House Extension Drawings in Custom House E16
Fixed-fee, MCIAT-chartered house extension drawings for Custom House (E16) homeowners — London Borough of Newham validation and local constraints handled from the start.
Custom House (E16) grew as Victorian dock-worker housing around the Royal Victoria Dock, which opened in 1855, and now sits inside the Royal Docks regeneration and Enterprise Zone. Surviving and postwar-rebuilt terraces sit alongside major new-build development around the ExCeL and the Elizabeth line, so householder work here is largely extensions and lofts on the terraced houses that line the residential streets.
There is no conservation area covering the Custom House part of E16 — that is a genuine, verified fact, not an omission. Its planning character is instead shaped by the working dockside terraced grain and the surrounding regeneration, and by the London Borough of Newham's householder design expectations, which lean on keeping original building lines, materials and roof continuity intact. We treat that terraced character, rather than a conservation designation, as the reference point when we design an extension.
Demand for rear extensions and loft conversions runs steadily across residential streets like Tollgate Road, Rogers Road and Chadwin Road, where compact terraced houses sit on modest plots. We check each property's permitted-development position against Newham's borough-wide controls first — and any surface-water drainage points given the low-lying dockside land — then prepare drawings that either stay within permitted development or are ready to validate as a full householder application.
Planning in Custom House (E16): what to know before you apply
Because Custom House is a dockside mix of surviving and rebuilt terraces set within the Royal Docks regeneration area, Newham assess extensions against the prevailing rhythm and building line of the individual residential street, so matching original brick, roof continuity and neighbour relationships matters alongside the numbers. There is no conservation area and no local Article 4 direction in the Custom House part of E16, so many terraced houses retain permitted development rights for rear and loft work — but compact plots, shared party walls and low-lying land mean depth, height, neighbour impact and drainage are the points a householder application is judged on.
Typical Custom House housing stock
A mix of surviving and postwar-rebuilt terraced housing with substantial new-build apartments across the Royal Docks regeneration area. It is the terraced houses on the residential streets, rather than the apartment blocks, that generate most of the rear-extension and loft-conversion work here.
Streets we regularly draw for in Custom House
Barrier Point Road · Tollgate Road · Rayleigh Road · Wesley Avenue · Rogers Road · Ruscoe Road · Egham Road · Chadwin Road · Cranley Road · Selby Road · Caraway Close · Eclipse Road
What E16 is actually built of
Measured from 274 classified residential buildings in E16, not from a description of the area.
Custom House E16 housing mix
Residential building form across the E16 postcode district, from 274 classified buildings.
| Attached on more than one side | 68% |
|---|---|
| Attached on one side | 27% |
| Detached | 4% |
| Median building footprint | 50 m² |
| Addresses per buildingAbove about 2 means flats and maisonettes dominate | 2.42 |
| Buildings classified | 274 |
Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-08-17.
House Extension Drawings for Custom House (E16) homes: the package and the process
Extension drawings are read for their dimensions. The proposed plan needs depth measured from the original rear wall — not from a previous extension — eaves and ridge heights taken from existing ground level, and the distance to each boundary marked. A site plan showing how much garden remains is what an officer reaches for when the amenity question comes up.
We draw the existing building accurately first, because everything else is measured from it. Where the original footprint has already been added to, that history goes on the drawing: it decides which allowances are still available and it is the first thing an officer checks against the council's own records.
The plot decides the extension type long before taste does. A mid-terrace has depth to work with and an alley if it is lucky; a semi has one clear flank; a detached house can go wide. Reading the building form first is what stops a design being drawn that the plot cannot take.
Which extension types do you draw?
Every London extension is shaped by the plot, the neighbours and the borough's design guidance. We draw them all.
Rear extension
A single-storey rear extension is often permitted development within depth limits — ideal for an open-plan kitchen-diner.
Side-return
Fills the alley beside a Victorian terrace, widening the ground floor without losing garden.
Wraparound
Combines a rear and side-return extension for a transformative ground floor, usually needing planning permission.
Double-storey
Adds space above and below, subject to tighter scale and neighbour-impact scrutiny.
Basement
Creates space downward where footprint is limited, with structural and party-wall care.
Do I need planning permission for a house extension in London?
Single-storey rear extensions within permitted development limits (up to 6m for terraced/semi-detached homes under the larger-home scheme, subject to neighbour consultation) may not need a full application. Wraparounds, double-storeys and anything in a conservation area usually do. We assess your plot and recommend the right route before drawing. The current depth, height and eaves limits are set out in full in the guide to planning permission for a rear extension, and where you would rather one practice ran the design, the application and the building-regulations stage together, Architectural Drawings covers that full scope.
How do you maximise the footprint the council will approve?
We know each borough's depth, height and daylight standards, so we design to the edge of what will be approved rather than guessing — and we check the 45-degree neighbour daylight rule and any rear building line before submission. Where a plot is tight we test a permitted-development scheme against a slightly larger householder application and show you the trade-off in space, cost and timescale, so the drawn scheme is the one that actually maximises value rather than just floor area.
| Extension | Typical route | Package | Fee from |
|---|---|---|---|
| Single-storey rear | Permitted development / householder | Planning + building regs | £1,100 |
| Side-return | Householder planning | Planning + building regs + structural | £1,600 |
| Wraparound | Householder planning | Full package + structural | £2,200 |
| Double-storey | Householder planning | Full package + structural | £2,400 |
House Extension Drawings in Custom House E16 — FAQs
How far can I extend without planning permission in London?+
Do extension drawings include structural calculations?+
How long do extension drawings take?+
Will my rear extension need a party wall agreement?+
Can I extend a house in a conservation area?+
Do I need planning permission to extend a house in Custom House?+
Is Custom House in a conservation area?+
How much do planning and building-regulation drawings cost for a Custom House extension?+
How long does Newham Council take to decide?+
Get your free Custom House planning assessment
Tell us your Custom House (E16) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.