MCIAT chartered drawings · Fixed fees across all 33 London boroughs

Free 2026 London Planning ReportDouble Storey Extension Drawings in Edgware HA8

Loft dormer conversion on a 1930s Edgware HA8 Metro-land semi, drawings for Barnet Council planning
Edgware · HA8 · Barnet

Double Storey Extension Drawings in Edgware HA8

Fixed-fee, MCIAT-chartered double storey extension drawings for Edgware (HA8) homeowners — London Borough of Barnet validation and local constraints handled from the start.

Free Edgware planning assessment

Tell us your Edgware (HA8) address and project. A fixed quote and free planning appraisal land within one working day.

No obligation · No spam · Reply within 1 working day

Edgware (HA8) is a planned interwar Metro-land suburb of consistent semis and terraces, including the distinctive 1920s LCC cottage housing of the Watling Estate. Deep gardens and standard hipped-roof forms make rear extensions, hip-to-gable lofts and rear dormers the usual work, most of it within Barnet's householder framework along the historic Edgware Road corridor.

The Watling Estate and Canons Park Estate conservation areas protect the neighbourhood's planned uniformity, controlling frontages, materials and roofscape more tightly than in a typical speculative street. We design extensions that hold the estate's building line, render and hipped-roof rhythm, and prepare conservation-grade drawings where needed so schemes meet Barnet Council's approval standard.

Loft dormer conversion on a 1930s Edgware HA8 Metro-land semi, drawings for Barnet Council planning
Isometric illustration of a Edgware HA8 home double storey extension drawings design
Proposed floor plan
Edgware HA8

Planning in Edgware (HA8): what to know before you apply

No published householder Article 4 direction in Edgware, so most work runs under permitted development or a standard Barnet application. Properties within the Watling Estate or Canons Park Estate conservation areas have reduced permitted-development rights and tighter control on frontages, materials and roof alterations to preserve the planned interwar character.

Typical Edgware housing stock

Edgware (HA8) is a quintessential Metro-land suburb of 1920s-30s semis and short terraces, from speculative bay-fronted pairs to the planned 1920s LCC cottage houses of the Watling Estate. Consistent hipped roofs, rendered gables and long rear gardens make loft dormers and rear extensions the typical projects.

Streets we regularly draw for in Edgware

Edgwarebury Lane · Hale Drive · Sefton Avenue · Orange Hill Road

What HA8 is actually built of

Measured from 439 classified residential buildings in HA8, not from a description of the area.

Edgware HA8 housing mix

Residential building form across the HA8 postcode district, from 439 classified buildings.

Attached on more than one side42%
Attached on one side52%
Detached5%
Median building footprint58 m²
Addresses per buildingAbove about 2 means flats and maisonettes dominate1.41
Buildings classified439

Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-08-17.

Double Storey Extension Drawings for Edgware (HA8) homes: the package and the process

At first-floor level the drawings have to answer for daylight, privacy and massing. That means proposed elevations showing every new window with its position relative to the boundary, a section taken through the extension and the neighbouring building, and a roof form drawn to sit below the existing ridge rather than compete with it.

We draw the neighbouring property alongside your own, because the officer's assessment is comparative — the effect on their windows and outlook is the test. Setting the first floor in from the boundary, and showing that set-back as a dimension, resolves most objections before consultation begins.

At first floor the boundary relationship decides everything. A detached house has room to set the addition in on both sides; a semi has one shared wall and one clear flank; a mid-terrace can usually only go to the rear, where the effect on both neighbours has to be drawn.

Do I need planning permission for a double storey extension in London?

Almost always. Permitted development rights for two-storey extensions are far more restrictive than for single-storey work, particularly on how close the new structure can come to a boundary and how closely its roof pitch and eaves height must match the existing house, so most double storey projects are drawn and submitted as full householder planning applications rather than relying on permitted development.

Where the property sits in a conservation area or is subject to an Article 4 direction, any remaining permitted development allowance for a second storey is typically removed entirely, reinforcing the need for a full application. We check your property's status and your borough's design guidance before drawing.

How do councils control the impact of a double storey extension on neighbours?

Because a second storey introduces new windows and massing at first-floor level, London boroughs apply design guidance aimed specifically at protecting neighbouring light, privacy and outlook.

