Kitchen extension inside a Georgian townhouse near Kew Green in Richmond TW9, London Borough of Richmond upon Thames

Richmond · TW9 · Richmond

Mansard Loft Conversion Drawings in Richmond TW9

Fixed-fee, MCIAT-chartered mansard loft conversion drawings for Richmond (TW9) homeowners — London Borough of Richmond upon Thames validation and local constraints handled from the start.

Richmond (TW9) spans the town centre and the Kew border, layering conservation areas including Kew Green, Richmond Green, Central Richmond and Lawn Crescent across its Georgian and Victorian streets.

The Kew Green conservation area, with the Thames Path running past St Anne's churchyard and Kew Pond, protects 18th-century cottages such as Cambridge Cottages, which carry their own Article 4 direction.

Proposed floor plan

Richmond TW9

Richmond (TW9) — planning at a glance

Council: London Borough of Richmond upon Thames
Postcode district: TW9
Planning portal: View the Richmond planning portal
Housing stock: Georgian yellow-brick cottages and townhouses around Kew Green and Richmond Green, with later Victorian and Edwardian terraces filling out the Kew Gardens and Lawn Crescent streets.
Article 4: Cambridge Cottages in Kew and the wider Kew Green conservation area carry Article 4 directions, so extensions, replacement windows and doors, painting or rendering brickwork, removing chimneys and hard-surfacing front gardens need planning permission where they would otherwise be permitted development.
Conservation: Kew GreenRichmond GreenCentral RichmondLawn Crescent, KewKew Gardens
Sample streets: Kew Green · Cambridge Cottages · Lawn Crescent · Kew Foot Road · George Street · Kew Road
Local constraints: Article 4 directions on Cambridge Cottages and the Kew Green conservation area remove permitted-development rights, so shared original features across the terraces stay under planning control.The 18th-century cottages around Kew Green retain a high proportion of original detail — exposed timber sash frames and yellow stock brick — that the council resists altering.Central Richmond's conservation area runs along the George Street, Hill Street and Kew Road frontages, where the tight town-centre grain limits the scope for visible extensions.

Planning in Richmond (TW9): what to know before you apply

TW9 houses commonly sit inside the Kew Green, Richmond Green or Central Richmond conservation areas, and streets like Cambridge Cottages carry Article 4 directions — plan for front elevations, windows and roofs to need full planning permission rather than permitted development.

Typical Richmond housing stock

Georgian yellow-brick cottages and townhouses around Kew Green and Richmond Green, with later Victorian and Edwardian terraces filling out the Kew Gardens and Lawn Crescent streets.

Streets we regularly draw for in Richmond

Kew Green · Cambridge Cottages · Lawn Crescent · Kew Foot Road · George Street · Kew Road

What TW9 is actually built of

Measured from 349 classified residential buildings in TW9, not from a description of the area.

Richmond TW9 housing mix

Residential building form across the TW9 postcode district, from 349 classified buildings.

Attached on more than one side	47%
Attached on one side	42%
Detached	10%
Median building footprint	71 m²
Addresses per buildingAbove about 2 means flats and maisonettes dominate	1.67
Buildings classified	349

Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-08-17.

Mansard Loft Conversion Drawings for Richmond (TW9) homes: the package and the process

A mansard is a rebuild of the roof, so the drawings carry more structure than a dormer scheme: the new front and rear slopes with their pitch angles set out, the upstand and party wall junctions, the parapet and gutter detail, and a street-scene elevation showing the new roof against its neighbours.

That street scene usually decides the application. Where a terrace already has approved mansards, the drawing shows the new roof matching their line, pitch and window rhythm; where it would be the first, the case is made on the roof form itself. Either way the argument is drawn, not written.

Mansards belong to terraces and to parapeted stock. The form works because a near-vertical rear wall can rise off the party walls and sit behind a parapet, which is why it is the usual answer in tightly controlled streets and rarely the right answer on a detached house.

What is a mansard loft conversion?

A mansard replaces the rear roof slope — or, less commonly, the front and rear slopes together — with a new near-vertical wall rising from the party walls to a shallow flat roof at the ridge, with small dormer windows set into it. Unlike a dormer, which sits within the existing roof, a mansard changes the shape of the roof itself, which is why it is usually reserved for terraces where the extra headroom and floor area are worth the more involved planning and construction process. Because the new wall runs almost the full width of the house between the party walls, a mansard typically delivers noticeably more usable floor area than a single dormer of any kind, which is why it remains the preferred option on period terraces where every square metre of loft counts.

Does a mansard loft conversion need planning permission in London?

