MCIAT chartered drawings · Fixed fees across all 33 London boroughs

Free 2026 London Planning ReportDouble Storey Extension Drawings in Twickenham TW2

Loft conversion bedroom in an Edwardian house in Twickenham, Richmond (TW2)
Twickenham · TW2 · Richmond

Double Storey Extension Drawings in Twickenham TW2

Fixed-fee, MCIAT-chartered double storey extension drawings for Twickenham (TW2) homeowners — London Borough of Richmond upon Thames validation and local constraints handled from the start.

Free Twickenham planning assessment

Tell us your Twickenham (TW2) address and project. A fixed quote and free planning appraisal land within one working day.

No obligation · No spam · Reply within 1 working day

TW2 is Twickenham's suburban heart around Twickenham Green, a district of bay-fronted Victorian and Edwardian homes where owners commonly plan a rear kitchen extension, a side return or a loft conversion to a growing family house.

Because Article 4 directions bite in the Rosecroft Gardens conservation area and on part of First Cross Road, permitted-development rights are curtailed there, so a boundary check comes before any assumption of PD and a full householder application is often the correct route.

Loft conversion bedroom in an Edwardian house in Twickenham, Richmond (TW2)
Isometric illustration of a Twickenham TW2 home double storey extension drawings design
Proposed floor plan
Twickenham TW2

Planning in Twickenham (TW2): what to know before you apply

Outside the designated streets many rear and loft projects still fall under permitted development. Where an Article 4 direction applies, in Rosecroft Gardens or on the named First Cross Road properties, a householder planning application is required for works that would otherwise be permitted.

Typical Twickenham housing stock

This part of Twickenham is largely late-Victorian and Edwardian, with bay-fronted terraces and semi-detached villas around Twickenham Green and the planned Edwardian streets of the Rosecroft Gardens estate.

Streets we regularly draw for in Twickenham

Rosecroft Gardens · Denehurst Gardens · Gladstone Avenue · First Cross Road

What TW2 is actually built of

Measured from 345 classified residential buildings in TW2, not from a description of the area.

Twickenham TW2 housing mix

Residential building form across the TW2 postcode district, from 345 classified buildings.

Attached on more than one side40%
Attached on one side55%
Detached5%
Median building footprint63 m²
Addresses per buildingAbove about 2 means flats and maisonettes dominate1.17
Buildings classified345

Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-08-17.

Double Storey Extension Drawings for Twickenham (TW2) homes: the package and the process

At first-floor level the drawings have to answer for daylight, privacy and massing. That means proposed elevations showing every new window with its position relative to the boundary, a section taken through the extension and the neighbouring building, and a roof form drawn to sit below the existing ridge rather than compete with it.

We draw the neighbouring property alongside your own, because the officer's assessment is comparative — the effect on their windows and outlook is the test. Setting the first floor in from the boundary, and showing that set-back as a dimension, resolves most objections before consultation begins.

At first floor the boundary relationship decides everything. A detached house has room to set the addition in on both sides; a semi has one shared wall and one clear flank; a mid-terrace can usually only go to the rear, where the effect on both neighbours has to be drawn.

Do I need planning permission for a double storey extension in London?

Almost always. Permitted development rights for two-storey extensions are far more restrictive than for single-storey work, particularly on how close the new structure can come to a boundary and how closely its roof pitch and eaves height must match the existing house, so most double storey projects are drawn and submitted as full householder planning applications rather than relying on permitted development.

Where the property sits in a conservation area or is subject to an Article 4 direction, any remaining permitted development allowance for a second storey is typically removed entirely, reinforcing the need for a full application. We check your property's status and your borough's design guidance before drawing.

How do councils control the impact of a double storey extension on neighbours?

Because a second storey introduces new windows and massing at first-floor level, London boroughs apply design guidance aimed specifically at protecting neighbouring light, privacy and outlook.

