Flat Conversion Drawings in Kentish Town NW5
Fixed-fee, MCIAT-chartered flat conversion drawings for Kentish Town (NW5) homeowners — London Borough of Camden validation and local constraints handled from the start.
Kentish Town (NW5) is predominantly Victorian, with two conservation areas — Dartmouth Park on the rising ground to the north and Inkerman in the streets off Kentish Town Road — and Camden's Article 4 layer over the top. It is a district where the difference between one street and the next genuinely changes the route to consent.
Camden's Basements direction removes permitted development rights for basement works throughout, so lower-ground schemes need a full application. The Class E to C3 direction, in its outside-the-CAZ form, removes the permitted commercial-to-residential change here — which matters along Kentish Town Road and Fortess Road, where the shop-to-flat conversion is a common project and now needs planning rather than prior approval. In the Dartmouth Park and Inkerman conservation areas, frontages and rooflines are controlled, and the rise toward Dartmouth Park Hill means rear extension levels and overlooking are assessed against the slope. We check the boundaries and the Article 4 position for an NW5 address before drawing to Camden's guidance.
Planning in Kentish Town (NW5): what to know before you apply
NW5 falls under Camden's Basements Article 4 direction, removing permitted development rights for basement works, and the outside-CAZ Class E to C3 direction, which removes the permitted commercial-to-residential change — so shop-to-flat conversions along Kentish Town Road and Fortess Road need full planning applications rather than prior approval. The Dartmouth Park and Inkerman conservation areas control frontages and rooflines, and the rising ground toward Dartmouth Park Hill brings level and overlooking assessments into rear extension design.
Typical Kentish Town housing stock
Victorian terraces through the centre and along Fortess Road, larger Victorian semi-detached and terraced houses climbing Dartmouth Park Hill, and a substantial share of the stock converted to flats.
Streets we regularly draw for in Kentish Town
Kentish Town Road · Fortess Road · Dartmouth Park Hill · Lady Margaret Road
What NW5 is actually built of
Measured from 371 classified residential buildings in NW5, not from a description of the area.
Kentish Town NW5 housing mix
Residential building form across the NW5 postcode district, from 371 classified buildings.
| Attached on more than one side | 68% |
|---|---|
| Attached on one side | 27% |
| Detached | 5% |
| Median building footprint | 66 m² |
| Addresses per buildingAbove about 2 means flats and maisonettes dominate | 2.43 |
| Buildings classified | 371 |
Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-08-17.
Flat Conversion Drawings for Kentish Town (NW5) homes: the package and the process
Converting a house into flats is drawn unit by unit. Each proposed flat needs its layout, its floor area, its own entrance arrangement and its amenity provision shown, along with refuse and cycle storage that meets the standards the council applies to new residential units.
The separation between units is the technical core: floors and walls detailed for fire resistance and sound insulation, a common escape route drawn and protected, and services routed without breaching the compartments. Those details go on the drawings because Building Control assesses them there, not on site.
Conversion suits buildings with the plan depth and stair position to make two workable units. A wide terrace or a large semi can usually be split without landlocking a room, while a narrow plan often cannot give both units light, access and separation at the same time.
Do I need planning permission to convert a house into flats?
Yes, always. Converting a single dwelling into two or more self-contained flats is a change from one home to several, and that subdivision is treated as development requiring a full planning application — there is no permitted development route that allows it, regardless of the property's size or whether the exterior changes at all. The application has to demonstrate that each flat meets space, layout, amenity and parking standards in its own right, not just that the building as a whole is being used sensibly.
Boroughs also weigh the loss of a family-sized house against their local housing policy, since converting a larger house into several flats reduces the stock of homes suited to families even as it adds smaller units. We take that policy context into account when advising on layout and unit numbers, rather than simply maximising the number of flats the floor area could technically support.
What sound insulation is required between flats?
Part E of the building regulations sets minimum sound insulation standards for the walls and floors separating flats, covering both airborne and impact sound. Where an existing house is subdivided, the drawings specify how the party floors and walls between units will be upgraded — additional layers, resilient bars, or a floating floor — and pre-completion sound testing is normally required before the flats can be signed off. Getting this detail right on the drawings from the outset matters, because retrofitting sound insulation after a failed test usually means taking up a finished floor or ceiling that has already been decorated.
How do you design fire escape and compartmentation for flat conversions?
Each flat needs its own independent means of escape to a place of safety, and the building has to be compartmented so that fire in one flat does not spread into another or into the shared circulation space. On a typical converted house this means fire-rated floors, walls and doors between units, and either a protected common stairway shared by the flats or separate final exits for each one, depending on the layout.
Where flats sit above ground floor level, escape routes and fire doors are designed together with the sound insulation upgrade, since the same floor and wall build-ups often need to satisfy both requirements at once.
| Conversion | Typical scope | Route | Fee from |
|---|---|---|---|
| House to two self-contained flats | Vertical split, separate or shared entrance | Full planning plus building regulations | £1,600 |
| House to three or more flats | Multiple units, fire strategy required | Full planning plus building regs plus structural | £2,400 |
| Flat conversion with a side or rear extension | Additional floor area added to create compliant units | Full planning plus structural calculations | £2,800 |
Flat Conversion Drawings in Kentish Town NW5 — FAQs
Do I need planning permission to convert a house into flats?+
How much do flat conversion drawings cost in London?+
What sound insulation is required between flats?+
Does each flat need a separate fire escape?+
What is the minimum size for a flat in London?+
Do I need planning permission for a rear extension in Camden?+
What is a Basement Impact Assessment and will I need one in Camden?+
Can I make changes to a listed building in Camden?+
How long does Camden take to decide an application?+
How much do planning drawings cost in Camden?+
Get your free Kentish Town planning assessment
Tell us your Kentish Town (NW5) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.