New Build Drawings in Harold Wood RM3
Fixed-fee, MCIAT-chartered new build drawings for Harold Wood (RM3) homeowners — London Borough of Havering validation and local constraints handled from the start.
Harold Wood (RM3) grew as a commuter suburb around its station, which opened in 1868, with interwar and postwar estates built for families moving out along the Essex railway and now served by the Elizabeth line. Its stock is predominantly 1930s semi-detached and postwar houses on planned estate roads, so almost every householder project here is an extension or loft on a consistent suburban semi that sits within a settled streetscape.
There is no conservation area covering Harold Wood — that is a genuine, verified fact, not an omission. Its planning character is shaped instead by that interwar and postwar commuter-suburb typology and by Havering's householder design expectations, which favour keeping the semi-detached rhythm, materials and roof forms intact. We treat that streetscape cohesion, rather than a conservation designation, as the reference point when we design an extension.
Most of the work here is rear extensions, side infills and loft conversions on the semis lining roads like Rosslyn Avenue, Squirrels Heath Road and Bryant Avenue, where the regular gardened plots leave room to extend. We check each property's permitted-development position against Havering's borough-wide controls first, then prepare drawings that either stay within permitted development or are ready to validate as a full householder application.
Planning in Harold Wood (RM3): what to know before you apply
Because Harold Wood is a cohesive interwar and postwar semi-detached suburb, Havering assess extensions against the consistent street pattern, so matching brick, render, bay detailing and roof form matters. There is no conservation area and no local Article 4 direction, so many houses retain permitted development rights for rear and loft work — but the shared building lines on the semis and the side gaps between pairs mean depth, spacing and neighbour impact are the points a householder application turns on.
Typical Harold Wood housing stock
Predominantly 1930s semi-detached and postwar houses on planned estate roads, set on regular gardened plots well suited to rear and side extensions. That consistent suburban semi with its bay frontage and generous back garden is the typical canvas for extension and loft-conversion work here.
Streets we regularly draw for in Harold Wood
Oak Road · Athelstan Road · Squirrels Heath Road · Rosslyn Avenue · Archibald Road · Gooshays Drive · Chatteris Avenue · Gubbins Lane · Arundel Road · Station Road · Avenue Road · Bryant Avenue
What RM3 is actually built of
Measured from 402 classified residential buildings in RM3, not from a description of the area.
Harold Wood RM3 housing mix
Residential building form across the RM3 postcode district, from 402 classified buildings.
| Attached on more than one side | 38% |
|---|---|
| Attached on one side | 54% |
| Detached | 8% |
| Median building footprint | 53 m² |
| Addresses per buildingAbove about 2 means flats and maisonettes dominate | 1.22 |
| Buildings classified | 402 |
Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-08-17.
New Build Drawings for Harold Wood (RM3) homes: the package and the process
A new dwelling is a full application rather than a householder one, and the drawing set reflects that: site layout with levels and boundaries, floor plans and elevations for the new building, sections showing how it sits in the ground, and street-scene elevations placing it against what is already there.
Two packages follow the approval — the planning set and the construction set — and they have to stay in step. Foundation design, drainage strategy, thermal performance and fire strategy are drawn for Building Control against the same geometry that was granted permission, so the built house matches the approved one.
An infill plot is designed against its neighbours. Plot width, the building line either side, and the ridge heights next door set what the new house can be — and on a tight urban site those constraints usually shape the design more than the brief does.
Is my plot suitable for a new build in London?
A feasibility assessment looks at plot size and shape, access, existing boundary conditions, relevant planning policy for the borough, and the likely impact of a new dwelling on neighbouring properties before any design work begins. Infill plots — a gap between existing buildings on a street — and backland plots — a garden or yard site behind existing houses, reached by a shared access — each raise different issues: infill schemes are usually judged on how well they match the scale, spacing and character of the street, while backland schemes are judged heavily on overlooking, garden loss for neighbours, and whether the access arrangement is acceptable. A feasibility study gives an honest view of whether a scheme is likely to succeed before you commit to full drawings.
What does pre-application advice add to a new build project?
Pre-application advice is a formal, paid process most London boroughs offer, where planning officers give written feedback on a proposed scheme before a full application is submitted. For a new build — where the principle of development itself is often the main issue, not just the design details — this feedback can be invaluable: it surfaces concerns around density, massing, daylight and sunlight or heritage context early enough to be addressed in the drawings, rather than discovered for the first time as a refusal reason months into a full application. We prepare and submit pre-application enquiries as part of the new build service where it is likely to strengthen the eventual planning application.
How do daylight, sunlight and overlooking affect a new build design?
London boroughs assess new dwellings against their effect on the daylight and sunlight reaching neighbouring homes and gardens, commonly using the 45-degree rule as an initial check on a proposal's massing and position relative to neighbouring windows, alongside more detailed daylight and sunlight assessment on sensitive sites. Overlooking and loss of privacy from new windows, upper floors or roof terraces are assessed similarly, and often shape decisions on window placement, floor-to-floor heights and the overall footprint and massing of the new building. Designing with these constraints from the earliest sketch stage, rather than adjusting for them after a refusal, is one of the main advantages of instructing feasibility and pre-application work before a full planning set.
| Stage | What it establishes | Typical fee guide |
|---|---|---|
| Feasibility | Whether the plot can support a new dwelling and the likely constraints | Quoted individually, from within the £2,500 new build fee |
| Pre-application advice | Written borough feedback on the scheme before a full application | Quoted individually alongside the planning fee |
| Full planning drawings | The complete drawing set submitted for planning permission | From £2,500 |
| Building regs and structural | Construction-ready drawings and calculations for building | From £2,200–£3,850, quoted once planning is settled |
New Build Drawings in Harold Wood RM3 — FAQs
How much do new build drawings cost in London?+
Can any garden or backland plot be built on in London?+
Do I need pre-application advice before a full new build application?+
Do you handle building regulations and structural drawings for a new build, or only planning?+
How long does a new build project take from feasibility to planning permission?+
Do I need planning permission to extend a house in Harold Wood?+
Is Harold Wood in a conservation area?+
How much do planning and building-regulation drawings cost for a Harold Wood extension?+
How long does Havering Council take to decide?+
Get your free Harold Wood planning assessment
Tell us your Harold Wood (RM3) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.