Flat Conversion Drawings in Ealing Broadway W5
Fixed-fee, MCIAT-chartered flat conversion drawings for Ealing Broadway (W5) homeowners — London Borough of Ealing validation and local constraints handled from the start.
Ealing Broadway (W5) is the heart of 'Queen of the Suburbs' Ealing, and the housing reflects it — substantial Victorian and Edwardian villas climbing the hill north of the Broadway, with mansion flats and larger subdivided houses nearer the station. The scale of these plots means loft conversions, rear extensions and outbuildings are common, but so is the conservation-area control that shapes them.
Three conservation areas meet across the district: Mount Park on the higher ground to the north, Ealing Common to the east and Ealing Green to the south. Which one a property falls in changes what is achievable on the roof and front elevation, so we establish the boundary and the borough's guidance before recommending a permitted-development or full-application route.
Planning in Ealing Broadway (W5): what to know before you apply
W5 carries no borough-wide Article 4 direction affecting typical householder work, so many Ealing Broadway houses retain permitted development rights for rear and loft projects — but the Mount Park, Ealing Common and Ealing Green conservation areas are the significant exceptions, and the generous villa plots mean extensions are judged closely against neighbouring building and garden lines. London Borough of Ealing does not publish an Article 4 schedule to the national open-data register, so we verify the current position with the council before advising.
Typical Ealing Broadway housing stock
Large late-Victorian and Edwardian villas and semi-detached houses on the hill north of the Broadway, many on generous plots, alongside Edwardian mansion flats and subdivided family houses closer to the station.
Streets we regularly draw for in Ealing Broadway
Mount Park Road · Castlebar Road · The Mall · Grange Road · Uxbridge Road
What W5 is actually built of
Measured from 461 classified residential buildings in W5, not from a description of the area.
Ealing Broadway W5 housing mix
Residential building form across the W5 postcode district, from 461 classified buildings.
| Attached on more than one side | 45% |
|---|---|
| Attached on one side | 42% |
| Detached | 12% |
| Median building footprint | 71 m² |
| Addresses per buildingAbove about 2 means flats and maisonettes dominate | 1.79 |
| Buildings classified | 461 |
Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-08-17.
Flat Conversion Drawings for Ealing Broadway (W5) homes: the package and the process
Converting a house into flats is drawn unit by unit. Each proposed flat needs its layout, its floor area, its own entrance arrangement and its amenity provision shown, along with refuse and cycle storage that meets the standards the council applies to new residential units.
The separation between units is the technical core: floors and walls detailed for fire resistance and sound insulation, a common escape route drawn and protected, and services routed without breaching the compartments. Those details go on the drawings because Building Control assesses them there, not on site.
Conversion suits buildings with the plan depth and stair position to make two workable units. A wide terrace or a large semi can usually be split without landlocking a room, while a narrow plan often cannot give both units light, access and separation at the same time.
Do I need planning permission to convert a house into flats?
Yes, always. Converting a single dwelling into two or more self-contained flats is a change from one home to several, and that subdivision is treated as development requiring a full planning application — there is no permitted development route that allows it, regardless of the property's size or whether the exterior changes at all. The application has to demonstrate that each flat meets space, layout, amenity and parking standards in its own right, not just that the building as a whole is being used sensibly.
Boroughs also weigh the loss of a family-sized house against their local housing policy, since converting a larger house into several flats reduces the stock of homes suited to families even as it adds smaller units. We take that policy context into account when advising on layout and unit numbers, rather than simply maximising the number of flats the floor area could technically support.
What sound insulation is required between flats?
Part E of the building regulations sets minimum sound insulation standards for the walls and floors separating flats, covering both airborne and impact sound. Where an existing house is subdivided, the drawings specify how the party floors and walls between units will be upgraded — additional layers, resilient bars, or a floating floor — and pre-completion sound testing is normally required before the flats can be signed off. Getting this detail right on the drawings from the outset matters, because retrofitting sound insulation after a failed test usually means taking up a finished floor or ceiling that has already been decorated.
How do you design fire escape and compartmentation for flat conversions?
Each flat needs its own independent means of escape to a place of safety, and the building has to be compartmented so that fire in one flat does not spread into another or into the shared circulation space. On a typical converted house this means fire-rated floors, walls and doors between units, and either a protected common stairway shared by the flats or separate final exits for each one, depending on the layout.
Where flats sit above ground floor level, escape routes and fire doors are designed together with the sound insulation upgrade, since the same floor and wall build-ups often need to satisfy both requirements at once.
| Conversion | Typical scope | Route | Fee from |
|---|---|---|---|
| House to two self-contained flats | Vertical split, separate or shared entrance | Full planning plus building regulations | £1,600 |
| House to three or more flats | Multiple units, fire strategy required | Full planning plus building regs plus structural | £2,400 |
| Flat conversion with a side or rear extension | Additional floor area added to create compliant units | Full planning plus structural calculations | £2,800 |
Flat Conversion Drawings in Ealing Broadway W5 — FAQs
Do I need planning permission to convert a house into flats?+
How much do flat conversion drawings cost in London?+
What sound insulation is required between flats?+
Does each flat need a separate fire escape?+
What is the minimum size for a flat in London?+
Do I need planning permission for a rear extension in Ealing?+
What extra control applies in Bedford Park?+
How long does Ealing Council take to decide a householder application?+
Can you help with a loft conversion on a 1930s Ealing semi?+
How much do planning drawings cost in Ealing?+
Get your free Ealing Broadway planning assessment
Tell us your Ealing Broadway (W5) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.