  • The 45-degree rule, tested at neighbouring windows, to check the extension does not block an unreasonable amount of daylight
  • A common design expectation that a two-storey side extension is set in roughly 1 metre from the shared boundary, rather than built hard against it
  • A first floor commonly set back from the ground floor front elevation, so the upper storey reads as subordinate to the main house from the street
  • Obscure or high-level glazing on flank walls facing directly into a neighbour's garden or windows, to limit overlooking

Matching the roofline and materials

Planning officers assess a double storey extension heavily on how convincingly it reads as part of the original house rather than an addition bolted onto the side. Our drawings match ridge height, roof pitch, eaves detail and brick or render finish to the existing building wherever the design brief allows, which is consistently one of the strongest factors in securing approval without delay or redesign. Where a subtly contrasting material is proposed instead — a different brick tone, or a zinc or slate roof against a tiled original — we set it out clearly on the elevations so the design intent reads as deliberate rather than a mismatch, which is how most London boroughs prefer a genuine design statement to be presented.

Extending once vs twice: single versus double storey
OptionWhat it addsTypical fee
Single-storey rear extensionA ground-floor kitchen-diner only, may qualify for permitted developmentsee Rear Extension Drawings, from £1,100
Double storey side or rear extensionTwo rooms across two floors, usually needs full planningFull Planning pack ~£1,600–£2,400
Double storey + Building Regulations (structural)Combined pack including structural calculations for two-floor loads and foundationsPlanning + Building Regs pack ~£2,200–£3,850
Wraparound (rear + side return)Combines two single-storey extensions into one L-shaped ground floorsee Wraparound Extension Drawings, from £2,200
Sheet from a double storey extension drawings package drawn for a Edgware property in HA8, showing the existing and proposed arrangement at scale
A sheet from the double storey extension drawings package we submit to London Borough of Barnet for Edgware (HA8) properties.
FAQ

Double Storey Extension Drawings in Edgware HA8 — FAQs

How much does a double storey extension cost to design in London?+
Double storey extension drawings start from £2,400, covering full planning permission and structural design for the additional floor. A combined planning and building regulations package with full structural calculations runs up to around £3,850, fixed and agreed upfront.
Do I need planning permission to add a second storey?+
In almost all cases, yes. Permitted development rights for two-storey extensions are much tighter than for single-storey work, particularly around boundary distance and roof matching, so we design double storey projects on the assumption a full householder planning application is required.
Will a double storey extension overlook my neighbour's garden?+
That is exactly what planning officers check, using the 45-degree daylight rule alongside boundary set-in and first-floor set-back guidance. Where a new flank window would look directly into a neighbour's garden, we typically specify obscure or high-level glazing to address it before submission rather than after an objection.
Do I need an architect for a double storey extension?+
No. DrawingsDirect is an MCIAT-chartered architectural technologist practice, producing the same council-accepted drawings and in-house structural coordination as an architect, for a fixed fee typically around 30% lower, with structural calculations for the additional floor produced by the same team rather than a separately appointed engineer.
How long does it take to get double storey extension drawings?+
Drawings are typically ready around 7 days from survey. A householder planning application then has a statutory 8-week determination period once submitted.
Do I need planning permission for a loft or extension in Barnet?+
Across Finchley, Edgware and Hendon, Barnet's 1930s semis usually keep permitted development rights for rear extensions and hip-to-gable or dormer lofts, so a full application isn't always needed. The major exception is Hampstead Garden Suburb, where an Article 4 direction removes almost all permitted development rights. We check your address first and confirm permitted development with a Lawful Development Certificate where it applies.
What is different about building in Hampstead Garden Suburb?+
The Suburb has one of the most far-reaching Article 4 directions in London: almost all external alterations need planning permission, and the Hampstead Garden Suburb Trust must also consent to changes in parallel with the council. We handle both tracks — a carefully evidenced planning application to Barnet and the Trust's design requirements — since approval there depends on respecting the Arts-and-Crafts character precisely.
Is a hip-to-gable loft conversion allowed on my Barnet semi?+
Usually, yes. The borough's abundant interwar semis are well suited to hip-to-gable and dormer conversions, which frequently qualify as permitted development on semi-detached homes within the volume limits. Outside conservation areas and the Suburb, this is often the quickest route. We confirm eligibility, then produce the planning and building-regulations drawings.
How long does Barnet take to decide an application?+
Barnet determines most householder applications within the statutory eight-week period once validated; Suburb and conservation cases can involve additional consultation. We prepare Barnet submissions to the validation checklist, with the elevations and materials detail the council expects, to avoid the drawing queries that are the usual cause of delay.
How much do Barnet planning drawings cost?+
We agree a fixed fee before we start, typically around 30% below an architect's fee for the same council-accepted drawings, with free redraws until Barnet approves. A straightforward Finchley loft and a Hampstead Garden Suburb application differ in the evidence required, so we quote once we have seen the project and know which route applies.
Free Fixed Quote

Get your free Edgware planning assessment

Tell us your Edgware (HA8) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.