Hip-to-Gable Loft Conversion Drawings in West Kensington W14
Fixed-fee, MCIAT-chartered hip-to-gable loft conversion drawings for West Kensington (W14) homeowners — London Borough of Hammersmith & Fulham validation and local constraints handled from the start.
West Kensington (W14) is defined by its red-brick Victorian mansion flats — the Gunter family developed much of the district as planned mansion-block and terrace streets, and a large share of the housing is now flats rather than whole houses. That tenure shapes every project: rear, roof and party-wall work here typically touches more than one household.
The Gunter Estate, Barons Court and Sinclair Road conservation areas cover much of the district and protect that planned red-brick character. We establish the conservation boundary, the tenure and the block's shared elements before recommending a route, and draw to the borough's guidance.
Planning in West Kensington (W14): what to know before you apply
W14 sits across the Gunter Estate, Barons Court and Sinclair Road conservation areas, which protect the planned red-brick mansion-flat streets and remove permitted development rights on many of them — and because so much of the stock is flatted, extensions and loft work are assessed against shared roofs, rear elevations and party walls as well as conservation character. London Borough of Hammersmith and Fulham does not publish an Article 4 schedule to the national open-data register, so an empty entry there is not evidence of absence — we confirm the current directions with the council before advising.
Typical West Kensington housing stock
Red-brick late-Victorian mansion flats and tall terraced houses laid out by the Gunter estate, many now subdivided into flats, with further mansion blocks toward Barons Court.
Streets we regularly draw for in West Kensington
Gunterstone Road · Comeragh Road · Gledstanes Road · Sinclair Road · North End Road
What W14 is actually built of
Measured from 412 classified residential buildings in W14, not from a description of the area.
West Kensington W14 housing mix
Residential building form across the W14 postcode district, from 412 classified buildings.
| Attached on more than one side | 78% |
|---|---|
| Attached on one side | 19% |
| Detached | 3% |
| Median building footprint | 74 m² |
| Addresses per buildingAbove about 2 means flats and maisonettes dominate | 3.83 |
| Buildings classified | 412 |
Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-08-17.
Hip-to-Gable Loft Conversion Drawings for West Kensington (W14) homes: the package and the process
The hip-to-gable case is made on the end elevation. The drawings show the existing hipped roof and the proposed gable side by side at the same scale, with the new brickwork or tile hanging set out, the ridge extended to its new length, and the junction with any neighbouring roof made explicit.
Because the work changes the roof at the boundary, the section and the end elevation also have to show the party wall line and how the new gable is built off it. Where the property is one of a pair, we draw the neighbouring roof too — an officer assessing the effect on the pair needs to see both.
The conversion needs a hip to work on, which limits it to semi-detached, detached and end-of-terrace houses — a mid-terrace has no hipped end to rebuild. On a semi, the new gable also has to be drawn against the neighbour's roof, since the pair was designed to read as one.
What is a hip-to-gable loft conversion?
A hipped roof slopes inward on all sides, including the end wall, rather than finishing in a flat vertical gable. A hip-to-gable conversion rebuilds that sloping hip as a vertical wall, in line with the existing side elevation below, squaring off the roof shape and creating a much larger, more usable loft footprint along that side without altering the rear or front roof slopes at all. It is one of the more straightforward roof alterations to build, because the new gable wall follows the line of the existing external wall rather than introducing a new roof form, which keeps both the design and the construction relatively contained compared with a full mansard rebuild.
- Suits semi-detached and end-of-terrace houses with a hipped roof on the side elevation
- Squares off the roof by rebuilding the sloping hip as a vertical gable wall
- Leaves the front and rear roof slopes untouched
Is a hip-to-gable loft conversion permitted development?
Often, yes. For semi-detached and detached houses, permitted development rules allow more than one hip to be converted to a gable, provided the new roof does not exceed the height of the existing ridge and the total additional volume stays within the usual allowance — 50 cubic metres for detached and semi-detached homes. The new gable wall and roof materials should match the existing building, and the rules tighten or disappear entirely inside a conservation area or under an Article 4 direction, both of which we check before recommending the route. Where a previous owner has already extended into the roof or added a large outbuilding, the remaining volume allowance can be smaller than expected, so we always confirm the running total against your specific property rather than assuming the full allowance is still available.
What is a hip-to-gable-plus-dormer conversion?
Combining a hip-to-gable conversion with a rear dormer is one of the most effective ways to maximise a loft on a semi-detached or end-of-terrace house: the gable squares off the side of the roof while the dormer adds headroom over the rear slope and stairwell, together often creating close to a full-width habitable floor. We assess both elements together from the first survey — see our dormer loft conversion page for how the rear element is designed — rather than drawing a hip-to-gable in isolation and bolting on a dormer later. Because both elements are often permitted development on their own, the combined scheme frequently still fits within the same volume allowance, though we always check the running total before confirming the route.
| Conversion | Typical route | Structural scope | Fee from |
|---|---|---|---|
| Hip-to-gable only | Permitted development / LDC | New gable wall and rafter tie-in | £1,300 |
| Hip-to-gable plus rear dormer | Permitted development / LDC where eligible | Gable wall plus dormer structure | £1,450 |
| Hip-to-gable in a conservation area | Householder planning | New gable wall and rafter tie-in | £1,600 |
Hip-to-Gable Loft Conversion Drawings in West Kensington W14 — FAQs
How much do hip-to-gable loft conversion drawings cost in London?+
Will my semi-detached house qualify for permitted development?+
How long do hip-to-gable drawings take?+
Do I need an architect for a hip-to-gable conversion?+
What building regulations apply to a hip-to-gable loft?+
Do I need planning permission for a side-return extension in Hammersmith & Fulham?+
Will I need a Basement Impact Assessment for a basement in Hammersmith & Fulham?+
What is special about the Peterborough Estate 'Lion houses'?+
How long does Hammersmith & Fulham take to decide?+
How much do planning drawings cost in Hammersmith & Fulham?+
Get your free West Kensington planning assessment
Tell us your West Kensington (W14) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.