my plot suitable for a new build in London?

A feasibility assessment looks at plot size and shape, access, existing boundary conditions, relevant planning policy for the borough, and the likely impact of a new dwelling on neighbouring properties before any design work begins. Infill plots — a gap between existing buildings on a street — and backland plots — a garden or yard site behind existing houses, reached by a shared access — each raise different issues: infill schemes are usually judged on how well they match the scale, spacing and character of the street, while backland schemes are judged heavily on overlooking, garden loss for neighbours, and whether the access arrangement is acceptable. A feasibility study gives an honest view of whether a scheme is likely to succeed before you commit to full drawings.

What does pre-application advice add to a new build project?

Pre-application advice is a formal, paid process most London boroughs offer, where planning officers give written feedback on a proposed scheme before a full application is submitted. For a new build — where the principle of development itself is often the main issue, not just the design details — this feedback can be invaluable: it surfaces concerns around density, massing, daylight and sunlight or heritage context early enough to be addressed in the drawings, rather than discovered for the first time as a refusal reason months into a full application. We prepare and submit pre-application enquiries as part of the new build service where it is likely to strengthen the eventual planning application.

How do daylight, sunlight and overlooking affect a new build design?

London boroughs assess new dwellings against their effect on the daylight and sunlight reaching neighbouring homes and gardens, commonly using the 45-degree rule as an initial check on a proposal's massing and position relative to neighbouring windows, alongside more detailed daylight and sunlight assessment on sensitive sites. Overlooking and loss of privacy from new windows, upper floors or roof terraces are assessed similarly, and often shape decisions on window placement, floor-to-floor heights and the overall footprint and massing of the new building. Designing with these constraints from the earliest sketch stage, rather than adjusting for them after a refusal, is one of the main advantages of instructing feasibility and pre-application work before a full planning set.

New build project stages
StageWhat it establishesTypical fee guide
FeasibilityWhether the plot can support a new dwelling and the likely constraintsQuoted individually, from within the £2,500 new build fee
Pre-application adviceWritten borough feedback on the scheme before a full applicationQuoted individually alongside the planning fee
Full planning drawingsThe complete drawing set submitted for planning permissionFrom £2,500
Building regs and structuralConstruction-ready drawings and calculations for buildingFrom £2,200–£3,850, quoted once planning is settled
Sheet from a new build drawings package prepared for a Tower Hamlets property, drawn to London Borough of Tower Hamlets validation standards
A sheet from the new build drawings package we submit to London Borough of Tower Hamlets.
FAQ

New Build Drawings in Tower Hamlets — FAQs

How much do new build drawings cost in London?+
New build drawings start from £2,500 for feasibility and a full planning drawing set on a straightforward infill or backland plot, with building regulations and structural drawings quoted separately once the planning design is agreed.
Can any garden or backland plot be built on in London?+
Not necessarily — backland and garden plots are assessed on access, overlooking, loss of garden amenity for neighbours and borough policy, and a feasibility assessment gives an honest early view of whether a scheme is likely to be supported.
Do I need pre-application advice before a full new build application?+
It is not mandatory, but for a new dwelling — where the principle of development is often the main issue — pre-application advice can surface concerns early enough to address them in the design, reducing the risk of refusal.
Do you handle building regulations and structural drawings for a new build, or only planning?+
Both — the full new build service covers planning, building regulations and structural drawings from one in-house team, so the design stays consistent from feasibility through to construction-ready drawings.
How long does a new build project take from feasibility to planning permission?+
This varies with site complexity and whether pre-application advice is sought, but a full planning application is determined within the statutory period the borough applies to the application type, once submitted via the Planning Portal.
Do I need planning permission for an extension in Tower Hamlets?+
Frequently, yes. A high proportion of the borough sits within a conservation area — Spitalfields, Wapping Pierhead and Tredegar Square among them — where permitted development is removed. On unlisted homes outside a conservation area a rear extension may still qualify. We check your address against the designations first and can confirm permitted development with a Lawful Development Certificate where it qualifies.
My Tower Hamlets property is listed — what consent do I need?+
Listed-building consent is usually required alongside or instead of planning permission, and internal as well as external changes can be controlled. The Georgian terraces around Spitalfields carry a high density of listed buildings. We screen listing status for your address first and prepare the heritage-led drawings and justification the council expects.
Can you handle a warehouse or riverside conversion in Wapping or Limehouse?+
Yes. The Wapping and Limehouse riverside carries its own townscape, conservation and flood-zone context, and conversions there are assessed against design control near the Thames. We prepare drawings that respond to that setting and evidence the flood-risk considerations, confirming the constraints for your specific building before design begins.
How long does Tower Hamlets Council take to decide?+
Tower Hamlets determines most householder applications within the statutory eight-week period once validated; listed-building, conservation and riverside cases can involve additional consultation. We prepare submissions to the council's validation and design standards to avoid the drawing queries that cause most delays.
How much do planning drawings cost in Tower Hamlets?+
We agree a fixed fee before we start, typically around 30% below an architect's fee for the same council-accepted drawings, with free redraws until the council approves. A conservation-area extension, a listed-building scheme and a riverside conversion differ in the evidence required, so we quote once we have seen your address and project rather than by the hour.
Free Fixed Quote

Get your free Tower Hamlets planning assessment

Tell us your Tower Hamlets address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.