  • The 45-degree rule, tested at neighbouring windows, to check the extension does not block an unreasonable amount of daylight
  • A common design expectation that a two-storey side extension is set in roughly 1 metre from the shared boundary, rather than built hard against it
  • A first floor commonly set back from the ground floor front elevation, so the upper storey reads as subordinate to the main house from the street
  • Obscure or high-level glazing on flank walls facing directly into a neighbour's garden or windows, to limit overlooking

Matching the roofline and materials

Planning officers assess a double storey extension heavily on how convincingly it reads as part of the original house rather than an addition bolted onto the side. Our drawings match ridge height, roof pitch, eaves detail and brick or render finish to the existing building wherever the design brief allows, which is consistently one of the strongest factors in securing approval without delay or redesign. Where a subtly contrasting material is proposed instead — a different brick tone, or a zinc or slate roof against a tiled original — we set it out clearly on the elevations so the design intent reads as deliberate rather than a mismatch, which is how most London boroughs prefer a genuine design statement to be presented.

Extending once vs twice: single versus double storey
OptionWhat it addsTypical fee
Single-storey rear extensionA ground-floor kitchen-diner only, may qualify for permitted developmentsee Rear Extension Drawings, from £1,100
Double storey side or rear extensionTwo rooms across two floors, usually needs full planningFull Planning pack ~£1,600–£2,400
Double storey + Building Regulations (structural)Combined pack including structural calculations for two-floor loads and foundationsPlanning + Building Regs pack ~£2,200–£3,850
Wraparound (rear + side return)Combines two single-storey extensions into one L-shaped ground floorsee Wraparound Extension Drawings, from £2,200
Sheet from a double storey extension drawings package drawn for a Twickenham property in TW2, showing the existing and proposed arrangement at scale
A sheet from the double storey extension drawings package we submit to London Borough of Richmond upon Thames for Twickenham (TW2) properties.
FAQ

Double Storey Extension Drawings in Twickenham TW2 — FAQs

How much does a double storey extension cost to design in London?+
Double storey extension drawings start from £2,400, covering full planning permission and structural design for the additional floor. A combined planning and building regulations package with full structural calculations runs up to around £3,850, fixed and agreed upfront.
Do I need planning permission to add a second storey?+
In almost all cases, yes. Permitted development rights for two-storey extensions are much tighter than for single-storey work, particularly around boundary distance and roof matching, so we design double storey projects on the assumption a full householder planning application is required.
Will a double storey extension overlook my neighbour's garden?+
That is exactly what planning officers check, using the 45-degree daylight rule alongside boundary set-in and first-floor set-back guidance. Where a new flank window would look directly into a neighbour's garden, we typically specify obscure or high-level glazing to address it before submission rather than after an objection.
Do I need an architect for a double storey extension?+
No. DrawingsDirect is an MCIAT-chartered architectural technologist practice, producing the same council-accepted drawings and in-house structural coordination as an architect, for a fixed fee typically around 30% lower, with structural calculations for the additional floor produced by the same team rather than a separately appointed engineer.
How long does it take to get double storey extension drawings?+
Drawings are typically ready around 7 days from survey. A householder planning application then has a statutory 8-week determination period once submitted.
Do I need planning permission for an extension in Richmond?+
More often than in most boroughs, yes. Richmond has some of the most extensive Article 4 coverage in London, so permitted development cannot be assumed even for modest works — many conservation areas such as Richmond Green, Teddington and Kew Green require a full application. We confirm the exact designation for your address first and design accordingly rather than relying on permitted development.
My Richmond home is near the river — does flood risk affect my application?+
It can. Much of the borough lies within the Thames flood zone, and the council expects flood-risk considerations to be addressed for works near the river in Twickenham, Richmond and Hampton. We evidence flood-risk and finished-floor-level considerations within the application so the council can validate and approve without repeated revisions.
What does Richmond's Article 4 coverage mean in practice?+
Article 4 directions remove permitted development rights across many of Richmond's conservation areas, so alterations that would be automatic elsewhere — dormers, cladding, some rear works — need a full householder application here. We design context-led drawings that respond to the borough's period townscape and river frontage, which is what carries an application to consent in Richmond.
How long does Richmond Council take to decide?+
Richmond determines most householder applications within the statutory eight-week period once validated, though conservation and riverside cases can attract additional consultation. Because so much turns on design detail here, we prepare submissions to the validation checklist with the elevations and materials the council expects, to avoid drawing queries.
How much do planning drawings cost in Richmond?+
We agree a fixed fee before starting, typically around 30% below an architect's fee for the same council-accepted drawings, with free redraws until Richmond approves. Conservation and flood-zone cases require more evidence than a standard extension, so we quote once we understand your address and scheme rather than by the hour.
Free Fixed Quote

Get your free Twickenham planning assessment

Tell us your Twickenham (TW2) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.