Yes, almost always. Permitted development rights for roof alterations are volume- and shape-limited, and a mansard goes well beyond what those limits allow because it materially alters the roof's profile rather than adding to it. Every mansard we draw is prepared as a full householder planning application, with a design and access statement where the borough requires one, so the council can properly assess the change to the roofline and its impact on neighbours and the street scene.

Why do conservation areas favour mansards?

Many London conservation areas already contain mansard roofs as part of the original streetscape — grand Georgian and Victorian terraces were frequently built with a mansard attic storey behind a parapet, so a matching modern mansard often reads as a restoration of the intended roofline rather than an alteration. Getting that read right depends on matching the existing slate or tile colour, the proportion and spacing of the dormer windows, and the eaves and parapet detailing of the host terrace — details we design in from the first drawing rather than treating as an afterthought.

Slate or tile colour and coursing matched to the existing roof and neighbouring properties
Dormer window proportions and spacing aligned to the terrace's existing rhythm
Eaves, parapet and party wall junctions detailed to sit flush with neighbouring roofs

Typical mansard loft conversion drawing packages
Package	Scope	Planning route	Fee from
Rear mansard, planning only	Design, planning drawings and supporting statement	Householder planning	£1,600
Rear mansard, planning and building regs	Planning drawings plus structural and Part L detailing	Householder planning	£2,200
Front and rear mansard	Full roof rebuild on both slopes, with structural	Householder planning	£2,400

Sheet from a mansard loft conversion drawings package drawn for a Richmond property in TW9, showing the existing and proposed arrangement at scale — A sheet from the mansard loft conversion drawings package we submit to London Borough of Richmond upon Thames for Richmond (TW9) properties.

Also in Richmond TW9

Planning Permission Planning Drawings Architectural Drawings Building Regulations Drawings Loft Conversion Drawings Mansard Loft Conversion Drawings across Richmond Mansard Loft Conversion Drawings across London

FAQ

Mansard Loft Conversion Drawings in Richmond TW9 — FAQs

How much do mansard loft conversion drawings cost in London?+

Planning drawings for a rear mansard typically start around £1,600. A combined planning and building regulations package, or a front-and-rear mansard, usually runs to around £2,200–£2,400 once structural calculations are included.

Can a mansard ever be permitted development?+

Rarely — because it changes the shape of the roof rather than adding within it, a mansard almost always exceeds permitted development tolerances. If you want to avoid a full application, ask us whether a dormer or hip-to-gable conversion would meet your space needs instead.

How long do mansard drawings take?+

A full planning drawing set is typically ready within about 10–14 days of survey, reflecting the extra design and consultation work a full roof rebuild involves. The statutory 8-week householder determination period then runs from validation.

Will a mansard need scaffolding and affect the whole roof?+

Yes — because the existing rear roof slope is removed and rebuilt, a mansard is a larger construction project than a dormer, and we design the sequencing and structural tie-ins with that in mind so your builder can programme the work efficiently.

Do you handle the party wall process as well as the drawings?+

We identify which neighbours require notice under the Party Wall etc. Act 1996 and provide the drawings needed to support the notice, so the party wall and planning processes can run in parallel rather than one waiting on the other.

Do I need planning permission for an extension in Richmond?+

More often than in most boroughs, yes. Richmond has some of the most extensive Article 4 coverage in London, so permitted development cannot be assumed even for modest works — many conservation areas such as Richmond Green, Teddington and Kew Green require a full application. We confirm the exact designation for your address first and design accordingly rather than relying on permitted development.

My Richmond home is near the river — does flood risk affect my application?+

It can. Much of the borough lies within the Thames flood zone, and the council expects flood-risk considerations to be addressed for works near the river in Twickenham, Richmond and Hampton. We evidence flood-risk and finished-floor-level considerations within the application so the council can validate and approve without repeated revisions.

What does Richmond's Article 4 coverage mean in practice?+

Article 4 directions remove permitted development rights across many of Richmond's conservation areas, so alterations that would be automatic elsewhere — dormers, cladding, some rear works — need a full householder application here. We design context-led drawings that respond to the borough's period townscape and river frontage, which is what carries an application to consent in Richmond.

How long does Richmond Council take to decide?+

Richmond determines most householder applications within the statutory eight-week period once validated, though conservation and riverside cases can attract additional consultation. Because so much turns on design detail here, we prepare submissions to the validation checklist with the elevations and materials the council expects, to avoid drawing queries.

How much do planning drawings cost in Richmond?+

We agree a fixed fee before starting, typically around 30% below an architect's fee for the same council-accepted drawings, with free redraws until Richmond approves. Conservation and flood-zone cases require more evidence than a standard extension, so we quote once we understand your address and scheme rather than by the hour.

Free Fixed Quote

Get your free Richmond planning assessment

Tell us your Richmond (TW9) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.