Mansard Loft Conversion Drawings in Kenton HA3
Fixed-fee, MCIAT-chartered mansard loft conversion drawings for Kenton (HA3) homeowners — London Borough of Harrow validation and local constraints handled from the start.
Kenton (HA3) is a 1930s semi-detached suburb straddling the Harrow–Brent border, where the everyday project is a rear kitchen extension, a hip-to-gable or L-shaped dormer loft, or a two-storey side extension that adds a bedroom while keeping the interwar frontage in proportion.
Around the Mount Stewart and Northwick Circle conservation areas we take extra care with roof form, materials and the building line, and we always confirm whether an address falls to Harrow Council so the application is validated first time.
Planning in Kenton (HA3): what to know before you apply
No published householder Article 4 direction, though the Mount Stewart and Northwick Circle conservation areas curb some permitted-development rights; the main watch-points are matching the semi-detached roofline and confirming the correct authority near the Harrow/Brent boundary.
Typical Kenton housing stock
Interwar semi-detached and short terraced houses laid out as a 1930s suburb straddling the Harrow and Brent border, typically with bay windows, hipped roofs and off-street parking. Plots are regular with modest-to-generous rear gardens well suited to single-storey additions.
Streets we regularly draw for in Kenton
The Ridgeway · Draycott Avenue · Windermere Avenue · Northwick Circle
What HA3 is actually built of
Measured from 245 classified residential buildings in HA3, not from a description of the area.
Kenton HA3 housing mix
Residential building form across the HA3 postcode district, from 245 classified buildings.
| Attached on more than one side | 41% |
|---|---|
| Attached on one side | 51% |
| Detached | 9% |
| Median building footprint | 72 m² |
| Addresses per buildingAbove about 2 means flats and maisonettes dominate | 1.18 |
| Buildings classified | 245 |
Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-08-17.
Mansard Loft Conversion Drawings for Kenton (HA3) homes: the package and the process
A mansard is a rebuild of the roof, so the drawings carry more structure than a dormer scheme: the new front and rear slopes with their pitch angles set out, the upstand and party wall junctions, the parapet and gutter detail, and a street-scene elevation showing the new roof against its neighbours.
That street scene usually decides the application. Where a terrace already has approved mansards, the drawing shows the new roof matching their line, pitch and window rhythm; where it would be the first, the case is made on the roof form itself. Either way the argument is drawn, not written.
Mansards belong to terraces and to parapeted stock. The form works because a near-vertical rear wall can rise off the party walls and sit behind a parapet, which is why it is the usual answer in tightly controlled streets and rarely the right answer on a detached house.
What is a mansard loft conversion?
A mansard replaces the rear roof slope — or, less commonly, the front and rear slopes together — with a new near-vertical wall rising from the party walls to a shallow flat roof at the ridge, with small dormer windows set into it. Unlike a dormer, which sits within the existing roof, a mansard changes the shape of the roof itself, which is why it is usually reserved for terraces where the extra headroom and floor area are worth the more involved planning and construction process. Because the new wall runs almost the full width of the house between the party walls, a mansard typically delivers noticeably more usable floor area than a single dormer of any kind, which is why it remains the preferred option on period terraces where every square metre of loft counts.
Does a mansard loft conversion need planning permission in London?
Yes, almost always. Permitted development rights for roof alterations are volume- and shape-limited, and a mansard goes well beyond what those limits allow because it materially alters the roof's profile rather than adding to it. Every mansard we draw is prepared as a full householder planning application, with a design and access statement where the borough requires one, so the council can properly assess the change to the roofline and its impact on neighbours and the street scene.
Why do conservation areas favour mansards?
Many London conservation areas already contain mansard roofs as part of the original streetscape — grand Georgian and Victorian terraces were frequently built with a mansard attic storey behind a parapet, so a matching modern mansard often reads as a restoration of the intended roofline rather than an alteration. Getting that read right depends on matching the existing slate or tile colour, the proportion and spacing of the dormer windows, and the eaves and parapet detailing of the host terrace — details we design in from the first drawing rather than treating as an afterthought.
- Slate or tile colour and coursing matched to the existing roof and neighbouring properties
- Dormer window proportions and spacing aligned to the terrace's existing rhythm
- Eaves, parapet and party wall junctions detailed to sit flush with neighbouring roofs
| Package | Scope | Planning route | Fee from |
|---|---|---|---|
| Rear mansard, planning only | Design, planning drawings and supporting statement | Householder planning | £1,600 |
| Rear mansard, planning and building regs | Planning drawings plus structural and Part L detailing | Householder planning | £2,200 |
| Front and rear mansard | Full roof rebuild on both slopes, with structural | Householder planning | £2,400 |
Mansard Loft Conversion Drawings in Kenton HA3 — FAQs
How much do mansard loft conversion drawings cost in London?+
Can a mansard ever be permitted development?+
How long do mansard drawings take?+
Will a mansard need scaffolding and affect the whole roof?+
Do you handle the party wall process as well as the drawings?+
Do I need planning permission for a loft conversion in Harrow?+
What does Harrow expect for a rear extension on a 1930s semi?+
Can I extend a home in Harrow on the Hill or Pinner?+
How long does Harrow Council take to decide?+
How much do planning drawings cost in Harrow?+
Get your free Kenton planning assessment
Tell us your Kenton (HA3) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.