House Extension Drawings in Belvedere DA17
Fixed-fee, MCIAT-chartered house extension drawings for Belvedere (DA17) homeowners — London Borough of Bexley validation and local constraints handled from the start.
Belvedere in DA17 is a mixed outer south-east suburb by the Thames marshes, blending Victorian terraces, interwar semis and post-war housing. The everyday work here is rear extensions, loft conversions and side-return infills on unlisted family homes that typically sit within permitted development.
The conservation areas along Woolwich Road and Erith Road, plus the low-lying riverside setting, mean design control and flood risk both need care, so we detail schemes near those frontages and on lower plots to the standard London Borough of Bexley expects while keeping ordinary suburban projects efficient.
Planning in Belvedere (DA17): what to know before you apply
No published householder Article 4 direction applies in Belvedere; the main constraints are the Woolwich Road and Erith Road conservation areas and flood risk on lower riverside plots. Most Victorian, interwar and post-war houses away from designated frontages retain normal permitted development rights.
Typical Belvedere housing stock
Belvedere is an outer south-east suburb beside the Thames marshes with a mix of Victorian terraces, interwar semis and post-war housing on gently rising ground. Most homes are unlisted family houses with rear gardens, well suited to rear extensions, loft conversions and side infills that generally fall within permitted development.
Streets we regularly draw for in Belvedere
Kingswood Avenue · Napier Road · Ripley Road · Battle Road
What DA17 is actually built of
Measured from 266 classified residential buildings in DA17, not from a description of the area.
Belvedere DA17 housing mix
Residential building form across the DA17 postcode district, from 266 classified buildings.
| Attached on more than one side | 47% |
|---|---|
| Attached on one side | 46% |
| Detached | 8% |
| Median building footprint | 56 m² |
| Addresses per buildingAbove about 2 means flats and maisonettes dominate | 1.3 |
| Buildings classified | 266 |
Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-08-17.
House Extension Drawings for Belvedere (DA17) homes: the package and the process
Extension drawings are read for their dimensions. The proposed plan needs depth measured from the original rear wall — not from a previous extension — eaves and ridge heights taken from existing ground level, and the distance to each boundary marked. A site plan showing how much garden remains is what an officer reaches for when the amenity question comes up.
We draw the existing building accurately first, because everything else is measured from it. Where the original footprint has already been added to, that history goes on the drawing: it decides which allowances are still available and it is the first thing an officer checks against the council's own records.
The plot decides the extension type long before taste does. A mid-terrace has depth to work with and an alley if it is lucky; a semi has one clear flank; a detached house can go wide. Reading the building form first is what stops a design being drawn that the plot cannot take.
Which extension types do you draw?
Every London extension is shaped by the plot, the neighbours and the borough's design guidance. We draw them all.
Rear extension
A single-storey rear extension is often permitted development within depth limits — ideal for an open-plan kitchen-diner.
Side-return
Fills the alley beside a Victorian terrace, widening the ground floor without losing garden.
Wraparound
Combines a rear and side-return extension for a transformative ground floor, usually needing planning permission.
Double-storey
Adds space above and below, subject to tighter scale and neighbour-impact scrutiny.
Basement
Creates space downward where footprint is limited, with structural and party-wall care.
Do I need planning permission for a house extension in London?
Single-storey rear extensions within permitted development limits (up to 6m for terraced/semi-detached homes under the larger-home scheme, subject to neighbour consultation) may not need a full application. Wraparounds, double-storeys and anything in a conservation area usually do. We assess your plot and recommend the right route before drawing. The current depth, height and eaves limits are set out in full in the guide to planning permission for a rear extension, and where you would rather one practice ran the design, the application and the building-regulations stage together, Architectural Drawings covers that full scope.
How do you maximise the footprint the council will approve?
We know each borough's depth, height and daylight standards, so we design to the edge of what will be approved rather than guessing — and we check the 45-degree neighbour daylight rule and any rear building line before submission. Where a plot is tight we test a permitted-development scheme against a slightly larger householder application and show you the trade-off in space, cost and timescale, so the drawn scheme is the one that actually maximises value rather than just floor area.
| Extension | Typical route | Package | Fee from |
|---|---|---|---|
| Single-storey rear | Permitted development / householder | Planning + building regs | £1,100 |
| Side-return | Householder planning | Planning + building regs + structural | £1,600 |
| Wraparound | Householder planning | Full package + structural | £2,200 |
| Double-storey | Householder planning | Full package + structural | £2,400 |
House Extension Drawings in Belvedere DA17 — FAQs
How far can I extend without planning permission in London?+
Do extension drawings include structural calculations?+
How long do extension drawings take?+
Will my rear extension need a party wall agreement?+
Can I extend a house in a conservation area?+
Do I need planning permission for an extension in Bexley?+
Can I build a bigger extension because Bexley plots are larger?+
What extra control applies in Old Bexley Village or around Danson Park?+
How long does Bexley Council take to decide?+
How much do planning drawings cost in Bexley?+
Get your free Belvedere planning assessment
Tell us your Belvedere (DA17) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.