MCIAT chartered drawings · Fixed fees across all 33 London boroughs

Free 2026 London Planning ReportHMO Conversion Drawings in Bow E3

Georgian house conversion drawings near Tredegar Square in Bow E3, London Borough of Tower Hamlets
Bow · E3 · Tower Hamlets

HMO Conversion Drawings in Bow E3

Fixed-fee, MCIAT-chartered hmo conversion drawings for Bow (E3) homeowners — London Borough of Tower Hamlets validation and local constraints handled from the start.

Free Bow planning assessment

Tell us your Bow (E3) address and project. A fixed quote and free planning appraisal land within one working day.

No obligation · No spam · Reply within 1 working day

Bow (E3) in Tower Hamlets is defined by Tredegar Square — the most complete Georgian square in the East End, and the reason a substantial share of E3 householder work is governed by listed building consent rather than permitted development. The surrounding stock is largely Victorian terrace along Bow Road and the Roman Road, with post-war estates filling the gaps.

The Tredegar Square conservation area closely controls frontages, railings and rooflines, and many of the houses in and around the square are listed, which means external alterations need listed building consent alongside planning. Fairfield Road covers the historic industrial frontages including the former Bryant and May match factory, where conversion schemes are assessed against that industrial character, and the Tower Hamlets Cemetery conservation area brings tree protection and setting considerations to the streets nearby. We check listing and designation for an E3 address before drawing to Tower Hamlets' guidance.

Georgian house conversion drawings near Tredegar Square in Bow E3, London Borough of Tower Hamlets
Isometric illustration of a Bow E3 home hmo conversion drawings design
Proposed floor plan
Bow E3

Planning in Bow (E3): what to know before you apply

E3 has no householder Article 4 direction, so unlisted Bow houses outside the conservation areas retain permitted development rights for rear and loft work. The controls that matter are elsewhere: Tredegar Square is a substantially complete Georgian square where many houses are listed and listed building consent governs external alterations; Fairfield Road protects the historic industrial frontages including the former match factory; and the Tower Hamlets Cemetery conservation area adds tree and setting considerations to the surrounding streets.

Typical Bow housing stock

Georgian terraces around Tredegar Square — the most complete Georgian square in the East End — with Victorian terraces along the Roman Road and Bow Road, and post-war estates between them.

Streets we regularly draw for in Bow

Bow Road · Roman Road · Tredegar Square · Fairfield Road

What E3 is actually built of

Measured from 396 classified residential buildings in E3, not from a description of the area.

Bow E3 housing mix

Residential building form across the E3 postcode district, from 396 classified buildings.

Attached on more than one side78%
Attached on one side16%
Detached5%
Median building footprint53 m²
Addresses per buildingAbove about 2 means flats and maisonettes dominate4.49
Buildings classified396

Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-08-17.

HMO Conversion Drawings for Bow (E3) homes: the package and the process

An HMO scheme is drawn against a schedule. Every bedroom is dimensioned with its usable floor area stated, shared kitchen and bathroom provision is counted against the number of occupants, and the layout has to hold up against the space standards the licensing team applies.

The fire strategy is drawn, not described: protected escape route, fire doors and their ratings, alarm coverage by room, and compartmentation between floors. Licensing and building control assess the same drawing set from different angles, so it has to satisfy both without contradiction.

Room count is a function of the existing plan. A large semi or detached house with generous rooms can meet the space standards without subdivision, while a narrow terrace usually cannot reach the same occupancy without creating rooms that fall below the minimum floor area.

C4 small HMO or sui generis large HMO — which applies to your property?

The distinction matters because it decides which rules apply. A small HMO housing three to six unrelated sharers who share amenities is Class C4. A large HMO of seven or more occupants is sui generis and always needs planning permission, since sui generis uses sit outside the permitted development system entirely. The line also shifts with occupancy — a property let to six sharers today can tip into sui generis territory the moment a seventh tenancy is signed, which changes the planning position even though nothing about the building itself has changed. We assess your proposed occupancy and layout against both definitions before drawing, so the application matches how the property will actually be let.

Do I need planning permission for an HMO conversion in London?

