New Build Drawings in Hampstead NW3
Fixed-fee, MCIAT-chartered new build drawings for Hampstead (NW3) homeowners — London Borough of Camden validation and local constraints handled from the start.
Hampstead (NW3) is, in permitted-development terms, close to a special case. Three conservation areas cover the district — Hampstead, Belsize and Fitzjohns/Netherhall — and Camden has attached a non-immediate Article 4 direction to each of them, on top of the borough-wide Basements direction. The practical effect is that very little in NW3 proceeds under permitted development.
That reshapes what a project looks like here. Basement works need a full application under the Basements direction; the non-immediate Article 4 directions across Hampstead (excluding Frognal Way), Belsize and Fitzjohns/Netherhall strip further rights inside those conservation areas; the village core carries a very high concentration of listed buildings needing listed building consent alongside planning; and because so many of the large Fitzjohns Avenue and Belsize Park villas were long ago converted into flats, a large share of NW3 work is flat alteration — where permitted development rights do not exist in the first place. We establish the designation, listing and tenure position for an NW3 address before drawing to Camden's guidance.
Planning in Hampstead (NW3): what to know before you apply
NW3 is one of the most heavily restricted districts in London for householder work. Camden's Basements Article 4 direction removes permitted development rights for basement schemes, and non-immediate Article 4 directions apply across all three conservation areas — Hampstead (excluding Frognal Way), Belsize and Fitzjohns/Netherhall — removing further rights inside them. The village core has a very high concentration of listed buildings requiring listed building consent, and the widespread conversion of the large villas into flats means many NW3 projects have no permitted development rights regardless of designation. Assume a full application in NW3.
Typical Hampstead housing stock
Georgian houses in the old village core, substantial Victorian red-brick villas along Fitzjohns Avenue and Netherhall Gardens, and large Victorian semi-detached and terraced houses through Belsize Park, much of it converted to flats.
Streets we regularly draw for in Hampstead
Hampstead High Street · Fitzjohns Avenue · Netherhall Gardens · Belsize Park Gardens
What NW3 is actually built of
Measured from 237 classified residential buildings in NW3, not from a description of the area.
Hampstead NW3 housing mix
Residential building form across the NW3 postcode district, from 237 classified buildings.
| Attached on more than one side | 43% |
|---|---|
| Attached on one side | 37% |
| Detached | 20% |
| Median building footprint | 92 m² |
| Addresses per buildingAbove about 2 means flats and maisonettes dominate | 2.82 |
| Buildings classified | 237 |
Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-08-17.
New Build Drawings for Hampstead (NW3) homes: the package and the process
A new dwelling is a full application rather than a householder one, and the drawing set reflects that: site layout with levels and boundaries, floor plans and elevations for the new building, sections showing how it sits in the ground, and street-scene elevations placing it against what is already there.
Two packages follow the approval — the planning set and the construction set — and they have to stay in step. Foundation design, drainage strategy, thermal performance and fire strategy are drawn for Building Control against the same geometry that was granted permission, so the built house matches the approved one.
An infill plot is designed against its neighbours. Plot width, the building line either side, and the ridge heights next door set what the new house can be — and on a tight urban site those constraints usually shape the design more than the brief does.
Is my plot suitable for a new build in London?
A feasibility assessment looks at plot size and shape, access, existing boundary conditions, relevant planning policy for the borough, and the likely impact of a new dwelling on neighbouring properties before any design work begins. Infill plots — a gap between existing buildings on a street — and backland plots — a garden or yard site behind existing houses, reached by a shared access — each raise different issues: infill schemes are usually judged on how well they match the scale, spacing and character of the street, while backland schemes are judged heavily on overlooking, garden loss for neighbours, and whether the access arrangement is acceptable. A feasibility study gives an honest view of whether a scheme is likely to succeed before you commit to full drawings.
What does pre-application advice add to a new build project?
Pre-application advice is a formal, paid process most London boroughs offer, where planning officers give written feedback on a proposed scheme before a full application is submitted. For a new build — where the principle of development itself is often the main issue, not just the design details — this feedback can be invaluable: it surfaces concerns around density, massing, daylight and sunlight or heritage context early enough to be addressed in the drawings, rather than discovered for the first time as a refusal reason months into a full application. We prepare and submit pre-application enquiries as part of the new build service where it is likely to strengthen the eventual planning application.
How do daylight, sunlight and overlooking affect a new build design?
London boroughs assess new dwellings against their effect on the daylight and sunlight reaching neighbouring homes and gardens, commonly using the 45-degree rule as an initial check on a proposal's massing and position relative to neighbouring windows, alongside more detailed daylight and sunlight assessment on sensitive sites. Overlooking and loss of privacy from new windows, upper floors or roof terraces are assessed similarly, and often shape decisions on window placement, floor-to-floor heights and the overall footprint and massing of the new building. Designing with these constraints from the earliest sketch stage, rather than adjusting for them after a refusal, is one of the main advantages of instructing feasibility and pre-application work before a full planning set.
| Stage | What it establishes | Typical fee guide |
|---|---|---|
| Feasibility | Whether the plot can support a new dwelling and the likely constraints | Quoted individually, from within the £2,500 new build fee |
| Pre-application advice | Written borough feedback on the scheme before a full application | Quoted individually alongside the planning fee |
| Full planning drawings | The complete drawing set submitted for planning permission | From £2,500 |
| Building regs and structural | Construction-ready drawings and calculations for building | From £2,200–£3,850, quoted once planning is settled |
New Build Drawings in Hampstead NW3 — FAQs
How much do new build drawings cost in London?+
Can any garden or backland plot be built on in London?+
Do I need pre-application advice before a full new build application?+
Do you handle building regulations and structural drawings for a new build, or only planning?+
How long does a new build project take from feasibility to planning permission?+
Do I need planning permission for a rear extension in Camden?+
What is a Basement Impact Assessment and will I need one in Camden?+
Can I make changes to a listed building in Camden?+
How long does Camden take to decide an application?+
How much do planning drawings cost in Camden?+
Get your free Hampstead planning assessment
Tell us your Hampstead (NW3) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.