Kitchen extension inside a Georgian townhouse near Kew Green in Richmond TW9, London Borough of Richmond upon Thames

Richmond · TW9 · Richmond

Architectural Drawings in Richmond TW9

Fixed-fee, MCIAT-chartered architectural drawings for Richmond (TW9) homeowners — London Borough of Richmond upon Thames validation and local constraints handled from the start.

Richmond (TW9) spans the town centre and the Kew border, layering conservation areas including Kew Green, Richmond Green, Central Richmond and Lawn Crescent across its Georgian and Victorian streets.

The Kew Green conservation area, with the Thames Path running past St Anne's churchyard and Kew Pond, protects 18th-century cottages such as Cambridge Cottages, which carry their own Article 4 direction.

Proposed floor plan

Richmond TW9

Richmond (TW9) — planning at a glance

Council: London Borough of Richmond upon Thames
Postcode district: TW9
Planning portal: View the Richmond planning portal
Housing stock: Georgian yellow-brick cottages and townhouses around Kew Green and Richmond Green, with later Victorian and Edwardian terraces filling out the Kew Gardens and Lawn Crescent streets.
Article 4: Cambridge Cottages in Kew and the wider Kew Green conservation area carry Article 4 directions, so extensions, replacement windows and doors, painting or rendering brickwork, removing chimneys and hard-surfacing front gardens need planning permission where they would otherwise be permitted development.
Conservation: Kew GreenRichmond GreenCentral RichmondLawn Crescent, KewKew Gardens
Sample streets: Kew Green · Cambridge Cottages · Lawn Crescent · Kew Foot Road · George Street · Kew Road
Local constraints: Article 4 directions on Cambridge Cottages and the Kew Green conservation area remove permitted-development rights, so shared original features across the terraces stay under planning control.The 18th-century cottages around Kew Green retain a high proportion of original detail — exposed timber sash frames and yellow stock brick — that the council resists altering.Central Richmond's conservation area runs along the George Street, Hill Street and Kew Road frontages, where the tight town-centre grain limits the scope for visible extensions.

Planning in Richmond (TW9): what to know before you apply

TW9 houses commonly sit inside the Kew Green, Richmond Green or Central Richmond conservation areas, and streets like Cambridge Cottages carry Article 4 directions — plan for front elevations, windows and roofs to need full planning permission rather than permitted development.

Typical Richmond housing stock

Georgian yellow-brick cottages and townhouses around Kew Green and Richmond Green, with later Victorian and Edwardian terraces filling out the Kew Gardens and Lawn Crescent streets.

Streets we regularly draw for in Richmond

Kew Green · Cambridge Cottages · Lawn Crescent · Kew Foot Road · George Street · Kew Road

What TW9 is actually built of

Measured from 349 classified residential buildings in TW9, not from a description of the area.

Richmond TW9 housing mix

Residential building form across the TW9 postcode district, from 349 classified buildings.

Attached on more than one side	47%
Attached on one side	42%
Detached	10%
Median building footprint	71 m²
Addresses per buildingAbove about 2 means flats and maisonettes dominate	1.67
Buildings classified	349

Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-08-17.

Architectural Drawings for Richmond (TW9) homes: the package and the process

The full architectural package has to serve three audiences that want different things from the same building. Planning officers want context, massing and materials; Building Control wants construction, insulation and fire strategy; your builder wants dimensions precise enough to price and set out from. One coordinated model behind all three keeps them agreeing with each other.

That coordination is the part clients notice later. When the planning set and the construction set are drawn from separate sources, the discrepancies surface on site — a beam that will not fit the approved roof line, a window head that has moved. We issue numbered, revision-controlled sheets so everyone is building from the same version.

Building form also sets how much design work there is to do. A detached house can usually take an addition on its own terms, while a terrace has to negotiate two party walls, a shared roof line and a neighbour's windows — the same brief, several times the coordination.

What do architectural drawings include?

A complete architectural package carries your project from idea to buildable detail, so builders quote accurately and councils and Building Control approve confidently.

Concept and feasibility sketches
Planning drawings for the local authority
Building regulations drawings with construction detail
Structural drawings and calculations
Schedules, specifications and material annotations

Architect or architectural technologist — which do I need in London?

