House Extension Drawings in Wealdstone HA3
Fixed-fee, MCIAT-chartered house extension drawings for Wealdstone (HA3) homeowners — London Borough of Harrow validation and local constraints handled from the start.
Wealdstone (HA3) is defined by its origins as a Victorian and Edwardian railway-and-industrial town, which grew around the London & North Western Railway and major factories including the Kodak plant that opened in 1891, Winsor & Newton and Whitefriars Glass. That history left dense terraced worker housing close to the old factory sites, so most householder projects here are extensions, side returns and lofts on tightly planned terraces.
There is no conservation area covering Wealdstone — that is a genuine, verified fact, not an omission. Its planning character is instead shaped by the repeating grain of its terraced streets and by the London Borough of Harrow's householder design expectations, which favour keeping the original terrace rhythm, brickwork and roofline intact. We treat that terraced cohesion, rather than a conservation designation, as the reference point when we design an extension.
Demand for rear extensions, side infills and loft conversions is steady across streets like Adderley Road, Hibbert Road and Canning Road, where compact frontages and long gardens are typical. We check each property's permitted-development position against Harrow's borough-wide controls first, then prepare drawings that either stay within permitted development or are ready to validate as a full householder application.
Planning in Wealdstone (HA3): what to know before you apply
Because Wealdstone's terraces repeat so consistently, Harrow assess extensions against the established street pattern, so matching original brick, render detail and roof form matters more than on a mixed-typology road. There is no conservation area and no local Article 4 direction, so many houses retain permitted development rights for rear and loft work — but the narrow frontages and shared party walls mean depth, height and neighbour impact are the points a householder application is judged on.
Typical Wealdstone housing stock
Victorian and Edwardian terraced worker housing built close to the former factory sites and the railway, with narrow frontages and long rear gardens, alongside interwar semi-detached houses on the outer roads. These compact terraces are what drives the steady flow of rear-extension, side-return and loft-conversion work across the district.
Streets we regularly draw for in Wealdstone
The Greenway · The Broadway · Montrose Road · Risingholme Road · The Bye Way · Adderley Road · Fisher Road · Hibbert Road · Aberdeen Road · Lorne Road · Canning Road · Wellington Road
What HA3 is actually built of
Measured from 245 classified residential buildings in HA3, not from a description of the area.
Wealdstone HA3 housing mix
Residential building form across the HA3 postcode district, from 245 classified buildings.
| Attached on more than one side | 41% |
|---|---|
| Attached on one side | 51% |
| Detached | 9% |
| Median building footprint | 72 m² |
| Addresses per buildingAbove about 2 means flats and maisonettes dominate | 1.18 |
| Buildings classified | 245 |
Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-08-17.
House Extension Drawings for Wealdstone (HA3) homes: the package and the process
Extension drawings are read for their dimensions. The proposed plan needs depth measured from the original rear wall — not from a previous extension — eaves and ridge heights taken from existing ground level, and the distance to each boundary marked. A site plan showing how much garden remains is what an officer reaches for when the amenity question comes up.
We draw the existing building accurately first, because everything else is measured from it. Where the original footprint has already been added to, that history goes on the drawing: it decides which allowances are still available and it is the first thing an officer checks against the council's own records.
The plot decides the extension type long before taste does. A mid-terrace has depth to work with and an alley if it is lucky; a semi has one clear flank; a detached house can go wide. Reading the building form first is what stops a design being drawn that the plot cannot take.
Which extension types do you draw?
Every London extension is shaped by the plot, the neighbours and the borough's design guidance. We draw them all.
Rear extension
A single-storey rear extension is often permitted development within depth limits — ideal for an open-plan kitchen-diner.
Side-return
Fills the alley beside a Victorian terrace, widening the ground floor without losing garden.
Wraparound
Combines a rear and side-return extension for a transformative ground floor, usually needing planning permission.
Double-storey
Adds space above and below, subject to tighter scale and neighbour-impact scrutiny.
Basement
Creates space downward where footprint is limited, with structural and party-wall care.
Do I need planning permission for a house extension in London?
Single-storey rear extensions within permitted development limits (up to 6m for terraced/semi-detached homes under the larger-home scheme, subject to neighbour consultation) may not need a full application. Wraparounds, double-storeys and anything in a conservation area usually do. We assess your plot and recommend the right route before drawing. The current depth, height and eaves limits are set out in full in the guide to planning permission for a rear extension, and where you would rather one practice ran the design, the application and the building-regulations stage together, Architectural Drawings covers that full scope.
How do you maximise the footprint the council will approve?
We know each borough's depth, height and daylight standards, so we design to the edge of what will be approved rather than guessing — and we check the 45-degree neighbour daylight rule and any rear building line before submission. Where a plot is tight we test a permitted-development scheme against a slightly larger householder application and show you the trade-off in space, cost and timescale, so the drawn scheme is the one that actually maximises value rather than just floor area.
| Extension | Typical route | Package | Fee from |
|---|---|---|---|
| Single-storey rear | Permitted development / householder | Planning + building regs | £1,100 |
| Side-return | Householder planning | Planning + building regs + structural | £1,600 |
| Wraparound | Householder planning | Full package + structural | £2,200 |
| Double-storey | Householder planning | Full package + structural | £2,400 |
House Extension Drawings in Wealdstone HA3 — FAQs
How far can I extend without planning permission in London?+
Do extension drawings include structural calculations?+
How long do extension drawings take?+
Will my rear extension need a party wall agreement?+
Can I extend a house in a conservation area?+
Do I need planning permission to extend a house in Wealdstone?+
Is Wealdstone in a conservation area?+
How much do planning and building-regulation drawings cost for a Wealdstone extension?+
How long does Harrow Council take to decide?+
Get your free Wealdstone planning assessment
Tell us your Wealdstone (HA3) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.