Double Storey Extension Drawings in Collier Row RM5
Fixed-fee, MCIAT-chartered double storey extension drawings for Collier Row (RM5) homeowners — London Borough of Havering validation and local constraints handled from the start.
Collier Row (RM5) took shape as an interwar suburb of Romford, expanding through the 1920s and 1930s across former Essex farmland. It is a planned residential district rather than a historic village core, with predominantly semi-detached housing, so almost every householder project here is an extension or loft on one of those consistent interwar pairs.
There is no conservation area covering Collier Row — that is a genuine, verified fact, not an omission. Its planning character is instead shaped by the uniformity of its interwar suburban roads and by the London Borough of Havering's householder design expectations, which favour keeping the semi-detached rhythm, the gaps between pairs and the original materials intact. We treat that suburban cohesion, rather than a conservation designation, as the reference point when we design an extension.
Demand for rear extensions, two-storey side extensions and hip-to-gable lofts is steady across roads like Mawney Road, Silvermere Avenue and Victoria Avenue, where regular plots and gardens are typical. We check each property's permitted-development position against Havering's borough-wide controls first, then prepare drawings that either stay within permitted development or are ready to validate as a full householder application.
Planning in Collier Row (RM5): what to know before you apply
Because Collier Row's suburban roads repeat so consistently, Havering assess extensions against the established semi-detached pattern, so matching original brick, render and roof form and preserving the gap between pairs matters more than on a mixed-typology road. There is no conservation area and no local Article 4 direction, so many houses retain permitted development rights for rear and loft work — but the finite gardens and shared building lines mean depth, height and neighbour impact are the points a householder application is judged on.
Typical Collier Row housing stock
Predominantly interwar semi-detached houses on planned suburban roads, with postwar and modern infill on regular gardened plots. The consistent pairs and generous front and rear gardens are what makes rear extensions, side extensions and hip-to-gable loft conversions the common projects here.
Streets we regularly draw for in Collier Row
Collier Row Road · Lodge Lane · White Hart Lane · Clockhouse Lane · Mawney Road · Lawns Way · Mashiters Hill · Carter Drive · Ravenswood Close · Hunter's Grove · Silvermere Avenue · Victoria Avenue
What RM5 is actually built of
Measured from 275 classified residential buildings in RM5, not from a description of the area.
Collier Row RM5 housing mix
Residential building form across the RM5 postcode district, from 275 classified buildings.
| Attached on more than one side | 33% |
|---|---|
| Attached on one side | 59% |
| Detached | 7% |
| Median building footprint | 61 m² |
| Addresses per buildingAbove about 2 means flats and maisonettes dominate | 1.08 |
| Buildings classified | 275 |
Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-08-17.
Double Storey Extension Drawings for Collier Row (RM5) homes: the package and the process
At first-floor level the drawings have to answer for daylight, privacy and massing. That means proposed elevations showing every new window with its position relative to the boundary, a section taken through the extension and the neighbouring building, and a roof form drawn to sit below the existing ridge rather than compete with it.
We draw the neighbouring property alongside your own, because the officer's assessment is comparative — the effect on their windows and outlook is the test. Setting the first floor in from the boundary, and showing that set-back as a dimension, resolves most objections before consultation begins.
At first floor the boundary relationship decides everything. A detached house has room to set the addition in on both sides; a semi has one shared wall and one clear flank; a mid-terrace can usually only go to the rear, where the effect on both neighbours has to be drawn.
Do I need planning permission for a double storey extension in London?
Almost always. Permitted development rights for two-storey extensions are far more restrictive than for single-storey work, particularly on how close the new structure can come to a boundary and how closely its roof pitch and eaves height must match the existing house, so most double storey projects are drawn and submitted as full householder planning applications rather than relying on permitted development.
Where the property sits in a conservation area or is subject to an Article 4 direction, any remaining permitted development allowance for a second storey is typically removed entirely, reinforcing the need for a full application. We check your property's status and your borough's design guidance before drawing.
How do councils control the impact of a double storey extension on neighbours?
Because a second storey introduces new windows and massing at first-floor level, London boroughs apply design guidance aimed specifically at protecting neighbouring light, privacy and outlook.
- The 45-degree rule, tested at neighbouring windows, to check the extension does not block an unreasonable amount of daylight
- A common design expectation that a two-storey side extension is set in roughly 1 metre from the shared boundary, rather than built hard against it
- A first floor commonly set back from the ground floor front elevation, so the upper storey reads as subordinate to the main house from the street
- Obscure or high-level glazing on flank walls facing directly into a neighbour's garden or windows, to limit overlooking
Matching the roofline and materials
Planning officers assess a double storey extension heavily on how convincingly it reads as part of the original house rather than an addition bolted onto the side. Our drawings match ridge height, roof pitch, eaves detail and brick or render finish to the existing building wherever the design brief allows, which is consistently one of the strongest factors in securing approval without delay or redesign. Where a subtly contrasting material is proposed instead — a different brick tone, or a zinc or slate roof against a tiled original — we set it out clearly on the elevations so the design intent reads as deliberate rather than a mismatch, which is how most London boroughs prefer a genuine design statement to be presented.
| Option | What it adds | Typical fee |
|---|---|---|
| Single-storey rear extension | A ground-floor kitchen-diner only, may qualify for permitted development | see Rear Extension Drawings, from £1,100 |
| Double storey side or rear extension | Two rooms across two floors, usually needs full planning | Full Planning pack ~£1,600–£2,400 |
| Double storey + Building Regulations (structural) | Combined pack including structural calculations for two-floor loads and foundations | Planning + Building Regs pack ~£2,200–£3,850 |
| Wraparound (rear + side return) | Combines two single-storey extensions into one L-shaped ground floor | see Wraparound Extension Drawings, from £2,200 |
Double Storey Extension Drawings in Collier Row RM5 — FAQs
How much does a double storey extension cost to design in London?+
Do I need planning permission to add a second storey?+
Will a double storey extension overlook my neighbour's garden?+
Do I need an architect for a double storey extension?+
How long does it take to get double storey extension drawings?+
Do I need planning permission to extend a house in Collier Row?+
Is Collier Row in a conservation area?+
How much do planning and building-regulation drawings cost for a Collier Row extension?+
How long does Havering Council take to decide?+
Get your free Collier Row planning assessment
Tell us your Collier Row (RM5) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.