For residential planning and building regulations work, an MCIAT-chartered technologist produces the same council-accepted drawings with the same professional accountability as an architect, typically at a lower fee. Councils do not score applications by the author's job title — they score the drawings. The table below compares the two on the factors homeowners actually care about.

What are the stages of an architectural drawing package?

A full architectural package moves through clear stages, each producing drawings you own and can act on. You can stop at any stage — many homeowners take a project to planning approval first, then commission the technical package once they are ready to build.

Concept and feasibility

Sketch options that test what your budget, plot and borough will allow, so you commit to a direction before detailed drawing begins.

Planning drawings

The scaled existing and proposed set your council assesses — floor plans, elevations, sections and site plans formatted to the borough's validation checklist.

Building regulations drawings

The construction-level package: sections, junction details, structural calculations and thermal and fire specification for Building Control.

Construction detail

The final layer of detail and schedules your builder prices and works from on site.

Chartered architectural technologist vs traditional architect for a London home project
Factor	Architectural Technologist	Architect
Council-accepted drawings	Yes	Yes
Typical fee	~30% lower	Higher
Structural coordination	In-house	Often outsourced
Typical drawing turnaround	~7 days	Several weeks
Best for	Extensions, lofts, conversions	Bespoke new-build design

Sheet from a architectural drawings package drawn for a Richmond property in TW9, showing the existing and proposed arrangement at scale — A sheet from the architectural drawings package we submit to London Borough of Richmond upon Thames for Richmond (TW9) properties.

Also in Richmond TW9

Planning Permission Planning Drawings Building Regulations Drawings Loft Conversion Drawings House Extension Drawings Architectural Drawings across Richmond Architectural Drawings across London

FAQ

Architectural Drawings in Richmond TW9 — FAQs

Are architectural drawings the same as planning drawings?+

Planning drawings are a subset of the architectural package — the drawings used specifically for a planning application. The architectural drawings also include building regulations and construction detail.

Will a technologist's drawings be accepted by my council?+

Yes. MCIAT-chartered technologists are a recognised professional body and their drawings are routinely accepted and approved by every London borough.

Can you take my project all the way to construction?+

Yes — from feasibility through planning, building regulations and structural detail, to a set your builder can price and build from.

Do I own the architectural drawings you produce?+

Yes. The drawings are yours to use, and any competent builder can price and build from them — you are never locked into a single contractor by the drawing package.

Can I commission just the planning stage for now?+

Yes. Many homeowners take a project to planning approval first and add the building regulations and construction package later. We stage the fee to match, so you only pay for the stage you need.

Do I need planning permission for an extension in Richmond?+

More often than in most boroughs, yes. Richmond has some of the most extensive Article 4 coverage in London, so permitted development cannot be assumed even for modest works — many conservation areas such as Richmond Green, Teddington and Kew Green require a full application. We confirm the exact designation for your address first and design accordingly rather than relying on permitted development.

My Richmond home is near the river — does flood risk affect my application?+

It can. Much of the borough lies within the Thames flood zone, and the council expects flood-risk considerations to be addressed for works near the river in Twickenham, Richmond and Hampton. We evidence flood-risk and finished-floor-level considerations within the application so the council can validate and approve without repeated revisions.

What does Richmond's Article 4 coverage mean in practice?+

Article 4 directions remove permitted development rights across many of Richmond's conservation areas, so alterations that would be automatic elsewhere — dormers, cladding, some rear works — need a full householder application here. We design context-led drawings that respond to the borough's period townscape and river frontage, which is what carries an application to consent in Richmond.

How long does Richmond Council take to decide?+

Richmond determines most householder applications within the statutory eight-week period once validated, though conservation and riverside cases can attract additional consultation. Because so much turns on design detail here, we prepare submissions to the validation checklist with the elevations and materials the council expects, to avoid drawing queries.

How much do planning drawings cost in Richmond?+

We agree a fixed fee before starting, typically around 30% below an architect's fee for the same council-accepted drawings, with free redraws until Richmond approves. Conservation and flood-zone cases require more evidence than a standard extension, so we quote once we understand your address and scheme rather than by the hour.

Free Fixed Quote

Get your free Richmond planning assessment

Tell us your Richmond (TW9) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.