Converting a family home (C3) into a small HMO (C4) is technically permitted development under national rules, but a large number of London boroughs have made an Article 4 direction that removes this right across all or part of the borough — meaning a full planning application is required even for a small, compliant HMO. Article 4 directions vary street by street in some boroughs, so two similar houses a few doors apart can sit on opposite sides of the line. Any large HMO (sui generis) needs planning permission everywhere, regardless of Article 4. We check your specific address against the relevant borough's Article 4 direction before recommending a route, since guessing wrong wastes both time and application fees.

Mandatory and additional HMO licensing — what's required?

Most HMOs need a licence from the council, separate from any planning permission. A licence application typically has to demonstrate that the property meets fire safety, amenity and space standards, that gas and electrical installations are safety-certified, and that the landlord or managing agent is a fit and proper person to hold it.

Mandatory licensing

Applies to any HMO of five or more occupants forming two or more households, regardless of the number of storeys — a national requirement in every London borough.

Additional licensing

Many boroughs extend licensing to smaller HMOs, typically three or four occupants, across all or part of their area. We check the current scheme for your borough before you apply, since schemes and boundaries change.

HMO routes and standards in London
FactorC4 small HMO (3–6 sharers)Sui generis large HMO (7+)
Use classC4Sui generis
Planning permissionOften needed due to Article 4 directions in most boroughsAlways needed
LicensingMandatory if 5+ occupants; additional licensing in many boroughsMandatory
Typical drawing packageFrom £1,400Full planning + building regs, from £2,200
Sheet from a hmo conversion drawings package drawn for a Bow property in E3, showing the existing and proposed arrangement at scale
A sheet from the hmo conversion drawings package we submit to London Borough of Tower Hamlets for Bow (E3) properties.
FAQ

HMO Conversion Drawings in Bow E3 — FAQs

How much do HMO conversion drawings cost in London?+
HMO conversion packages typically start from £1,400, rising where full planning permission, structural work or a larger occupancy is involved. We agree a fixed fee upfront, before drawing begins.
Is HMO conversion permitted development in London?+
Only sometimes. Converting a home into a small HMO (C4) can be permitted development nationally, but many London boroughs have removed that right with an Article 4 direction, and any large HMO (seven or more occupants) always needs planning permission. We check your address before recommending a route.
Do I need a licence as well as planning permission?+
Usually yes. Licensing and planning permission are separate processes assessed by different council teams — most HMOs need a mandatory or additional licence regardless of whether planning permission was also required for the conversion.
Do I need an architect for an HMO conversion?+
No. As an MCIAT-chartered architectural technologist practice, we prepare the same council-accepted drawings an architect would, coordinated with structural and fire safety detail, typically at a lower fee.
How long do HMO conversion drawings take?+
Drawings are typically ready around 7 days from survey. Where full planning permission is needed, the council then has a statutory eight-week period to determine the application.
Do I need planning permission for an extension in Tower Hamlets?+
Frequently, yes. A high proportion of the borough sits within a conservation area — Spitalfields, Wapping Pierhead and Tredegar Square among them — where permitted development is removed. On unlisted homes outside a conservation area a rear extension may still qualify. We check your address against the designations first and can confirm permitted development with a Lawful Development Certificate where it qualifies.
My Tower Hamlets property is listed — what consent do I need?+
Listed-building consent is usually required alongside or instead of planning permission, and internal as well as external changes can be controlled. The Georgian terraces around Spitalfields carry a high density of listed buildings. We screen listing status for your address first and prepare the heritage-led drawings and justification the council expects.
Can you handle a warehouse or riverside conversion in Wapping or Limehouse?+
Yes. The Wapping and Limehouse riverside carries its own townscape, conservation and flood-zone context, and conversions there are assessed against design control near the Thames. We prepare drawings that respond to that setting and evidence the flood-risk considerations, confirming the constraints for your specific building before design begins.
How long does Tower Hamlets Council take to decide?+
Tower Hamlets determines most householder applications within the statutory eight-week period once validated; listed-building, conservation and riverside cases can involve additional consultation. We prepare submissions to the council's validation and design standards to avoid the drawing queries that cause most delays.
How much do planning drawings cost in Tower Hamlets?+
We agree a fixed fee before we start, typically around 30% below an architect's fee for the same council-accepted drawings, with free redraws until the council approves. A conservation-area extension, a listed-building scheme and a riverside conversion differ in the evidence required, so we quote once we have seen your address and project rather than by the hour.
Free Fixed Quote

Get your free Bow planning assessment

Tell us your Bow (E3) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.